Impact of acidification and protein fortification on thermal properties of rice, potato and tapioca starches and rheological behaviour of their gels

Producción CientíficaThe impact of acidification and non-gluten protein fortification (egg-albumin and soy-protein isolate) on thermal transitions of rice, potato and tapioca starches as well as the viscoelastic properties of their gels prepared at two casting temperatures, 90ºC and 120ºC, was investigated. The thermal and rheological behaviour of starches depended on their botanical origin and were significantly influenced by the presence and type of protein added as well as by the pH of the aqueous dispersion. Acidification to pH 4.5 increased the gelatinization temperature of rice starch in the presence of albumin or soy proteins, while reduced it in the case of tapioca starch, regardless of the presence of proteins. Acidification of rice starch dispersions decreased significantly the apparent gelatinization enthalpy; this effect was even greater in the presence of proteins. The addition of proteins brought about a structuring effect on tapioca gels leading to higher viscoelastic moduli and lower tan δ values. In general, acidification led to weaker gel structures, with more pronounced effect for potato starch, most likely related to its higher phosphate content (charge screening). Much weaker gels were obtained at 120ºC compared to those processed at lower temperatures; however, protein incorporation reinforced gel structure, an effect that was not observed in gels formed at 90º, as also revealed by microstructure analysis using confocal scanning laser microscopy. In conclusion, protein addition and pH adjustments of aqueous starch dispersions can provide an effective means to modulate the functional and textural properties of gel-like starch-based gluten-free formulations.Ministerio de Economía, Industria y Competitividad - FEDER (Projects AGL2012-35088 and AGL2015-63849-C2-2-R)Junta de Castilla y León (programa de apoyo a proyectos de investigación – Ref. VA072P17

Combining symbiotic simulation systems with enterprise data storage systems for real-time decision-making

[EN] A symbiotic simulation system (S3) enables interactions between a physical system and its computational model representation. To support operational decisions, an S3 uses real-time data from the physical system, which is gathered via sensors and saved in an enterprise data storage system (EDSS). Both real-time and historical data are then used as inputs to the different components of an S3. This paper proposes a generic system architecture for an S3 and discusses its integration within EDSSs. The paper also reviews the literature on S3 and analyses how these systems can be used for real-time decision-making.This work has been partially funded by the Staff Mobility programme from the Erasmus+ (2020-2021).Onggo, B.; Corlu, CG.; Juan, AA.; Monks, T.; Torre-Martínez, MRDL. (2021). Combining symbiotic simulation systems with enterprise data storage systems for real-time decision-making. Enterprise Information Systems. 15(2):230-247. https://doi.org/10.1080/17517575.2020.177758723024715

Quantification of temporomandibular joint space in patients with juvenile idiopathic arthritis assessed by cone beam computerized tomography

Objective To describe a method to calculate the total intra-articular volume (inter-osseous space) of the temporomandibular joint (TMJ) determined by cone-beam computed tomography (CBCT). This could be used as a marker of tissue proliferation and different degrees of soft tissue hyperplasia in juvenile idiopathic arthritis (JIA) patients. Materials and Methods Axial single-slice CBCT images of cross-sections of the TMJs of 11 JIA patients and 11 controls were employed. From the top of the glenoid fossa, in the caudal direction, an average of 26 slices were defined in each joint (N = 44). The interosseous space was manually delimited from each slice by using dedicated software that includes a graphic interface. TMJ volumes were calculated by adding the areas measured in each slice. Two volumes were defined: Ve−i and Vi, where Ve−i is the inter-osseous space, volume defined by the borders of the fossa and Vi is the internal volume defined by the condyle. An intra-articular volume filling index (IF) was defined as Ve−i/Vi, which represents the filling of the space. Results The measured space of the intra-articular volume, corresponding to the intra-articular soft tissue and synovial fluid, was more than twice as large in the JIA group as in the control group. Conclusion The presented method, based on CBCT, is feasible for assessing inter-osseus joint volume of the TMJ and delimits a threshold of intra-articular changes related to intra-articular soft tissue proliferation, based on differences in volumes. Intra-articular soft tissue is found to be enlarged in JIA patientsS

Haplotype profile comparisons cetween Spodoptera frugiperda (Lepidoptera: Noctuidae) populations from Mexico with those from Puerto Rico, South America, and the United States and their implications to migratory behavior

Fall armyworm [Spodoptera frugiperda (J. E. Smith)] is a major economic pest throughout the Western Hemisphere of maize, cotton, sorghum, and a variety of agricultural grasses and vegetable crops. Previous studies demonstrated extensive annual migrations occurring as far north as Canada from overwintering locations in southern Florida and Texas. In contrast, migratory behavior in the rest of the hemisphere is largely uncharacterized. Understanding the migration patterns of fall armyworm will facilitate efforts to predict the spread of pesticide resistance traits that repeatedly arise in this species and assess the consequences of changing climatic trends on the infestation range. Four independent fall armyworm colonies derived from widely separated populations in Mexico and two field collections were examined for their mitochondrial cytochrome oxidase I (COI) gene haplotypes and compared with other locations. The Mexico populations were most similar in their haplotype profile to those from Texas and South America, but also displayed some distinctive features. The data extend the haplotype distribution map in the Western Hemisphere and confirm that the previously observed regional differences in haplotype frequencies are stable over time. The Mexico collections were associated with haplotypes rarely found elsewhere, suggesting limited migratory interactions with foreign populations, including those in neighboring Texas.Fil: Nagoshi, Rodney N.. United States Department Of Agriculture. Agricultural Research Service; ArgentinaFil: Rosas Garcia, Ninfa M.. Instituto Politécnico Nacional; MéxicoFil: Meagher, Robert L.. United States Department Of Agriculture. Agricultural Research Service; ArgentinaFil: Fleischer, Shelby J.. State University Of Pennsylvania; Estados UnidosFil: Westbrook, John K.. United States Department Of Agriculture. Agricultural Research Service; ArgentinaFil: Sappington, Thomas W.. United States Department Of Agriculture. Agricultural Research Service; ArgentinaFil: Hay Roe, Mirian. United States Department Of Agriculture. Agricultural Research Service; ArgentinaFil: Thomas, Jean M. G.. United States Department Of Agriculture. Agricultural Research Service; ArgentinaFil: Murúa, María Gabriela. Gobierno de Tucumán. Ministerio de Desarrollo Productivo. Estación Experimental Agroindustrial Obispo Colombres; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentin

Current production trends, farm structures, and economics of the dairy sheep and goat sectors

Dairy small ruminants account for approximately 21% of all sheep and goats in the world, produce around 3.5% of the world's milk, and are mainly located in subtropical-temperate areas of Asia, Europe, and Africa. Dairy sheep are concentrated around the Mediterranean and Black Sea regions, where their dairy products are typical ingredients of the human diet. Dairy goats are concentrated in low-income, fooddeficit countries of the Indian subcontinent, where their products are a key food source, but are also present in high-income, technologically developed countries. This review evaluates the status of the dairy sheep and goat sectors in the world, with special focus on the commercially and technically developed industries in France, Greece, Italy, and Spain (FGIS). Dairy small ruminants account for a minor part of the total agricultural output in France, Italy, and Spain (0.9 to 1.8%) and a larger part in Greece (8.8%). In FGIS, the dairy sheep industry is based on local breeds and crossbreeds raised under semi-intensive and intensive systems and is concentrated in a few regions in these countries. Average flock size varies from small to medium (140 to 333 ewes/farm), and milk yield from low to medium (85 to 216 L/ewe), showing substantial room for improvement. Most sheep milk is sold to industries and processed into traditional cheese types, many of which are Protected Denomination of Origin (PDO) cheeses for gourmet and export markets (e.g., Pecorino, Manchego, and Roquefort). By comparing break-even milk price among FGIS countries, we observed the following: (1) most Greek and French dairy sheep farms were unprofitable, with the exception of the intensive Chios farms of Greece; (2) milk price was aligned with cost of production in Italy; and (3) profitable farms coexisted with unprofitable farms in Spain. In FGIS, dairy goat production is based on local breeds raised under more extensive systems than sheep. Compared with sheep, average dairy goat herds are smaller (36 to 190 does/farm) but milk yield is greater (153 to 589 L/doe), showing room for improvement. Goat milk is mainly processed on-farm into dairy products for national markets, but some PDO goat milk cheeses (e.g., Murcia al Vino) are exported. Processed goat milk is sold for local human consumption or dehydrated for export. Mixed sheep-goat (e.g., Feta) and cow-sheep-goat milk cheeses are common in many countries. Strategies to improve the dairy sheep and goat sectors in these 4 countries are proposed and discussed

Quantitative study of hydration of C3S and C2S by thermal analysis. Evolution and composition of C-S-H gels formed

This research is part of a European project (namely, CODICE project), main objective of which is modelling, at a multi-scale, the evolution of the mechanical performance of non-degraded and degraded cementitious matrices. For that, a series of experiments were planned with pure synthetic tri-calcium silicate (C3S) and bi-calcium silicate (C2S) (main components of the Portland cement clinker) to obtain different calcium–silicate–hydrate (C–S–H) gel structures during their hydration. The characterization of those C–S–H gels and matrices will provide experimental parameters for the validation of the multi-scale modelling scheme proposed. In this article, a quantitative method, based on thermal analyses, has been used for the determination of the chemical composition of the C–S–H gel together with the degree of hydration and quantitative evolution of all the components of the pastes. Besides, the microstructure and type of silicate tetrahedron and mean chain length (MCL) were studied by scanning electron microscopy (SEM) and 29Si magic-angle-spinning (MAS) NMR, respectively. The main results showed that the chemical compositions for the C–S–H gels have a CaO/SiO2 M ratio almost constant of 1.7 for both C3S and C2S compounds. Small differences were found in the gel water content: the H2O/SiO2 M ratio ranged from 2.9 ± 0.2 to 2.6 ± 0.2 for the C3S (decrease) and from 2.4 ± 0.2 to 3.2 ± 0.2 for the C2S (increase). The MCL values of the C–S–H gels, determined from 29Si MAS NMR, were 3.5 and 4 silicate tetrahedron, for the hydrated C3S and C2S, respectively, remaining almost constant at all hydration periods

Thermal-optical analysis for the measurement of elemental carbon (EC) and organic carbon (OC) in ambient air a literature review

Thermal-optical analysis is currently under consideration by the European standardization body (CEN) as the reference method to quantitatively determine organic carbon (OC) and elemental carbon (EC) in ambient air. This paper presents an overview of the critical parameters related to the thermal-optical analysis including thermal protocols, critical factors and interferences of the methods examined, method inter-comparisons, inter-laboratory exercises, biases and artifacts, and reference materials. The most commonly used thermal protocols include NIOSH-like, IMPROVE_A and EUSAAR_2 protocols either with light transmittance or reflectance correction for charring. All thermal evolution protocols are comparable for total carbon (TC) concentrations but the results vary significantly concerning OC and especially EC concentrations. Thermal protocols with a rather low peak temperature in the inert mode like IMPROVE_A and EUSAAR_2 tend to classify more carbon as EC compared to NIOSH-like protocols, while charring correction based on transmittance usually leads to smaller EC values compared to reflectance. The difference between reflectance and transmittance correction tends to be larger than the difference between different thermal protocols. Nevertheless, thermal protocols seem to correlate better when reflectance is used as charring correction method. The difference between EC values as determined by the different protocols is not only dependent on the optical pyrolysis correction method, but also on the chemical properties of the samples due to different contributions from various sources. The overall conclusion from this literature review is that it is not possible to identify the "best" thermal-optical protocol based on literature data only, although differences attributed to the methods have been quantified when possible.This work was undertaken under Mandate M/503 “Standardisation mandate to CEN, CENELEC and ETSI in support of the implementation of the Ambient Air Quality Legislation”, ENX “Ambient air – Measurement of airborne lemental carbon (EC) and organic carbon (OC) in PM 2.5 deposited on filters”.EUR 1,920 APC fee funded by the EC FP7 Post-Grant Open Access PilotPeer reviewe

Adenoviral vector-mediated gene therapy for gliomas: coming of age

INTRODUCTION: Glioblastoma multiforme (GBM) is the most common primary brain tumor in adults and it carries a dismal prognosis. Adenoviral vector (Ad)-mediated gene transfer is being developed as a promising therapeutic strategy for GBM. Preclinical studies have demonstrated safety and efficacy of adenovirus administration into the brain and tumor mass in rodents and into the non-human primates' brain. Importantly, Ads have been safely administered within the tumor resection cavity in humans. AREAS COVERED: This review gives background on GBM and Ads; we describe gene therapy strategies for GBM and discuss the value of combination approaches. Finally, we discuss the results of the human clinical trials for GBM that have used Ads. EXPERT OPINION: The transduction characteristics of Ads, and their safety profile, added to their capacity to achieve high levels of transgene expression have made them powerful vectors for the treatment of GBM. Recent gene therapy successes in the treatment of retinal diseases and systemic brain metabolic diseases encourage the development of gene therapy for malignant glioma. Exciting clinical trials are currently recruiting patients; although, it is the large randomized Phase III controlled clinical trials that will provide the final decision on the success of gene therapy for the treatment of GBM.Fil: Castro, María G.. University of Michigan; Estados UnidosFil: Candolfi, Marianela. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Investigaciones Biomédicas; Argentina. Universidad de Buenos Aires. Facultad de Medicina; ArgentinaFil: Wilson, Thomas J.. University of Michigan; Estados UnidosFil: Calinescu, Alexandra. University of Michigan; Estados UnidosFil: Paran, Christopher. University of Michigan; Estados UnidosFil: Kamran, Neha. University of Michigan; Estados UnidosFil: Koschmann, Carl. University of Michigan; Estados UnidosFil: Moreno Ayala, Mariela Alejandra. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Investigaciones Biomédicas; Argentina. Universidad de Buenos Aires. Facultad de Medicina; ArgentinaFil: Assi, Hikmat. University Of Michigan Medical School;Fil: Lowenstein, Pedro R.. University of Michigan; Estados Unido

When topological derivatives met regularized Gauss-Newton iterations in holographic 3D imaging

We propose an automatic algorithm for 3D inverse electromagnetic scattering based on the combination of topological derivatives and regularized Gauss-Newton iterations. The algorithm is adapted to decoding digital holograms. A hologram is a two-dimensional light interference pattern that encodes information about three-dimensional shapes and their optical properties. The formation of the hologram is modeled using Maxwell theory for light scattering by particles. We then seek shapes optimizing error functionals which measure the deviation from the recorded holograms. Their topological derivatives provide initial guesses of the objects. Next, we correct these predictions by regularized Gauss-Newton techniques devised to solve the inverse holography problem. In contrast to standard Gauss-Newton methods, in our implementation the number of objects can be automatically updated during the iterative procedure by new topological derivative computations. We show that the combined use of topological derivative based optimization and iteratively regularized Gauss-Newton methods produces fast and accurate descriptions of the geometry of objects formed by multiple components with nanoscale resolution, even for a small number of detectors and non convex components aligned in the incidence direction