Enhanced Dynamic Bandwidth Allocation Algorithm for Intelligent Home Networks

Internet of Things (IoT) has been seen playing a tremendous change in the Information Technology (IT) environments, and thus its importance has also been realized and played a vital role within Intelligent Home Networks (IHNs). This is because IoT establishes a connection between things and the Internet by utilizing different sensing devices to implement the intelligence to deal with the identification and management of the connected things. IHNs use intelligent systems to perform their daily operations. Meanwhile, these networks ensure comfort, safety, healthcare, automation, energy conservation, and remote management to devices and users. Apart from that, these networks provide assistance in self-healing for faults, power outages, reconfigurations, and more. However, we have realized that more and advanced devices and services continue to be introduced and used in these networks. This has led to competitions of the limited available network resources, services, and bandwidth. In this paper, therefore, we present the design and implementation of a Novel Dynamic Bandwidth Allocation (NoDBA) algorithm to solve the performance bottleneck incurred with IHNs. The proposed algorithm deals with the management of bandwidth and its allocation. In the proposed algorithm, this study integrates two algorithms, namely; Offline Cooperative Algorithm (OCA) and Particle Swarm Optimization (PSO) to improve Quality of Service (QoS). PSO defines the priority limits for subnets and nodes in the network. Meanwhile, OCA facilitates dynamic bandwidth allocation in the network. The Network Simulator-2 (NS-2) was used to simulate and evaluate the NoDBA and it showed improved results compared to the traditional bandwidth allocation algorithms. The obtained results show an average throughput of 92%, average delay of 0.8 seconds, and saves energy consumption of 95% compared to Dynamic QoS-aware Bandwidth Allocation (DQBA) and Data-Driven Allocation (DDA).   Keywords: IHNs, Dynamic Bandwidth Allocation, PSO, OCA, Qo

Paediatric orthopaedic surgery with 3D printing: Improvements and cost reduction

This paper presents a a novel alghorithm of diagnosis and treatment of rigid flatfoot due to tarsal coalition. It introduces a workflow based on 3D printed models, that ensures more efficiency, not only by reducing costs and time, but also by improving procedures in the preoperative clinical phase. Since this paper concerns the development of a new methodology that integrates both engineering and medical fields, it highlights symmetry. An economic comparison is made between the traditional method and the innovative one; the results demonstrate a reduction in costs with the latter. The current, traditional method faces critical issues in diagnosing the pathologies of a limb (such as the foot) and taking decisions for further treatment of the same limb. The proposed alternative methodology thus uses new technologies that are part of the traditional workflow, only replacing the most obsolete ones. In fact, it is increasingly becoming necessary to introduce new technologies in orthopedics, as in other areas of medicine, to offer improved healthcare services for patients. Similar clinical treatments can be performed using the aforementioned technologies, offering greater effectiveness, more simplicity of approach, shorter times, and lower costs. An important technology that fits into this proposed methodology is 3D printing

New methodology for diagnosis of orthopedic diseases through additive manufacturing models

Our purpose is to develop the preoperative diagnosis stage for orthopedic surgical treatments using additive manufacturing technology. Our methods involve fast implementations of an additive manufactured bone model, converted from CAT data, through appropriate software use. Then, additive manufacturing of the formed surfaces through special 3D-printers. With the structural model redesigned and printed in three dimensions, the surgeon is able to look at the printed bone and he can handle it because the model perfectly reproduces the real one upon which he will operate. We found that additive manufacturing models can precisely characterize the anatomical structures of fractures or lesions. The studied practice helps the surgeon to provide a complete preoperative valuation and a correct surgery, with minimized duration and risks. This structural model is also an effective device for communication between doctor and patient

CT conversion workflow for intraoperative usage of bony models: From DICOM data to 3D printed models

This paper presents the application of a low-cost 3D printing technology in pre-operative planning and intra-operative decision-making. Starting from Computed Tomography (CT) scans, we were able to reconstruct a 3D model of the area of interest with a very simple and rapid workflow, using open-source software and an entry level 3D printer. The use of High Temperature Poly-Lactic Acid (HTPLA) by ProtoPasta allowed fabricating sterilizable models, which could be used within the surgical field. We believe that our method is an appealing alternative to high-end commercial products, being superior for cost and speed of production. It could be advantageous especially for small and less affluent hospitals that could produce customized sterilizable tools with little investment and high versatility

Computer-aided surgical simulation for correcting complex limb deformities in children

This work aims to present an in-house low-cost computer-aided simulation (CASS) process that was recently implemented in the preoperative planning of complex osteotomies for limb deformities in children. Five patients admitted to the Unit of Paediatric Orthopaedics and Traumatology from April 2018 to December 2019, for correcting congenital or post-traumatic limb deformities were included in the study. Three-dimensional (3D) digital models were generated from Computed Tomography (CT) scans, using free open-source software, and the surgery was planned and simulated starting from the 3D digital model. 3D printed sterilizable models were fabricated using a low-cost 3D printer, and animations of the operation were generated with the aim to accurately explain the operation to parents. All procedures were successfully planned using our CASS method and the 3D printed models were used during the operation, improving the understanding of the severely abnormal bony anatomy. The surgery was precisely reproduced according to CASS and the deformities were successfully corrected in four cases, while in one case, the intraoperative intentional undersizing of the bone osteotomy produced an incomplete correction of a congenital forearm deformity. Our study describes the application of a safe, effective, user-friendly, and low-cost CASS process in paediatric orthopaedics (PO) surgery. We are convinced that our study will stimulate the widespread adoption of this technological innovation in routine clinical practice for the treatment of rare congenital and post-traumatic limb deformities during childhood