Antimicrobial effectiveness of silver nanoparticles co-stabilized by the bioactive copolymer pluronic F68

Abstract\ud \ud \ud \ud Background\ud \ud Silver nanoparticles (AgNps) have attracted much interest in biomedical engineering, since they have excellent antimicrobial properties. Therefore, AgNps have often been considered for incorporation into medical products for skin pathologies to reduce the risk of contamination. This study aims at evaluating the antimicrobial effectiveness of AgNps stabilized by pluronic™ F68 associated with other polymers such as polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP).\ud \ud \ud \ud Methods\ud \ud AgNps antimicrobial activity was evaluated using the minimum inhibitory concentration (MIC) method. The action spectrum was evaluated for different polymers associated with pluronic™ F68 against the gram negative bacteria P. aeuroginosa and E. coli and the gram positive bacteria S. Aureus.\ud \ud \ud \ud Results\ud \ud AgNps stabilized with PVP or PVA and co-stabilized with pluronic™ F68 are effective against E. coli and P. aeruginosa microorganisms, with MIC values as low as 0.78% of the concentration of the original AgNps dispersion. The antimicrobial action against S. aureus is poor, with MIC values not lower than 25%.\ud \ud \ud \ud Conclusions\ud \ud AgNps stabilized by different polymeric systems have shown improved antimicrobial activity against gram-negative microorganisms in comparison to unstabilized AgNps. Co-stabilization with the bioactive copolymer pluronic™ F68 has further enhanced the antimicrobial effectiveness against both microorganisms. A poor effectiveness has been found against the gram-positive S. aureus microorganism. Future assays are being delineated targeting possible therapeutic applications.This research was supported by grants from FAPESP (Fundação de Amparo à Pesquisa do Estado de São Paulo, Brazil), CAPES (Coordenação de Aperfeiçoamento de Pessoal de Nível Superior, Brazil) and CNPq (Conselho Nacional de Desenvolvimento Científico e Tecnológico, Brazil)

Comparison of methods to detect the in vitro activity of silver nanoparticles (AgNP) against multidrug resistant bacteria

Abstract\ud \ud Background\ud Multidrug resistant microorganisms are a growing challenge and new substances that can be useful to treat infections due to these microorganisms are needed. Silver nanoparticle may be a future option \ud for treatment of these infections, however, the methods described in vitro to evaluate the inhibitory effect are controversial.\ud \ud \ud Results\ud This study evaluated the in vitro activity of silver nanoparticles against 36 susceptible and 54 multidrug resistant Gram-positive and Gram-negative bacteria from clinical sources. The multidrug resistant bacteria were oxacilin-resistant Staphylococcus aureus, vancomycin-resistant Enterococcus spp., carbapenem- and polymyxin B-resistant A. baumannii, carbapenem-resistant P. aeruginosa and carbapenem-resistant Enterobacteriaceae. We analyzed silver nanoparticles stabilized with citrate, chitosan and polyvinyl alcohol and commercial silver nanoparticle. Silver sulfadiazine and silver nitrate were used as control. Different methods were used: agar diffusion, minimum inhibitory concentration, minimum bactericidal concentration and time-kill. The activity of AgNPs using diffusion in solid media and the MIC methods showed similar effect against MDR and antimicrobial-susceptible isolates, with a higher effect against Gram-negative isolates. The better results were achieved with citrate and chitosan silver nanoparticle, both with MIC90 of 6.75 μg mL−1, which can be due the lower stability of these particles and, consequently, release of Ag+ ions as revealed by X-ray diffraction (XRD). The bactericidal effect was higher against antimicrobial-susceptible bacteria.\ud \ud \ud Conclusion\ud It seems that agar diffusion method can be used as screening test, minimum inhibitory concentration/minimum bactericidal concentration and time kill showed to be useful methods. The activity of commercial silver nanoparticle and silver controls did not exceed the activity of the citrate and chitosan silver nanoparticles. The in vitro inhibitory effect was stronger against Gram-negative than Gram-positive, and similar against\ud multidrug resistant and susceptible bacteria, with best result achieved using citrate and chitosan silver nanoparticles. The bactericidal effect of silver nanoparticle may, in the future, be translated into important therapeutic and clinical options, especially considering the shortage of new antimicrobials against the emerging antimicrobial resistant microorganisms, in particular against Gram-negative bacteria.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) awarded to Nanobiotec Project number1290/2009

Bacterial cellulose production by Gluconacetobacter xylinus by employing alternative culture media

Bacterial cellulose (BC) is used in different fields as a biological material due to its unique properties. Despite there being many BC applications, there still remain many problems associated with bioprocess technology, such as increasing productivity and decreasing production cost. New technologies that use waste from the food industry as raw materials for culture media promote economic advantages because they reduce environmental pollution and stimulate new research for science sustainability. For this reason, BC production requires optimized conditions to increase its application. The main objective of this study was to evaluate BC production by Gluconacetobacter xylinus using industry waste, namely, rotten fruits and milk whey, as culture media. Furthermore, the structure of BC produced at different conditions was also determined. The culture media employed in this study were composed of rotten fruit collected from the disposal of free markets, milk whey from a local industrial disposal, and their combination, and Hestrin and Schramm media was used as standard culture media. Although all culture media studied produced BC, the highest BC yield60 mg/mLwas achieved with the rotten fruit culture. Thus, the results showed that rotten fruit can be used for BC production. This culture media can be considered as a profitable alternative to generate high-value products. In addition, it combines environmental concern with sustainable processes that can promote also the reduction of production cost.The authors would like to acknowledge the Brazil National Council of Technological and Scientific Development (CNPq, FAPESP, and CAPES), the financial support from FAPESP 2009/14897-7, and Fundacao para a Ciencia e a Tecnologia (FCT)/Portugal through the project PTDC/EBB-EBI/112170/2009 for the financial support and scholarship. Special thanks to Talita Almeida Vicentin for technical support

Crystallization in Fluidized Bed Reactors: From Fundamental Knowledge to Full-Scale Applications

A review is presented on fifty years of research on crystallization in fluidized bed reactors (FBRs). FBRs are suitable for recovery of slightly soluble compounds from aqueous solutions, as it yields large, millimeter sized particles, which are suitable for reuse and permits low liquid residence times in the timescale of minutes. Full-scale applications for water softening have been applied since the 1980s, and since then, new applications have been developed or are in development for recovery of phosphorus, magnesium, fluoride, metals, sulfate, and boron. Process integration with membrane, adsorption, and biological processes have led to improved processes and environmental indicators. Recently, novel FBR concepts have been proposed, such as the aerated FBR for chemical-free precipitation of calcium carbonate, the seedless FBR to yield pure particulate products, a circulating FBR for economic recovery and extended use of seeds, as well as coupled FBRs for separation of chiral compounds and FBRs in precipitation with supercritical fluids. Advances are reported in the understanding of elementary phenomena in FBRs and on mathematical models for fluid dynamics, precipitation kinetics, and FBR systems. Their role is highlighted for process understanding, optimization and control at bench to full-scale. Future challenges are discussed

Environmental Performance of Effluent Conditioning Systems for Reuse in Oil Refining Plants: A Case Study in Brazil

This study aims to evaluate the environmental and energy effects of the reuse of 1.0 m³ of water in a cooling tower obtained from an oil refinery effluent. An arrangement comprising reverse osmosis (RO), evaporation (EV), and crystallization (CR) was created for water desalination. Six process routes were evaluated; for this purpose, each of them was converted into an specific scenario of analysis: S1: pre-treatment with Ethylenediaminetetraacetic acid (EDTA) + RO + EV (multi-effect distillation) + CR; S2: S1 with pre-treatment by BaSO4; S3: with Ca(OH)2/CaCO3/HCl; S4: S3 with waste heat to supply the thermal demand of EV; S5: S3 with steam recompression in EV; and, S6: S3 with HNO3 in place of HCl. The analysis was carried out by attributional LCA for primary energy demand (PED) and global warming (GW) impacts. The comparison was carried out for a reference flow (RF) of: add 1.0 m3 of reused water to a cooling tower with quality to proper functioning of this equipment. S4 presented the best performance among the analyzed possibilities (PED: 11.9 MJ/RF; and GW: 720 gCO2,eq/RF). However, dependence on other refinery sectors makes it inadvisable as a regular treatment option. Thus, S5 appears as the lowest impact scenario in the series (PED: 17.2 MJ/RF; and GW: 1.24 kgCO2,eq/RF), given the pre-treatment technique of RO-fed effluent, and the exclusive use of steam recompression to meet total EV energy demands. Finally, an intrinsic correlation was identified between RO water recovery efficiency and the accumulated PED and GW impacts on the arrangements that operate with heat and electricity

Enhancing urban waste sustainability through community-driven composting in São Paulo megacity

This study addresses the challenge of municipal solid waste management in urban environments, focusing on the case of São Paulo, Brazil. It introduces a community-based, decentralized composting initiative taking place in this city. The initiative began in 2018 by local residents in the city's western region. Community composting took place in public squares using the ''Universidade Federal de Santa Catarina method,'' involving thermophilic decomposition through passive static aeration. Weekly meetings attracted an average of 31 participants from 2018 to 2021. Participants were requested to bring food residues and garden prunings. To construct the compost pile, a layer of straw and thin branches or grass clippings was added to the outer perimeter to create a wall, with weekly feedings during community gatherings for this purpose. This process was repeated weekly until the piles reached a height of around 1.5 m. The compost maturation process was monitored periodically by observing the visual aspect, absence of odors, and temperature. The temperature decreased from approximately 60 °C for a fresh pile to 30 °C when mature, typically after five months. Physico-chemical properties of six piles containing mature compost were analyzed. In the period 2018–2021 over 20 tons of organic waste were composted, resulting in a reduction of approximately 27,662 pounds of CO2 emissions. The compost produced conforms to agricultural standards, with desirable physical and chemical properties, including an acceptable C/N ratio, pH levels, organic matter content, and nutrient concentrations. Heavy metal analyses indicated that the compost's elemental concentrations were well below established limits, ensuring its safety for agricultural use. During the period from 2018 to 2021, more than 20 tons of organic waste underwent composting, leading to a decrease of approximately 27,662 pounds of CO2 emissions. The resulting compost meets agricultural standards, exhibiting favorable physical and chemical characteristics, such as an acceptable C/N ratio, pH levels, organic matter content, and nutrient concentrations. Heavy metals analysis revealed that the elemental concentrations in the compost were significantly below established limits, guaranteeing its safety for agricultural applications. This urban community-driven composting model exemplifies an innovative approach to local waste management, emphasizing citizen engagement, sustainability, and the creation of shared spaces, thereby presenting a viable solution to urban organic waste challenges in São Paulo and beyond

Antimicrobial effectiveness of silver nanoparticles co-stabilized by the bioactive copolymer pluronic F68

Abstract Background Silver nanoparticles (AgNps) have attracted much interest in biomedical engineering, since they have excellent antimicrobial properties. Therefore, AgNps have often been considered for incorporation into medical products for skin pathologies to reduce the risk of contamination. This study aims at evaluating the antimicrobial effectiveness of AgNps stabilized by pluronic™ F68 associated with other polymers such as polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP). Methods AgNps antimicrobial activity was evaluated using the minimum inhibitory concentration (MIC) method. The action spectrum was evaluated for different polymers associated with pluronic™ F68 against the gram negative bacteria P. aeuroginosa and E. coli and the gram positive bacteria S. Aureus. Results AgNps stabilized with PVP or PVA and co-stabilized with pluronic™ F68 are effective against E. coli and P. aeruginosa microorganisms, with MIC values as low as 0.78% of the concentration of the original AgNps dispersion. The antimicrobial action against S. aureus is poor, with MIC values not lower than 25%. Conclusions AgNps stabilized by different polymeric systems have shown improved antimicrobial activity against gram-negative microorganisms in comparison to unstabilized AgNps. Co-stabilization with the bioactive copolymer pluronic™ F68 has further enhanced the antimicrobial effectiveness against both microorganisms. A poor effectiveness has been found against the gram-positive S. aureus microorganism. Future assays are being delineated targeting possible therapeutic applications.</p

Silver Nanoparticles: Therapeutical Uses, Toxicity, and Safety Issues

The promises of nanotechnology have been realized to deliver the greatest scientific and technological advances in several areas. The biocidal activity of Metal nanoparticles in general and silver nanoparticles (AgNPs) depends on several morphological and physicochemical characteristics of the particles. Many of the interactions of the AgNPs with the human body are still poorly understood; consequently, the most desirable characteristics for the AgNPs are not yet well established. Therefore, the development of nanoparticles with well-controlled morphological and physicochemical features for application in human body is still an active area of interdisciplinary research. Effects of the development of technology of nanostructured compounds seem to be so large and comprehensive that probably it will impact on all fields of science and technology. However, mechanisms of safety control in application, utilization, responsiveness, and disposal accumulation still need to be further studied in-depth to ensure that the advances provided by nanotechnology are real and liable to provide solid and consistent progress. This review aims to discuss AgNPs applied in biomedicine and as promising field for insertion and development of new compounds related to medical and pharmacy technology. The review also addresses drug delivery, toxicity issues, and the safety rules concerning biomedical applications of silver nanoparticles

Production, stabilization and characterization of silver nanoparticles coated with bioactive polymers pluronic F68, PVP and PVA

The increasing and alarming panorama of bacterial infections and associated morbidities that occur during medical and hospital procedures makes the development of technologies that aid in controlling such bacterial infections of utmost importance. Recent studies have shown that formulations with metal nanoparticles exhibit good antibacterial properties against a broad spectrum of microorganisms. Moreover, it was demonstrated that some biologically active polymeric materials, when applied in combination with chemical antimicrobial agents, enhance the therapeutic action of the latter. The research effort entertained herein aimed at the physico-chemical characterisation of silver nanoparticles obtained by chemical reduction, stabilised by bioactive polymers polyvinyl alcohol and polyvinylpyrrolidone, and further co-stabilised by pluronic F68. Scanning electron microscopy images of the nanoparticles produced, coated with different stabilisers, have shown that the chemical nature of the stabilisation effect promoted incorporation of pluronic in the nanoparticles and was closely related to an increase in the silver concentration in the nanoparticle samples obtained via energy-dispersive X-ray spectroscopy. The study described herein also shows that the nature of the stabiliser favours the interaction of pluronic F68 with samples containing silver nanoparticles.Project funding by Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP, São Paulo, Brazil) (FAPESP Ref. No., 10/51933-9; 51933-9), is hereby gratefully acknowledged. This work received support from FAPESP and CNPq, National Council for Scientific and Technological Development – Brazil, in the form of Productivity in Research (PQ) fellowships granted to Victor M. Balcão and Marco V. Chaud. The authors are also grateful to CAPES (Coordenação de Aperfeiçoamento de Pessoal de Nível Superior, Brazil) for financial support. The authors have no conflicts of interest whatsoever to declare.info:eu-repo/semantics/publishedVersio