Ultrasound assisted crystallization of a new cardioactive prototype using ionic liquid as solvent

6th Meeting of the European-Society-of-Sonochemistry (ESS), 15/04/2019 au 19/04/2019, Besancon.International audienceThis work deals with the antisolvent crystallization of LASSBio-294 (3,4-methylenedioxybenzoyl-2-thienylhydrazon) assisted by ultrasound. An ionic liquid (IL), 1-ethyl-3-methylimidazolium methyl phosphonate [emim][CH3O(H)PO2] was used as solvent and water as antisolvent. The influence of the following parameters on crystals properties (size distribution, morphology, residual solvent and in vitro dissolution) were studied with two mixing mode (quick and dropwise) of solution with antisolvent. The impact of washing and drying process was also evaluated. Comparative studies of conventional crystallization conditions (without ultrasound) were also performed. The effect of ultrasound on LASSBio-294 recrystallized properties was influenced by the add mode, water/IL ratio and drug solution concentration. As example, US promoted the formation of small crystals with high residual IL under the following conditions: quick addition, high drug solution concentration and high water/IL ratio. However, despite the decrease of elementary particle size, ultrasound did not avoid crystals agglomeration. The drug dissolution rate was affected by the physical structure of agglomerates. When employed as drying process of washed crystals, spray drying reduced this agglomeration and improved the dissolution of LASSBio-294 crystals

Agglomeration of a fine and hydrophobic powder by spray drying

International audienc

Novel and safe single-dose treatment of cutaneous leishmaniasis with implantable amphotericin B-Loaded microparticles

International audienceThe development of an effective amphotericin B (AmB) topical formulation to replace the systemically toxic injections currently used in cutaneous leishmaniasis (CL) treatment is challenging due to poor absorption through the skin. Aiming at an effective local chemotherapy, we designed PLGA (poly lactide-co-glycolide acid) microspheres loaded with deoxycholate amphotericin B (d-AmB) for both macrophage intracellular targeting and sustained extracellular release. For that, d-AmB/PLGA microspheres with sizes ranging from 0.5 μm to 20 μm were synthesized and tested both in vitro and in vivo. In vitro, d-AmB/PLGA was more selectively active against intracellular amastigotes of Leishmania amazonensis than free d-AmB (selectivity index = 50 and 25, respectively). In vivo, the efficacy of a single intralesional (i.l) injection with d-AmB/PLGA was determined in early and established BALB/c mouse ear lesions. In early lesions, a single injection given on day 10 of infection was more effective in controlling parasite growth than eight i.l. injections with free d-AmB, as measured on day 120. Such d-AmB/PLGA injection was also effective in established lesions (day 30), leading to 97% parasite burden reduction, as compared with d-AmB or liposomal AmB (Ambisome®) i.l. injection containing the same AmB dose. Pharmacokinetic studies showed that following d-AmB/PLGA injection, AmB leaked slower from non-infected than infected ears, yet remaining in the ear tissue for as long as 30 days. Of interest, AmB was not detectable in the circulating plasma for at least two weeks of d-AmB/PLGA injection, contrasting with the rapid and durable (2 days) detection after free d-AmB injection. Despite the transient ear swelling and local cell infiltration, no alterations in AST, ALT and creatinine serum levels was induced by d-AmB/PLGA. For its approved components, local efficacy, and single-dose applicability, this novel and safe AmB microsphere depot formulation has strong potential as a new therapy for human CL

Determination of drug-polymer solubility from supersaturated spray-dried amorphous solid dispersions: a case study with Efavirenz and Soluplus®

International audienceAmorphous solid dispersions (ASDs) are found to be a well-established strategy for overcoming limited aqueous solubility and poor oral bioavailability of active pharmaceutical ingredients (APIs). One of the main parameters affecting ASDs physical stability is the API solubility in the carrier, because this value determines the maximal API load without a risk of phase separation and recrystallization. Phase-diagrams can be experimentally obtained by following the recrystallization of the API from a supersaturated homogeneous API-polymer solid solution, commonly produced by processes as solvent casting or comilling, which are very time-consuming (hours). The work deals with the construction of a temperature-composition EFV-Soluplus® phase diagram, from a thermal study of recrystallization of a supersaturated solid solution (85 wt% in EFV) generated by spray drying. This supersaturated solution is kept at a given annealing temperature to reach the equilibrium state and the amount that still remains dispersed in the polymer carrier at this equilibrium temperature is determined by means of the new glass transition temperature of the binary mixture. From our knowledge, this is the first study employing a fast process (spray drying) to prepare a supersaturated solid solution of an API in a polymer aiming to determine a temperature-composition phase diagram. The EFV solubility in Soluplus ranges from 20 wt% at 25 °C to 30 wt% at 40 °C. It can be a very useful preformulation tool for researchers studying amorphous solid dispersions of Efavirenz in Soluplus, to assist for predicting the stability of EFV-Soluplus ASDs at different EFV loadings and under different thermal conditions

Improved drug loading via spray drying of a chalcone implant for local treatment of cutaneous leishmaniasis

International audienceCurrent chemotherapy of cutaneous leishmaniasis (CL), even the mildest forms, encompasses multiple and painful injections with toxic drugs that cause systemic adverse effects. Recently, we showed the promising use of poly(lactic-co-glycolic acid) (PLGA) microparticles loaded with an antileishmanial nitrosylated chalcone (CH8) for effective, safe, local, and single-dose treatment of CL. Here, we proposed to optimize the delivery system by increasing the CH8 loading in PLGA-microparticles using spray drying instead of emulsification-solvent evaporation. The effect of solvent composition and polymeric matrix changes on thermal properties, loading efficiency, particle size, morphology, and spatial drug distribution of the CH8-loaded microparticles was evaluated. The results showed that spray drying allowed a higher CH8 content (18% w/w), as contrasting with the previous solvent evaporation technique that maximally incorporated 7.8% of CH8. In vitro studies on 96-hour incubation with L. amazonensis-infected macrophages showed that entrapment in spray-dried PLGA microparticles rendered CH8 safer, preserved its antileishmanial activity, and did not affect its antioxidant properties

Preparation and evaluation of chitosan-hydrophobic silica composite microspheres: Role of hydrophobic silica in modifying their properties

International audienceBiodegradable microspheres used as controlled release systems are important in pharmaceutics. Chitosan biopolymer represents an attractive alternative to other biomaterials because of its significant physicochemical and biological behaviors. Chitosan microspheres are expected to become promising carrier systems for drug and vaccine delivery, especially via oral, mucosal and transdermal routes. Controlling the swelling rate and swelling capacity of the hydrogel and improving the fragile nature of microspheres under acidic conditions are the key challenges that need to be overcome to allow the use of chitosan microspheres for controlled or sustained release specially via these non-invasive administration routes. There have been many studies on the modification of chitosan microsphere structures with cross-linkers, blends with various kinds of polymers and new organic-inorganic hybrid systems in order to obtain some improved properties. In this work, microspheres composed of chitosan and nanosized hydrophobic silica commercialized under the name Aerosil R972 were generated by a method consisting of two steps: first, preparation of a macroscopically homogeneous chitosan-hydrophobic silica dispersion by an optimized procedure, and then drying. Spray drying was the technique used here. FTIR spectroscopy, X-ray powder diffraction, differential scanning calorimetry, thermal gravimetric analysis, Scanning Electron Microscopy (SEM) and high resolution Transmission Electron Microscopy (TEM) were used to characterize the microspheres, besides acid stability, moisture sorption capacity, release properties and biological assays. The chitosan-hydrophobic silica composite microspheres showed improved thermal degradation, lower water affinity, better acid stability and ability to retard rifampicin (drug model) release under simulated gastric conditions. In vitro biocompatibility studies indicated low cytotoxicity and low capacity to activate cell production of the pro-inflammatory mediator nitric oxide, encouraging further studies on the use of the new chitosan-hydrophobic silica composite microspheres as drug carrier systems via oral or nasal routes

Etude de la cristallisation d'une nouvelle molécule à efficacité cardiotonique dans un mélange liquide ionique-eau

National audienc

Depot subcutaneous injection with chalcone CH8-loaded Poly (Lactic-Co-Glycilic Acid) microspheres as a single-dose treatment of cutaneous leishmaniasis

International audienceConventional chemotherapy of cutaneous leishmaniasis (CL) is based on multiple parenteral or intralesional injections with systemically toxic drugs. Aiming at a single-dose localized therapy, biodegradable PLGA (poly-(lactide-co-glycolide) microparticles loaded with 7.8% of an antileishmanial nitrochalcone named CH8 (CH8/PLGA) were constructed to promote sustained subcutaneous release. In vitro, murine macrophages avidly phagocytosed CH8/PLGA smaller than 6μm without triggering oxidative mechanisms. Upon 48-hour incubation, both CH8 and CH8/PLGA were 40 times more toxic to intracellular Leishmania amazonensis than to macrophages. In vivo, BALB/c were given one or three subcutaneous injections in the infected ear with 1.2mg/kg of CH8 in free or CH8/PLGA forms, while controls received three CH8-equivalent doses of naked PLGA microparticles or Glucantime. While a single injection with CH8/PLGA reduced the parasite loads by 91%, triple injections with free CH8 or CH8/PLGA caused 80% and 97% reduction, respectively, in relation to saline controls. Glucantime treatment was the least effective (only 36% reduction) and the most toxic as seen by elevated alanine aminotransferase serum levels. Together, those findings show that CH8/PLGA microparticles can be effectively and safely used for single-dose treatment of CL

Factors influencing the erosion rate and the drug release kinetics from organogels designed as matrices for oral controlled release of a hydrophobic drug

This article proposes solid-like systems from sunflower oil structured with a fibrillar network built by the assembly of 12-hydroxystearic acid (12-HSA), a gelator molecule for an oil phase. The resulting organogels were studied as oral controlled release formulations for a lipophilic drug, Efavirenz (EFV), dissolved in the oil. The effects of the gelator concentration on the thermal properties of the organogels were studied by Differential Scanning Calorimetry (DSC) and showed that drug incorporation did not change the sol–gel–sol transitions. The erosion and drug release kinetics from organogels under conventional (filling gelatin capsules) or multiparticulate (beads obtained by prilling) dosage forms were measured in simulated gastric and intestinal fluids. EFV release profiles were analyzed using model-dependent (curve-fitting) and independent approaches (Dissolution Efficiency DE). Korsmeyer–Peppas was the best fitting release kinetic model based on the goodness of fit, revealing a release mechanism from organogels loaded with EFV different from the simple drug diffusion release mechanism obtained from oily formulations. From organogels, EFV probably diffuses through an outer gel layer that erodes releasing oil droplets containing dissolved EFV into the aqueous medium

Intranasal immunization with chitosan microparticles enhances LACK-DNA vaccine protection and induces specific long-lasting immunity against visceral leishmaniasis

Development of a protective vaccine against Leishmania depends on antigen formulation and adjuvants that induce specific immunity and long-lasting immune responses. We previously demonstrated that BALB/c mice intranasally vaccinated with a plasmid DNA encoding the p36/LACK leishmanial antigen (LACK-DNA) develop a protective immunity for up to 3 months after vaccination, which was linked with the systemic expression of vaccine mRNA in peripheral organs. In this study, LACK-DNA vaccine was associated with biocompatible chitosan microparticles cross-linked with glyceraldehyde (CMC) to boost the long-lasting immunity against the late Leishmania infantum challenge. Infection at 7 days, 3 or 6 months after vaccination resulted in significantly lower parasite loads when compared with non-vaccinated controls. Besides, LACK-DNA-chitosan vaccinated mice showed long-time protection observed after the late time point challenge. The achieved protection was correlated with an enhanced spleen cell responsiveness to parasite antigens, marked by increased proliferation and IFN-γ as well as decreased IL-10 production. Moreover, we found diminished systemic levels of TNF-α that was compatible with the better health condition observed in LACK-DNA/CMC vaccinated-infected mice. Together, our data indicate the feasibility of chitosan microparticles as a delivery system tool to extend the protective immunity conferred by LACK-DNA vaccine, which may be explored in vaccine formulations against Leishmania parasite infections