Printed circuit board based segmented quadrupole ion guide

Collisional damping quadrupole ion guides have become popular tools in mass spectrometry. In such devices, ions are cooled by collisions with a buffer gas and focused to trajectories near the axis of the ion guide under the influence of a radio frequency (RF) field. This produces a narrow beam of low-energy ions which can be transported with high efficiency. Typically, quadrupole ion guides are constructed of four parallel rods to which RF voltages are applied. To overcome the dampening of the axial velocity component resulting from collisions with neutral gas particles, an additional static axial field is provided by dividing the rods in several segments and applying an electric potential to each segment. However, this method is mechanically complex, requiring a precise alignment of all segments, and several separate connections for the DC und RF voltages to all segments. In this work, we present a simple and low-cost segmented quadrupole ion guide design that is based on standard printed circuit boards (PCB) including both the segmented electrodes as well as the signal distribution network. Furthermore, we present simulations of the ion movement inside this PCB quadrupole and experimentally evaluate the ion transfer. Our measurements show that the segmented PCB quadrupole with planar electrodes reaches similar ion transmissions in comparison with conventional quadrupole ion guides built from segmented circular rods

A compact high resolution ion mobility spectrometer for fast trace gas analysis

Drift tube ion mobility spectrometers (IMS) are widely used for fast trace gas detection in air, but portable compact systems are typically very limited in their resolving power. Decreasing the initial ion packet width improves the resolution, but is generally associated with a reduced signal-to-noise-ratio (SNR) due to the lower number of ions injected into the drift region. In this paper, we present a refined theory of IMS operation which employs a combined approach for the analysis of the ion drift and the subsequent amplification to predict both the resolution and the SNR of the measured ion current peak. This theoretical analysis shows that the SNR is not a function of the initial ion packet width, meaning that compact drift tube IMS with both very high resolution and extremely low limits of detection can be designed. Based on these implications, an optimized combination of a compact drift tube with a length of just 10 cm and a transimpedance amplifier has been constructed with a resolution of 183 measured for the positive reactant ion peak (RIP+), which is sufficient to e.g. separate the RIP+ from the protonated acetone monomer, even though their drift times only differ by a factor of 1.007. Furthermore, the limits of detection (LODs) for acetone are 180 ppt(v) within 1 s of averaging time and 580 pptv within only 100 ms

A Simple Printed Circuit Board–Based Ion Funnel for Focusing Low m/z Ratio Ions with High Kinetic Energies at Elevated Pressure

Ion funnels are one of the key components for transferring ions from higher pressure into the vacuum. Typically, ion funnels are constructed of several different plate ring electrodes with a decreasing inner diameter where radio frequency (RF) voltages and electric DC fields are applied to the electrodes to focus and transport ion clouds. In this work, we developed and investigated a simple and low-cost ion funnel design that is based on standard printed circuit boards (PCB) with integrated planar electrodes including the signal distribution network. This ion funnel is capable of withstanding high electric fields with superimposed RF voltages due to its buried capacitors. To evaluate the ion focusing efficiency of the ion funnel, we simulated the movement of ions inside this funnel and experimentally evaluated the ion transfer. Our simulations show that a rectangular ion funnel like the PCB ion funnel has similar performance compared with conventional stacked ring funnels. Due to the hundredfold lower parasitic capacitance between the planar electrodes compared with conventional ion funnels, high RF voltage amplitudes up to 195 V and reduced electric DC field strengths up to 100 Td can be reached at a frequency of about 5 MHz. Thus, the funnel is appropriate to focus light ions at elevated pressures up to 20 mbar

High Kinetic Energy Ion Mobility Spectrometry (HiKE-IMS) at 40 mbar

High Kinetic Energy Ion Mobility Spectrometers (HiKE-IMS) are usually operated at an absolute pressure of 20 mbar reaching high reduced electric field strengths of up to 125 Td for controlled reaction kinetics. This significantly increases the linear range and limits chemical cross sensitivities. Furthermore, HiKE-IMS enables the ionization of compounds normally not detectable in ambient pressure IMS, such as benzene, due to new reaction pathways and the inhibition of clustering reactions. In addition, HiKE-IMS allows the observation of additional orthogonal parameters related to an increased ion temperature such as fragmentation and field-dependent ion mobility, which may help to separate compounds that have similar ion mobility under low field conditions. Aiming for a hand-held HiKE-IMS to carry its benefits into field applications, reducing size and power consumption of the vacuum system is necessary. In this work, we present a novel HiKE-IMS design entirely manufactured from standard printed circuit boards (PCB) and experimentally investigate the analytical performance in dependence of the operating pressure between 20 mbar and 40 mbar. Hereby, the limit of detection (LoD) for benzene in purified, dry air (1.4 ppmV water) improved from 7 ppbV at 20 mbar down to 1.8 ppbV at 40 mbar. Furthermore, adding 0.9 ppmV toluene the signal of the benzene B+ peak decreases by only 2 % at 40 mbar. Even in the presence of high relative humidity in the sample gas above 90 % or toluene concentrations of up to 20 ppmV, the LoD for benzene just increases to 9 ppbV at 40 mbar

Formation of positive product ions from substances with low proton affinity in high kinetic energy ion mobility spectrometry

Rationale: Ion mobility spectrometry (IMS) instruments are typically equipped with atmospheric pressure chemical ionization (APCI) sources operated at ambient pressure. However, classical APCI-IMS suffers from a limited ionization yield for nonpolar substances with low proton affinity (PA). This is mainly due to ion clustering processes, especially those that involve water molecules, inhibiting the ionization of these substances. Methods: High Kinetic Energy (HiKE)-IMS instruments are operated at decreased pressures and high reduced electric field strengths. As most clustering reactions are inhibited under these conditions, the ionization yield for nonpolar substances with low PA in HiKE-IMS should differ from that in classical APCI-IMS. To gain first insights into the ionization capabilities and limitations of HiKE-IMS, we investigated the ionization of four model substances with low PA in HiKE-IMS using HiKE-IMS-MS as a function of the reduced electric field strength. Results: The four model substances all have proton affinities between those of H2O and (H2O)2 but exhibit different ionization energies, dipole moments, and polarizabilities. As expected, the results show that the ionization yield for these substances differs considerably at low reduced electric field strengths due to ion cluster formation. In contrast, at high reduced electric field strengths, all substances can be ionized via charge and/or proton transfer in HiKE-IMS. Conclusions: Considering the detection of polar substances with high PAs, classical ambient pressure IMS should reach better detection limits than HiKE-IMS. However, considering the detection of nonpolar substances with low PA that are not detected, or only difficult to detect, at ambient pressure, HiKE-IMS would be beneficial

Influence of Reduced Field Strength on Product Ion Formation in High Kinetic Energy Ion Mobility Spectrometry (HiKE-IMS)

Classical ion mobility spectrometers (IMS) operated at ambient pressure, often use atmospheric pressure chemical ionization (APCI) sources to ionize organic compounds. In APCI, reactant ions ionize neutral analyte molecules via gas-phase ion–molecule reactions. The positively charged reactant ions in purified, dry air are H3O+, NO+, and O2+•. However, the hydration of reactant ions in classical IMS operated at ambient pressure renders ionization of certain analytes difficult. In contrast to classical IMS operated at ambient pressure, High Kinetic Energy Ion Mobility Spectrometers (HiKE-IMS) are operated at a decreased pressure of 10–40 mbar, allowing operation at high reduced electric field strengths of up to 120 Td. At such high reduced field strengths, ions reach high effective temperatures causing collision-induced cluster dissociation of the hydrated gas-phase ions, allowing ionization of nonpolar and low proton affinity analytes. The reactant ion population, consisting of H3O+(H2O)n, NO+(H2O)m, and O2+•(H2O)p with an individual abundance that strongly depends on the reduced field strength, differs from the reactant ion population in IMS operated at ambient pressure, which affects the ionization of analyte molecules. In this work, we investigate the influence of reduced field strength on the product ion formation of aromatic hydrocarbons used as model substances. A HiKE-IMS-MS coupling was used to identify the detected ion species. The results show that the analytes form parent cations via charge transfer with NO+(H2O)m and O2+•(H2O)p depending on ionization energy and protonated parent molecules via proton transfer and ligand switching with H3O+(H2O)n mainly depending on proton affinity

Ultra-high-resolution ion mobility spectrometry : current instrumentation, limitations, and future developments

With recent advances in ionization sources and instrumentation, ion mobility spectrometers (IMS) have transformed from a detector for chemical warfare agents and explosives to a widely used tool in analytical and bioanalytical applications. This increasing measurement task complexity requires higher and higher analytical performance and especially ultra-high resolution. In this review, we will discuss the currently used ion mobility spectrometers able to reach such ultra-high resolution, defined here as a resolving power greater than 200. These instruments are drift tube IMS, traveling wave IMS, trapped IMS, and field asymmetric or differential IMS. The basic operating principles and the resulting effects of experimental parameters on resolving power are explained and compared between the different instruments. This allows understanding the current limitations of resolving power and how ion mobility spectrometers may progress in the future

Detection of Chemical Warfare Agents with a Miniaturized High-Performance Drift Tube Ion Mobility Spectrometer Using High-Energetic Photons for Ionization

A growing demand for low-cost gas sensors capable of detecting the smallest amounts of highly toxic substances in air, including chemical warfare agents (CWAs) and toxic industrial chemicals (TICs), has emerged in recent years. Ion mobility spectrometers (IMS) are particularly suitable for this application due to their high sensitivity and fast response times. In view of the preferred mobile use of such devices, miniaturized ion drift tubes are required as the core of IMS-based lightweight, low-cost, hand-held gas detectors. Thus, we evaluate the suitability of a miniaturized ion mobility spectrometer featuring an ion drift tube length of just 40 mm and a high resolving power of Rp= 60 for the detection of various CWAs, such as nerve agents sarin (GB), tabun (GA), soman (GD), and cyclosarin (GF), as well as the blister agent sulfur mustard (HD), the blood agent hydrogen cyanide (AC) and the choking agent chlorine (CL). We report on the limits of detection reaching minimum concentration levels of, for instance, 29 pptvfor sarin (GB) within an averaging time of only 1 s. Furthermore, we investigate the effects of precursors, simulants, and other common interfering substances on false positive alarms

Measurement of exhaled volatile organic compounds from patients with chronic obstructive pulmonary disease (COPD) using closed gas loop GC-IMS and GC-APCI-MS

Due to its high sensitivity, compact size and low cost Ion Mobility Spectrometry (IMS) has the potential to become a point-of-care breath analyzer. Therefore, we developed a prototype of a compact, closed gas loop IMS with gas chromatographic (GC) pre-separation and high resolving power of R = 90. In this study, we evaluated the performance of this GC-IMS under clinical conditions in a COPD study to find correlations between VOCs (10 ppbv to 1 ppmv) and COPD. Furthermore, in order to investigate possible correlations between ultra-low concentrated breath VOCs (0.1 pptv to 1 ppbv) and COPD, a modified mass spectrometer (MS) with atmospheric pressure chemical ionization (APCI) and GC pre-separation (GC-APCI-MS) was used. The GC-IMS has been used in 58 subjects (21 smokers with moderate COPD, 12 ex-smokers with COPD, 16 healthy smokers and 9 non-smokers). GC-APCI-MS data were available for 94 subjects (21 smokers with moderate COPD, 25 ex-smokers with COPD, 25 healthy smokers and 23 non-smokers). For 44 subjects, a comparison between GC-IMS and GC-APCI-MS data could be performed. Due to service intervals, subject availability and corrupt data, patient numbers were different for GC-APCI-MS and GC-IMS measurements. Using GC-IMS, three VOCs have been found showing a significant difference between healthy controls and patients with COPD. In the GC-APCI-MS data, we only observed one distinctive VOC, which has been identified as 2-pentanone. This proof-of-principle study shows the potential of our high-resolution GC-IMS in the clinical environment. Due to different linear dynamic response ranges, the data of GC-IMS and GC-APCI-MS were only comparable to a limited extent

Negative Reactant Ion Formation in High Kinetic Energy Ion Mobility Spectrometry (HiKE-IMS)

Due to the operation at background pressures between 10-40 mbar and high reduced electric field strengths of up to 120 Td, the ion–molecule reactions in High Kinetic Energy Ion Mobility Spectrometers (HiKE-IMS) differ from those in classical ambient pressure IMS. In the positive ion polarity mode, the reactant ions H+(H2O)n, O2+(H2O)n, and NO+(H2O)n are observed in the HiKE-IMS. The relative abundances of these reactant ion species significantly depend on the reduced electric field strength in the reaction region, the operating pressure, and the water concentration in the reaction region. In this work, the formation of negative reactant ions in HiKE-IMS is investigated in detail. On the basis of kinetic and thermodynamic data from the literature, the processes resulting in the formation of negative reactant ions are kinetically modeled. To verify the model, we present measurements of the negative reactant ion population in the HiKE-IMS and its dependence on the reduced electric field strength as well as the water and carbon dioxide concentrations in the reaction region. The ion species underlying individual peaks in the ion mobility spectrum are identified by coupling the HiKE-IMS to a time-of-flight mass spectrometer (TOF-MS) using a simple gated interface that enables the transfer of selected peaks of the ion mobility spectrum into the TOF-MS. Both the theoretical model as well as the experimental data suggest the predominant generation of the oxygen-based ions O–, OH–, O2–, and O3– in purified air containing 70 ppmv of water and 30 ppmv of carbon dioxide. Additionally, small amounts of NO2– and CO3– are observed. Their relative abundances highly depend on the reduced electric field strength as well as the water and carbon dioxide concentration. An increase of the water concentration in the reaction region results in the generation of OH– ions, whereas increasing the carbon dioxide concentration favors the generation of CO3– ions, as expected