Chromatographic Determination of Cyclopentolate Hydrochloride and Phenylephrine Hydrochloride in the Presence of Their Potential Degradation Products

Abstract Two sensitive, selective, and precise stability-indicating methods have been developed for the simultaneousdetermination of the active pharmaceutical ingredients cyclopentolate hydrochloride (CLO) and phenylephrine hydrochloride (PHE) in their pure forms and in the presence of their degradation products. The methods were applied for the determination of CLO and PHE in a pharmaceutical formulation. Method A was based on isocratic elution HPLC determination. Separation was achieved using a Waters Spherisorb ODS2 C18 analytical column (5 μm particle size) and a mobile phase of 0.1% heptane-1-sulphonic acid sodium salt in methanol–water (80 + 20, v/v). The flow rate was 1.0 mL/min and detection was performed at 210 nm. Method B was an HPTLC- densitometric method using HPTLC silica gel 60 F254 plates and an optimized mobile phase of ethyl acetate–methanol–ammonia (8 + 2 + 0.1, v/v/v). The separated spots were densitometrically scanned at 210 nm. Polynomial equations were used for regression. The developed methods are suitable for the determination of CLO and PHE in their binary mixture and in the presence of their corresponding degradation products. The two methods were validated in compliance with International Conference on Harmonization guidelines and successfully applied for the determination of CLO and PHE as synthetically prepared in laboratory mixtures and in the presence of their possible degradation products. CLO alkaline degradation products were stated as potential impurities in BritishPharmacopoeia. The degradation products were separated and identified by mass spectra. Postulation of a PHE oxidative degradation pathway was suggested. The obtained resultswere statistically analyzed and compared with those obtained by applying the official methods for both drugs.</jats:p

A Validated High-Performance Thin-Layer Chromatographic Method for the Simultaneous Determination of Zofenopril Calcium and Hydrochlorothiazide in the Presence of the Hydrochlorothiazide Impurities: Chlorothiazide and Salamide

Abstract The chromatographic analysis of either process-related impurities or degradation products is very important in the pharmaceutical industry. In this work, a simple, selective, and sensitive HPTLC method was developed and validated for the simultaneous determination of zofenopril calcium (ZOF) and hydrochlorothiazide (HCT) in the presence of the HCT impurities: A) chlorothiazide (CT) and B) salamide, in raw materials and in pharmaceutical formulation. The separation was carried out on HPTLC silica gel 60 F254 using ethyl acetate–glacial acetic acid–triethylamine (10 + 0.1 + 0.1, v/v/v) as a developing system. The separated bands were scanned densitometrically at 270 nm. Polynomial equations were used for the regression. Calibration curves were constructed for ZOF, HCT, CT, and salamide in the ranges of 0.5–10, 0.2–4, 0.05–1.4, and 0.05–1.0 μg/band, respectively. Different parameters affecting the suggested method, including developing systems of varying composition/ratios and different detection wavelengths, were studied to achieve the best resolution and precision with good sensitivity. System suitability parameters were also tested. The proposed method was validated as per the International Conference on Harmonization guidelines and was successfully applied for the quantification of the studied drugs in their pharmaceutical formulation, with no interference from excipients observed. The results obtained by the developed HPTLC method were compared statistically with those obtained by the reported HPLC method using Student’s t and F ratio tests, and no significant difference was obtained, indicating the ability of the proposed method to be used for routine analysis of drug product.</jats:p