Impact of Scheduling in the Return-Link of Multi-Beam Satellite MIMO Systems

The utilization of universal frequency reuse in multi-beam satellite systems introduces a non-negligible level of co-channel interference (CCI), which in turn penalizes the quality of service experienced by users. Taking this as starting point, the paper focuses on resource management performed by the gateway (hub) on the return-link, with particular emphasis on a scheduling algorithm based on bipartite graph approach. The study gives important insights into the achievable per-user rate and the role played by the number of users and spot beams considered for scheduling. More interestingly, it is shown that a free-slot assignment strategy helps to exploit the available satellite resources, thus guaranteeing a max-min rate requirement to users. Remarks about the trade-off between efficiency-loss and performance increase are finally drawn at the end of the paper.Comment: Submitted and accepted to IEEE GLOBECOM 2012 Conference, 6 pages, 10 figure

Experimental and Numerical Analysis of the Hydrodynamics around a Vertical Cylinder in Waves

The present study provides an extensive analysis on the hydrodynamics induced by a vertical slender pile under wave action. The authors carried out the study both experimentally and numerically, thus enabling a deep understanding of the flow physics. The experiments took place at a wave flume of the Universita Politecnica delle Marche. Two different experimental campaigns were performed: In the former one, a mobile bed model was realized with the aims to study both the scour process and the hydrodynamics around the cylinder; in the latter one, the seabed was rigid in order to make undisturbed optical measurements, providing a deeper analysis of the hydrodynamics. The numerical investigation was made by performing a direct numerical simulation. A second order numerical discretization, both in time and in space, was used to solve the Navier-Stokes equations while a volume of fluid (VOF) approach was adopted for tracking the free surface. The comparison between experimental and numerical results is provided in terms of velocity, pressure distributions around the cylinder, and total force on it. The analysis of the pressure gradient was used to evaluate the generation and evolution of vortices around the cylinder. Finally, the relation between scour and bed shear stresses due to the structure of the vortex pattern around the pile was assessed. It is worth noting that the physical understanding of this last analysis was enabled by the combined use of experimental data on scour and numerical data on the flow pattern

A photographic method for multi-plane assessment of adolescent posture

To date there have been no photographic methods reported for assessing the standing postural alignment in a manner that can be used in large scale populations. The purpose of this study was to describe a photographic, multi-plane postural measurement method in a pilot group of subjects in a school setting. A total of 83 healthy male adolescents, volunteered for the study, were photographed. The mean age was 14.5 ± 0.7 years (range 14 – 16). The mean height was 170.7 ± 3.5 cm, (range 155 – 187), and the mean weight was 63.2 ± 13.9 kg (range 37 – 110). During procedure, subjects stood on a platform, with specific markers placed on landmarks that could be identified photographically. Photography was accomplished from above, below, each side, and front and back. These six photographs permit views to be projected onto the six sides of an ideal parallelepiped enclosing the body. Five angles were calculated and reported to describe the alignments of the head, shoulders, torso, and pelvis. As expected the means of each of the five angles were small, the absolute value varying from 0 to 7 degrees. This paper describes the results of a simple, practical, and effective way to gather data concerning standing postural alignment in adolescents using a photographic technique. This technique will be used to form a normative database by large-scale studies. Using this approach, a number of angles can be calculated and eventually models can be developed, relating these angles to sitting posture measurements and to symptoms

Implementation and performances of the IPbus protocol for the JUNO Large-PMT readout electronics

The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. Thanks to the tight requirements on its optical and radio-purity properties, it will be able to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range from tens of keV to hundreds of MeV. A key requirement for the success of the experiment is an unprecedented 3% energy resolution, guaranteed by its large active mass (20 kton) and the use of more than 20,000 20-inch photo-multiplier tubes (PMTs) acquired by high-speed, high-resolution sampling electronics located very close to the PMTs. As the Front-End and Read-Out electronics is expected to continuously run underwater for 30 years, a reliable readout acquisition system capable of handling the timestamped data stream coming from the Large-PMTs and permitting to simultaneously monitor and operate remotely the inaccessible electronics had to be developed. In this contribution, the firmware and hardware implementation of the IPbus based readout protocol will be presented, together with the performances measured on final modules during the mass production of the electronics

Mass testing of the JUNO experiment 20-inch PMTs readout electronics

The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose, large size, liquid scintillator experiment under construction in China. JUNO will perform leading measurements detecting neutrinos from different sources (reactor, terrestrial and astrophysical neutrinos) covering a wide energy range (from 200 keV to several GeV). This paper focuses on the design and development of a test protocol for the 20-inch PMT underwater readout electronics, performed in parallel to the mass production line. In a time period of about ten months, a total number of 6950 electronic boards were tested with an acceptance yield of 99.1%

Validation and integration tests of the JUNO 20-inch PMTs readout electronics

The Jiangmen Underground Neutrino Observatory (JUNO) is a large neutrino detector currently under construction in China. JUNO will be able to study the neutrino mass ordering and to perform leading measurements detecting terrestrial and astrophysical neutrinos in a wide energy range, spanning from 200 keV to several GeV. Given the ambitious physics goals of JUNO, the electronic system has to meet specific tight requirements, and a thorough characterization is required. The present paper describes the tests performed on the readout modules to measure their performances.Comment: 20 pages, 13 figure

Measurement of Spontaneous Parametric Downconversion In Atomically Thick Semiconductors

The promises of quantum computing is to enable faster and more powerful computation than would ever be possible with a classical processor based on binary logic. Quantum linear optics is one of many promising platforms to build a universal quantum computers by leveraging the interaction between indistinguishable photons. A common technique to prepare such states is photon heralding, where many identical photons can be generated and used to encode and process information. Photon pairs are typically generated from a second-order nonlinear interaction known as spontaneous parametric downconversion (SPDC). In all existing platforms, materials are used as both a source of optical nonlinearity, and a phase-matching medium, often resulting in narrow-band and non-reconfigurable operation. 2D materials promise to change this, thanks to their high nonlinearity, inherent broadband phase-matching, and highly configurable electro-optical properties. To date SPDC has only been reported in structures with many millions of atoms, stimulating experimental efforts to validate its scaling laws in structures only a few atoms thick. In this thesis we investigate SPDC in group IV transition-metal dichalcogenides (TMDCs), and describe efforts towards the experimental observation of non-resonant SPDC from a diffraction-limited area. Because of the intimate connection between the classical second-harmonic generation (SHG) and the quantum SPDC, the efficiency of one process provides insights on the other. This guides the design of single-photon coincidence measurements required to demonstrate the strong temporal correlations of these entangled states. Measurements are hindered by the presence of a broadband, temporally uncorrelated background, attributed to photoluminescence. This work improves the understanding of the nonlinear quantum optical potential of these crystals, and provides a performance benchmark for these ultra-thin materials

Constraints on downconversion in atomically thick films

Spontaneous parametric downconversion (SPDC) has been predicted in atomically thick crystals, though not yet observed. In this work we uncover physical and experimental constraints of photon-pair generation in such planar nonlinear films with a free-space illumination/collection geometry. We measure the material nonlinear response of monolayer tungsten diselenide via second harmonic generation and subsequently calculate the expected SPDC efficiency from appropriate quantum-classical relations. Energy and momentum conservation shape the wavevectors of photon pairs in free-space and allow us to calculate the loss and coincidence-to-accidental ratio in various configurations. This work improves the understanding of the nonlinear quantum optical potential of these crystals, guides their experimental validation, and provides a performance benchmark for these ultrathin materials.School of Physics, University of Sydney; Australian Research Council (ARC) (CUDOS CE110001010); ARC Discovery Early Career Researcher Award (DECRA) (DE140100805)