Selektivno određivanje Fe(III) u uzorcima Fe(II) UV-spektrofotometrijom pomoću kvercetina i morina

Selective UV-spectrophotometric methods for determination of iron(III) in iron(II) samples have been developed. The methods are based on the interaction of Fe(III) with quercetin and morin, compounds of the flavonoid group. Redox reactions occurring between Fe(III) ions and the reagents used make the basis for the detection. Iron(II) does not react with quercetin and morin under the conditions applied [aqueous-methanolic (3 : 2) solutions, 0.3 mol L1 HCl, and 1.2 × 10-4 mol L1 quercetin (morin)] and does not interfere with the determination of Fe(III). Iron(III) can be determined up to 15 μg mL1 using both the examined systems. The detection limits are 0.06 and 0.38 μg mL1 when using quercetin or morin, respectively. The method with quercetin was applied to the determination of Fe(III) (ca. 0.2%) in a Fe(II) pharmaceutical product.U radu je opisan razvoj selektivnih UV-spektrofotometrijskih metoda za određivanje željeza(III) u uzorku željeza(II). Metode se temelje na redoks reakciji Fe(III) sa spojevima iz skupine flavonoida kvercetinom i morinom u reakcijskim uvjetima u kojima željezo(II) ne reagira (vodeno/metanolna otopina 3:2, 0,3 mol L1 HCl, 1,2 x 104 mol L1 kvercetin ili morin). Najniža koncentracija željeza(III) koja se može odrediti je 15 μg mL1 u oba ispitivana sustava. Granice detekcije su 0,06 i 0,38 μg mL1 ako se koristi kvercetin, odnosno morfin. Metoda s kvercetinom primijenjena je za određivanje Fe(III (približno 0,2%) u farmaceutskom produktu Fe(II)

Lipid-coated ruthenium dendrimer conjugated with doxorubicin in anti-cancer drug delivery: Introducing protocols

One of the major limitations for the treatment of many diseases is an inability of drugs to cross the cell membrane barrier. Different kinds of carriers are being investigated to improve drug bioavailability. Among them, lipid or polymer-based systems are of special interest due to their biocompatibility. In our study, we combined dendritic and liposomal carriers and analysed the biochemical and biophysical properties of these formulations. Two preparation methods of Liposomal Locked-in Dendrimers (LLDs) systems have been established and compared. Carbosilane ruthenium metallodendrimer was complexed with an anti-cancer drug (doxorubicin) and locked in a liposomal structure, using both techniques. The LLDs systems formed by hydrophilic locking had more efficient transfection profiles and interacted with the erythrocyte membrane better than systems using the hydrophobic method. The results indicate these systems have improved transfection properties when compared to noncomplexed components. The coating of dendrimers with lipids significantly reduced their hemotoxicity and cytotoxicity. The nanometric size, low polydispersity index and reduced positive zeta potential of such complexes made them attractive for future application in drug delivery. The formulations prepared by the hydrophobic locking protocol were not effective and will not be considered furthermore as prospective drug delivery systems. In contrast, the formulations formed by the hydrophilic loading method have shown promising results where the cytotoxicity of LLD systems with doxorubicin was more effective against cancer than normal cells

Pro Libris: Lubuskie Pismo Literacko-Kulturalne, nr 4 (2008)

172 s. : il

Chimeric Stimuli-Responsive Liposomes as Nanocarriers for the Delivery of the Anti-Glioma Agent TRAM-34

Nanocarriers are delivery platforms of drugs, peptides, nucleic acids and other therapeutic molecules that are indicated for severe human diseases. Gliomas are the most frequent type of brain tumor, with glioblastoma being the most common and malignant type. The current state of glioma treatment requires innovative approaches that will lead to efficient and safe therapies. Advanced nanosystems and stimuli-responsive materials are available and well-studied technologies that may contribute to this effort. The present study deals with the development of functional chimeric nanocarriers composed of a phospholipid and a diblock copolymer, for the incorporation, delivery and pH-responsive release of the antiglioma agent TRAM-34 inside glioblastoma cells. Nanocarrier analysis included light scattering, protein incubation and electron microscopy, and fluorescence anisotropy and thermal analysis techniques were also applied. Biological assays were carried out in order to evaluate the nanocarrier nanotoxicity in vitro and in vivo, as well as to evaluate antiglioma activity. The nanosystems were able to successfully manifest functional properties under pH conditions, and their biocompatibility and cellular internalization were also evident. The chimeric nanoplatforms presented herein have shown promise for biomedical applications so far and should be further studied in terms of their ability to deliver TRAM-34 and other therapeutic molecules to glioblastoma cells

Analysis of model drug release kinetics from complex matrices of polylactide-chitosan

In the present paper the Authors analyse the experimental results of a model drug (ibuprofen) release approximated with three commonly used semi-empirical models: Korsmeyer-Peppas, first order kinetics and Gallagher-Corrigan equation. Drug carriers in the form of films composed of chitosan matrix and polylactide microparticles were produced by ultrasonic emulsification with solvent evaporation followed by film casting technique. Additionally, polylactide shield layers (5μm thick) were attached to both sides of obtained films by means of spray-coating process. A microscopic analysis confirmed the uniform distribution of polylactide microparticles (diameter: 1-2 μm) within chitosan films. Based on the of microscopic study, molecular drug dispersion within composite matrices was found. Fraction of ibuprofen released into medium of pH equal to 1.4 or 7.2 (GI tract) was measured by means of UV-VIS spectrophotometry. The finest approximation was obtained by fitting two-stage release model derived by K. M. Gallagher and O. I. Corrigan to the release data. Analysis of model parameters led to the conclusion that the increase of composite films thickness as well as weight fraction of PLA microparticles within films prolong drug release

Salicylic acid release from chitosan pellets coated with polylactide

The aim of the study was to prepare a bi-polymer drug carrier composed of chitosan pellets (CS) coated with polylactide shell (PLA) providing prolonged model drug – salicylic acid (SA) release into phosphate buffer of pH = 7.2. Pellets were obtained through a coacervation followed by a freeze-drying process. In a terms of model drug loading, porous pellets were impregnated with a SA solution under vacuum. Afterwards, loaded and dried beads were coated with PLA films through their dipping in a PLA organic solution. FTIR spectroscopy was implemented to analyse the efectiveness of SA loading process. The UV-Vis spectrophotometry kinetic studies of a model drug release from PLA coated and non-coated pellets into phosphate buffer were conducted. Increasing time of CS pellets impregnation with SA solution resulted in decrease of salicylic acid release rate.This tendency was more evident for the SA release from pellets coated with an additional layer of PLA. Model drug release kinetic points were well approximated with first order kinetics model

Ion Chromatographic Fingerprinting of STC-1 Cellular Response for Taste Sensing

Taste sensing is of great importance in both the pharmaceutical and foodstuff industries, and is currently mainly based on human sensory evaluation. Many approaches based on chemical sensors have been proposed, leading to the development of various electronic tongue systems. However, this approach is limited by the applied recognition methods, which do not consider natural receptors. Biorecognition elements such as taste receptor proteins or whole cells can be involved in the development of taste sensing biosensors usually equipped with various electrochemical transducers. Here, we propose a new approach: intestinal secretin tumor cell line (STC-1) chemosensory cells were applied for taste recognition, and their taste-specific cellular response was decoded from ion chromatographic fingerprints with the use of multivariate data processing by partial least squares discriminant analysis (PLS-DA). This approach could be useful for the development of various non-invasive taste sensing assays, as well as for studying taste transduction mechanisms in vitro

NOx Photooxidation over Different Noble Metals Modified TiO2

We compared the activity enhancement effect of noble metal deposited on TiO2 in photocatalytic nitrogen oxides oxidation. Titanium dioxide was decorated with Ag, Au, Pt or Pd in the sol-gel process. Synthesized catalysts were characterized by X-ray diffraction (XRD), Brunauer–Emmett–Teller measurement (BET), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and energy dispersive X-ray analysis (EDX). All catalysts together with pure TiO2 obtained by sol-gel (SG) technique were tested for their photocatalytic activity towards nitrogen oxide oxidation (high concentrations of 50, 150 and 250 ppm). FTIR spectrometry was used to determine the gas phase composition and identify TiO2 surface species. The Ag0.1 sample turned out to be deactivated within 60 min of UV/Vis irradiation. Photocatalytic oxidation rate towards NO2 turned to be the highest over SG (photocatalyst without metal deposition). NO2 formation was also observed for Au0.1, Au0.5, Pt0.1, Pt0.5 and Pd0.1. The best NOx removal, i.e., conversion to final product HNO3 was obtained with the Au0.5 photocatalyst