18 research outputs found

    Rheological Characteristics of Municipal Thickened Excess Activated Sludge (TEAS): Impacts of pH, Temperature, Solid Concentration and Polymer Dose

    Get PDF
    Rheological characterization of sludge is known to be an essential tool to optimize flow, mixing and other process parameters in wastewater treatment plants. This study deals with the characterization of thickened excess activated sludge in comparison to raw primary sludge and excess activated sludge. The effects of key parameters (total solid concentration, temperature, and pH) on the rheology and flow behavior of thickened excess activated sludge were studied. The rheological investigations were carried out for total solid concentration range of 0.9–3.7 %w/w, temperature range of 23–55 °C, and pH range of 3.6–10.0. Different rheological model equations were fitted to the experimental data. The model equations with better fitting were used to calculate the yield stress, apparent, zero-rate, infinite-rate viscosities, flow consistency index, and flow index. The decrease in concentration from 3.7 to 3.1 %w/w resulted in a drastic reduction of yield stress from 27.6 to 11.0 Pa, while a further reduction of yield stress to 1.3 Pa was observed as solid concentration was reduced to 1.3 %w/w. The viscosity at higher shear rate (>600 s−1) decreased from 0.05 Pa·s down to 0.008 Pa·s when the total solid concentration was reduced from 3.7 to 0.9 %. Yield stress decreased from 20.1 Pa down to 8.3 Pa for the Bingham plastic model when the temperature was raised from 25 to 55 °C. Activation energy and viscosity also showed decreasing trends with increasing temperature. Yield stress of thickened excess activated sludge increased from a value of 6.0 Pa to 8.3 Pa when the pH was increased from 3.6 to 10.0. The effect of polymer dose on the rheological behavior of the thickening of excess activated sludge was also investigated, and the optimum polymer dosage for enhanced thickener performance was determined to be 1.3 kg/ton DS

    Sustainability Indices of Thermal Electrical Power Production in Greece

    No full text

    compromise programming model in site selection for construction temporary facilities

    No full text

    Sustainable Real Estate in the Middle East: Challenges and Future Trends

    No full text
    Buildings account for 40-odd percent of energy use, 25% of water consumption and one-third of global greenhouse gas emissions. With such a staggering impact, real estate holds tremendous economic, social and environmental potentialities for the global development agenda. This chapter intends to provide an overview of sustainable real estate in the Middle East by focusing on the state of the industry and identifying the challenges faced by the region. Finally, the trends shaping the future of sustainable real estate are discussed. In conclusion, the initiatives put forth so far have been on an ad hoc rather than systematic basis and the Middle East sustainable real estate industry is still in an incipient state
    corecore