Characterisation of an Advanced Nickel Based Superalloy Post Cold Work by Swaging

Cylindrical bars of the advanced nickel based superalloy RR1000 were subjected to swaging to induce approximately 30% cold work. Grain size analysis demonstrated a distinct modification to the microstructure whilst electron back scattered diffraction (EBSD) measurements confirmed the evolution of a relatively strong texture parallel with the longitudinal bar axis. Intragranular strain damage was identified. The effects of the swaging on bulk mechanical properties are illustrated across a range of test temperatures

A new method for quantifying anisotropic martensitic transformation strains accumulated during constrained cooling

Martensitic phase transformations during welding can play a major role in determining the final residual stresses and they can be anisotropic if the transformation occurs under stress. Traditionally, the Satoh test has been used to quantify the response, but it suffers from the fact that the temperature is not uniform along the specimen length, making it difficult to interpret the data. This shortcoming is overcome in our new experimental method using digital image correlation (DIC) to quantify the temperature dependent evolution of the transformation strain locally both parallel and perpendicular to an applied load, in this case for a high-strength low alloy (HSLA) steel and a tough, low transformation temperature weld consumable designed to mitigate tensile weld residual stresses. The method is able to separate the volumetric component of the transformation strain from the deviatoric transformation plasticity component. The volumetric component is shown to be independent of applied load, while the deviatoric component varies approximately linearly with applied load. For the HSLA steel studied here the method also reveals that the transformation start temperature rises under both tensile and compressive loading, confirming previous work. From a weld modelling viewpoint our method provides sufficient information to include the stress dependency of the anisotropic transformation strain in numerical finite element models of the weld process

Strategic sustainable development in the UK construction industry, through the Framework of Strategic Sustainable Development, using Building Information Modelling

The UK Government has set out ambitious plans for all new domestic and commercial buildings to be zero carbon rated by 2016 and 2020 respectively. These are some of the most progressive environmental targets for the built environment in the western world. There are also sustainability principles (SP) that need to be addressed by the UK construction industry, particularly negative impacts such as waste and pollution. Currently, 100 million tonnes of construction waste, including 13 million tonnes of unused materials, is generated each year, with only 20% currently capable of being recycled. The majority of this waste ends up in landfill, contributing to further pollution of the biosphere. The literature suggests that these negative impacts result from a variety of causes, including ineffective leadership, ingrained cultures, outdated technologies and poor logistics. There are a number of innovative projects within the UK, particularly at a local level, that pose the question as to whether bottom up approaches may be more successful than top down policies, as set by national and local government. This paper presents a case study demonstrating the former approach within the construction industry. Research and consultancy has been undertaken collaboratively between industry, academia and professional practice in the production of 15 individually designed sustainable dwellings in the North East of England. This project has employed Building Information Modelling (BIM) as a new collaborative working platform, aligned to the Modern Method of Construction (MMC). By situating this inquiry within an authentic case study it has highlighted currently ineffective strategies, policies and leadership which have prevented full exploitation of the potential of BIM and MMC towards sustainable production. This inquiry supports the integration of the Framework of Sustainable Strategic Development (FSSD) into construction procurement, as a method for implementing bottom up leadership in a value driven project

Residual stress control of multipass welds using low transformation temperature fillers

Low transformation temperature (LTT) weld fillers can be used to replace tensile weld residual stresses with compressive ones and reduce the distortion of single-pass welds in austenitic plates. By contrast, weld fillers in multipass welds experience a number of thermal excursions, meaning that the benefit of the smart LTT fillers may not be realised. Here, neutron diffraction and the contour method are used to measure the residual stress in an eight pass groove weld of a 304 L stainless steel plate using the experimental LTT filler Camalloy 4. Our measurements show that the stress mitigating the effect of Camalloy 4 is indeed diminished during multipass welding. We propose a carefully selected elevated interpass hold temperature and demonstrate that this restores the LTT capability to successfully mitigate residual tensile stresses

Managing Injuries of the Neck Trial (MINT) : design of a randomised controlled trial of treatments for whiplash associated disorders

Background: A substantial proportion of patients with whiplash injuries develop chronic symptoms. However, the best treatment of acute injuries to prevent long-term problems is uncertain. A stepped care treatment pathway has been proposed, in which patients are given advice and education at their initial visit to the emergency department (ED), followed by review at three weeks and physiotherapy for those with persisting symptoms. MINT is a two-stage randomised controlled trial to evaluate two components of such a pathway: 1. use of The Whiplash Book versus usual advice when patients first attend the emergency department; 2. referral to physiotherapy versus reinforcement of advice for patients with continuing symptoms at three weeks. Methods: Evaluation of the Whiplash Book versus usual advice uses a cluster randomised design in emergency departments of eight NHS Trusts. Eligible patients are identified by clinicians in participating emergency departments and are sent a study questionnaire within a week of their ED attendance. Three thousand participants will be included. Patients with persisting symptoms three weeks after their ED attendance are eligible to join an individually randomised study of physiotherapy versus reinforcement of the advice given in ED. Six hundred participants will be randomised. Follow-up is at 4, 8 and 12 months after their ED attendance. Primary outcome is the Neck Disability Index (NDI), and secondary outcomes include quality of life and time to return to work and normal activities. An economic evaluation is being carried out. Conclusion: This paper describes the protocol and operational aspects of a complex intervention trial based in NHS emergency and physiotherapy departments, evaluating two components of a stepped-care approach to the treatment of whiplash injuries. The trial uses two randomisations, with the first stage being cluster randomised and the second individually randomised

Excavating the ‘Rutland Sea Dragon’: The largest ichthyosaur skeleton ever found in the UK (Whitby Mudstone Formation, Toarcian, Lower Jurassic)

An almost complete ichthyosaur skeleton 10 m long was discovered in January 2021 at the Rutland Water Nature Reserve in the county of Rutland, UK. This was excavated by a small team of palaeontologists in the summer of the same year. Nicknamed ‘The Rutland Sea Dragon’, this almost fully articulated skeleton is an example of the large-bodied Early Jurassic ichthyosaur Temnodontosaurus. The specimen was analysed in situ, recorded (including a 3D scan using photogrammetry), excavated and removed from the site in a series of large plaster field jackets to preserve taphonomic information. Significantly, the specimen is the largest ichthyosaur skeleton to have been found in the UK and it may be the first recorded example of Temnodontosaurus trigonodon to be found in the country, extending its known geographic range significantly. It also represents the most complete skeleton of a large prehistoric reptile to have been found in the UK. We provide an account of the discovery and describe the methods used for excavating, recording and lifting the large skeleton which will aid palaeontologists facing similar challenges when collecting extensive remains of large and fragile fossil vertebrates. We also discuss the preliminary research findings and the global impact this discovery has had through public engagement

Increased RPA1 gene dosage affects genomic stability potentially contributing to 17p13.3 duplication syndrome

A novel microduplication syndrome involving various-sized contiguous duplications in 17p13.3 has recently been described, suggesting that increased copy number of genes in 17p13.3, particularly PAFAH1B1, is associated with clinical features including facial dysmorphism, developmental delay, and autism spectrum disorder. We have previously shown that patient-derived cell lines from individuals with haploinsufficiency of RPA1, a gene within 17p13.3, exhibit an impaired ATR-dependent DNA damage response (DDR). Here, we show that cell lines from patients with duplications specifically incorporating RPA1 exhibit a different although characteristic spectrum of DDR defects including abnormal S phase distribution, attenuated DNA double strand break (DSB)-induced RAD51 chromatin retention, elevated genomic instability, and increased sensitivity to DNA damaging agents. Using controlled conditional over-expression of RPA1 in a human model cell system, we also see attenuated DSB-induced RAD51 chromatin retention. Furthermore, we find that transient over-expression of RPA1 can impact on homologous recombination (HR) pathways following DSB formation, favouring engagement in aberrant forms of recombination and repair. Our data identifies unanticipated defects in the DDR associated with duplications in 17p13.3 in humans involving modest RPA1 over-expression

AMPK is essential for energy homeostasis regulation and glucose sensing by POMC and AgRP neurons

Hypothalamic AMP-activated protein kinase (AMPK) has been suggested to act as a key sensing mechanism, responding to hormones and nutrients in the regulation of energy homeostasis. However, the precise neuronal populations and cellular mechanisms involved are unclear. The effects of long-term manipulation of hypothalamic AMPK on energy balance are also unknown. To directly address such issues, we generated POMC alpha 2KO and AgRP alpha 2KO mice lacking AMPK alpha 2 in proopiomelanocortin- (POMC-) and agouti-related protein-expressing (AgRP-expressing) neurons, key regulators of energy homeostasis. POMC alpha 2KO mice developed obesity due to reduced energy expenditure and dysregulated food intake but remained sensitive to leptin. in contrast, AgRPa2KO mice developed an age-dependent lean phenotype with increased sensitivity to a melanocortin agonist. Electrophysiological studies in AMPK alpha 2-deficient POMC or AgRP neurons revealed normal leptin or insulin action but absent responses to alterations in extracellular glucose levels, showing that glucose-sensing signaling mechanisms in these neurons are distinct from those pathways utilized by leptin or insulin. Taken together with the divergent phenotypes of POMC alpha 2KO and AgRP alpha 2KO mice, our findings suggest that while AMPK plays a key role in hypothalamic function, it does not act as a general sensor and integrator of energy homeostasis in the mediobasal hypothalamus

Sarbecoviruses of British Horseshoe Bats; Sequence Variation and Epidemiology

Horseshoe bats are the natural hosts of the Sarbecovirus subgenus that includes SARS-CoV and SARS-CoV- 2. Despite the devastating impact of the COVID-19 pandemic, there is still little known about the underlying epidemiology and virology of sarbecoviruses in their natural hosts, leaving large gaps in our pandemic preparedness. Here we describe the results of PCR testing for sarbecoviruses in the two horseshoe bat species (Rhinolophus hipposideros and R. ferrumequinum) present in Great Britain, collected in 2021–22 during the peak of COVID-19 pandemic. One hundred and ninety seven R. hipposideros samples from 33 roost sites and 277 R. ferrumequinum samples from 20 roost sites were tested. No coronaviruses were detected in any samples from R. ferrumequinum whereas 44 and 56 % of individual and pooled (respectively) faecal samples from R. hipposideros across multiple roost sites tested positive in a sarbecovirus-specific qPCR. Full genome sequences were generated from three of the positive samples (and partial genomes from two more) using Illumina RNAseq on unenriched samples. Phylogenetic analyses showed that the obtained sequences belong to the same monophyletic clade, with >95 % similarity to previously-reported European isolates from R. hipposideros. The sequences differed in the presence or absence of accessory genes ORF 7b, 9b and 10. All lacked the furin cleavage site of SARS-CoV-2 spike gene and are therefore unlikely to be infective for humans. These results demonstrate a lack, or at least low incidence, of SARS-CoV-2 spill over from humans to susceptible GB bats, and confirm that sarbecovirus infection is widespread in R. hipposideros. Despite frequently sharing roost sites with R. ferrumequinum, no evidence of cross-species transmission was found