Centre of pressure estimation during walking using only inertial-measurement units and end-to-end statistical modelling

Estimation of the centre of pressure (COP) is an important part of the gait analysis, for example, when evaluating the functional capacity of individuals affected by motor impairment. Inertial measurement units (IMUs) and force sensors are commonly used to measure gait characteristic of healthy and impaired subjects. We present a methodology for estimating the COP solely from raw gyroscope, accelerometer, and magnetometer data from IMUs using statistical modelling. We demonstrate the viability of the method using an example of two models: a linear model and a non-linear Long-Short-Term Memory (LSTM) neural network model. Models were trained on the COP ground truth data measured using an instrumented treadmill and achieved the average intra-subject root mean square (RMS) error between estimated and ground truth COP of 12.3mm and the average inter-subject RMS error of 23.7mm which is comparable or better than similar studies so far. We show that the calibration procedure in the instrumented treadmill can be as short as a couple of minutes without the decrease in our model performance. We also show that the magnetic component of the recorded IMU signal, which is most sensitive to environmental changes, can be safely dropped without a significant decrease in model performance. Finally, we show that the number of IMUs can be reduced to five without deterioration in the model performance.Comment: 21 page

USING REAL-TIME BIOMECHANICAL FEEDBACK TO CHANGE ERGOMETER ROWING TECHNIQUE

Study focuses on improving ergometer rowing technique using biomechanical feedback. Kinetic and kinematic data are acquired during rowing, processed, and compared with reference models based on skilled rowers. Feedback information provides knowledge of performance using concurrent feedback, video feedback, video modelling, and error correction strategies. Based on the real-time feedback, the rower modifies movement towards a proper technique. 36 participants in three groups took part in an evaluation study. One group trained without supervision, one with a trainer, and one with the realtime biomechanical feedback. The results show that participants were able to utilize the provided feedback. The results of training with the biomechanical feedback were much better than training without supervision and comparable to training with a trainer

DIFFERENCES BETWEEN ELITE AND NOVICE ROWERS ON ERGOMETER

The study focuses on how technique of differently skilled rowers is dependent on stroke rate. Five elite and five novice rowers participated, and the selected kinematic and kinetic parameters of rowing on an ergometer were analyzed at stroke rates of 20 strokes/min, 26 strokes/min and 34 strokes/min. The results show that elite rowers use consistent rowing technique at all stroke rates while the technique of novice rowers significantly differs from the elites’ and varies between subjects and with stroke rate. Variation in technique among five elite rowers is small. Although a lack of technique is evident, novice rowers demonstrated a consistent pattern at the same stroke rate. On the basis of the results, the crucial parameters that differentiate elite and novice rowers are indicated

Evaluation of upper extremity robot-assistances in subacute and chronic stroke subjects

<p>Abstract</p> <p>Background</p> <p>Robotic systems are becoming increasingly common in upper extremity stroke rehabilitation. Recent studies have already shown that the use of rehabilitation robots can improve recovery. This paper evaluates the effect of different modes of robot-assistances in a complex virtual environment on the subjects' ability to complete the task as well as on various haptic parameters arising from the human-robot interaction.</p> <p>Methods</p> <p>The MIMICS multimodal system that includes the haptic robot HapticMaster and a dynamic virtual environment is used. The goal of the task is to catch a ball that rolls down a sloped table and place it in a basket above the table. Our study examines the influence of catching assistance, pick-and-place movement assistance and grasping assistance on the catching efficiency, placing efficiency and on movement-dependant parameters: mean reaching forces, deviation error, mechanical work and correlation between the grasping force and the load force.</p> <p>Results</p> <p>The results with groups of subjects (23 subacute hemiparetic subjects, 10 chronic hemiparetic subjects and 23 control subjects) showed that the assistance raises the catching efficiency and pick-and-place efficiency. The pick-and-place movement assistance greatly limits the movements of the subject and results in decreased work toward the basket. The correlation between the load force and the grasping force exists in a certain phase of the movement. The results also showed that the stroke subjects without assistance and the control subjects performed similarly.</p> <p>Conclusions</p> <p>The robot-assistances used in the study were found to be a possible way to raise the catching efficiency and efficiency of the pick-and-place movements in subacute and chronic subjects. The observed movement parameters showed that robot-assistances we used for our virtual task should be improved to maximize physical activity.</p

Psychophysiological responses to different levels of cognitive and physical workload in haptic i nteraction. Robotica

SUMMARY Psychophysiological measurements, which serve as objective indicators of psychological state, have recently been introduced into human-robot interaction. However, their usefulness in haptic interaction is uncertain, since they are influenced by physical workload. This study analyses psychophysiological responses to a haptic task with three different difficulty levels and two different levels of physical load. Four physiological responses were recorded: heart rate, skin conductance, respiratory rate and skin temperature. Results show that mean respiratory rate, respiratory rate variability and skin temperature show significant differences between difficulty levels regardless of physical load and can be used to estimate cognitive workload in haptic interaction

Whole-body isometric force/torque measurements for functional assessment in neuro-rehabilitation: platform design, development and verification

<p>Abstract</p> <p>Background</p> <p>One of the main scientific and technological challenges of rehabilitation bioengineering is the development of innovative methodologies, based on the use of appropriate technological devices, for an objective assessment of patients undergoing a rehabilitation treatment. Such tools should be as fast and cheap to use as clinical scales, which are currently the daily instruments most widely used in the routine clinical practice.</p> <p>Methods</p> <p>A human-centered approach was used in the design and development of a mechanical structure equipped with eight force/torque sensors that record quantitative data during the initiation of a predefined set of Activities of Daily Living (ADL) tasks, in isometric conditions.</p> <p>Results</p> <p>Preliminary results validated the appropriateness, acceptability and functionality of the proposed platform, that has become now a tool used for clinical research in three clinical centres.</p> <p>Conclusion</p> <p>This paper presented the design and development of an innovative platform for whole-body force and torque measurements on human subjects. The platform has been designed to perform accurate quantitative measurements in isometric conditions with the specific aim to address the needs for functional assessment tests of patients undergoing a rehabilitation treatment as a consequence of a stroke.</p> <p>The versatility of the system also enlightens several other interesting possible areas of application for therapy in neurorehabilitation, for research in basic neuroscience, and more.</p

A flexible sensor technology for the distributed measurement of interaction pressure

We present a sensor technology for the measure of the physical human-robot interaction pressure developed in the last years at Scuola Superiore Sant'Anna. The system is composed of flexible matrices of opto-electronic sensors covered by a soft silicone cover. This sensory system is completely modular and scalable, allowing one to cover areas of any sizes and shapes, and to measure different pressure ranges. In this work we present the main application areas for this technology. A first generation of the system was used to monitor human-robot interaction in upper- (NEUROExos; Scuola Superiore Sant'Anna) and lower-limb (LOPES; University of Twente) exoskeletons for rehabilitation. A second generation, with increased resolution and wireless connection, was used to develop a pressure-sensitive foot insole and an improved human-robot interaction measurement systems. The experimental characterization of the latter system along with its validation on three healthy subjects is presented here for the first time. A perspective on future uses and development of the technology is finally drafted

Real-time Hybrid Locomotion Mode Recognition for Lower-limb Wearable Robots

Real-time recognition of locomotion-related activities is a fundamental skill that the controller of lower-limb wearable robots should possess. Subject-specific training and reliance on electromyographic interfaces are the main limitations of existing approaches. This study presents a novel methodology for real-time locomotion mode recognition of locomotion-related activities in lower-limb wearable robotics. A hybrid classifier can distinguish among seven locomotion-related activities. First, a time-based approach classifies between static and dynamical states based on gait kinematics data. Second, an event-based fuzzy logic method triggered by foot pressure sensors operates in a subject-independent fashion on a minimal set of relevant biomechanical features to classify among dynamical modes. The locomotion mode recognition algorithm is implemented on the controller of a portable powered orthosis for hip assistance. An experimental protocol is designed to evaluate the controller performance in an out-of-lab scenario without the need for a subject-specific training. Experiments are conducted on six healthy volunteers performing locomotion-related activities at slow, normal, and fast speeds under the zero-torque and assistive mode of the orthosis. The overall accuracy rate of the controller is 99.4% over more than 10,000 steps, including seamless transitions between different modes. The experimental results show a successful subject-independent performance of the controller for wearable robots assisting locomotion-related activities