Gas Sensing Properties of Single Conducting Polymer Nanowires and the Effect of Temperature

We measured the electronic properties and gas sensing responses of template-grown poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS)-based nanowires. The nanowires have a "striped" structure (gold-PEDOT/PSS-gold), typically 8um long (1um-6um-1um for each section, respectively) and 220 nm in diameter. Single-nanowire devices were contacted by pre-fabricated gold electrodes using dielectrophoretic assembly. A polymer conductivity of 11.5 +/- 0.7 S/cm and a contact resistance of 27.6 +/- 4 kOhm were inferred from measurements of nanowires of varying length and diameter. The nanowire sensors detect a variety of odors, with rapid response and recovery (seconds). The response (R-R0)/R0 varies as a power law with analyte concentration.Comment: 4 figures 8 pages, add 2 reference

Proximity-induced superconductivity in nanowires: Mini-gap state and differential magnetoresistance oscillations

We study proximity-induced superconductivity in gold nanowires as a function of the length of the nanowire, magnetic field, and excitation current. Short nanowires exhibit a sharp superconducting transition, whereas long nanowires show nonzero resistance. At intermediate lengths, however, we observe two sharp transitions; the normal and superconducting regions are separated by what we call the mini-gap phase. Additionally, we detect periodic oscillations in the differential magnetoresistance. We provide a theoretical model for the mini-gap phase as well as the periodic oscillations in terms of the coexistence of proximity-induced superconductivity with a normal region near the center of the wire, created either by temperature or application of a magnetic field.Comment: 11 pages, 4 figure

Evidence of local superconductivity in granular Bi nanowires fabricated by electrodeposition

An unusual enhancement of resistance (i.e., superresistivity) below a certain characteristic temperature Tsr was observed in granular Bi nanowires. This superresistive state was found to be dependent on the applied magnetic field (H) as well as the excitation current (I). The suppression of Tsr by magnetic field resembles that of a superconductor. The observed superresistivity appears to be related to the nucleation of local superconductivity inside the granular nanowire without long-range phase coherence. The phenomenon is reminiscent of the Bose-insulator observed previously in ultra thin two-dimensional (2D) superconducting films and 3D percolative superconducting films.Comment: 11 pages, 5 figures. submitted to PR

Dielectrophoretically Assembled Polymer Nanowires for Gas Sensing

We measured the electronic properties and gas sensing response of nanowires containing segments of poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) that were synthesized using anodic aluminum oxide (AAO) membranes. The nanowires have a "striped" structure of gold-PEDOT/PSS-gold and are typically 8 um long (1 um-6 um-1 um for each section, respectively) and 220 nm in diameter. Dielectrophoretic assembly was used to position single nanowires on pre-fabricated gold electrodes. A polymer conductivity of 11.5 +/- 0.7 S/cm and a contact resistance of 27.6 +/- 4 kOhm were inferred from resistance measurements of nanowires of varying length and diameter. When used as gas sensors, the wires showed a resistance change of 10.5%, 9%, and 4% at the saturation vapor pressure of acetone, methanol and ethanol, respectively. Sensor response and recovery were rapid (seconds) with excellent reproducibility in time and across devices. "Striped" template-grown nanowires are thus intriguing candidates for use in electronic nose vapor sensing systems.Comment: 18 pages 6 figure

In-situ local phase-transitioned MoSe2 in La0.5Sr0.5CoO3-?? heterostructure and stable overall water electrolysis over 1000 hours

Developing efficient bifunctional catalysts for overall water splitting that are earth-abundant, cost-effective, and durable is of considerable importance from the practical perspective to mitigate the issues associated with precious metal-based catalysts. Herein, we introduce a heterostructure comprising perovskite oxides (La0.5Sr0.5CoO3?????) and molybdenum diselenide (MoSe2) as an electrochemical catalyst for overall water electrolysis. Interestingly, formation of the heterostructure of La0.5Sr0.5CoO3????? and MoSe2 induces a local phase transition in MoSe2, 2???H to 1???T phase, and more electrophilic La0.5Sr0.5CoO3????? with partial oxidation of the Co cation owing to electron transfer from Co to Mo. Together with these synergistic effects, the electrochemical activities are significantly improved for both hydrogen and oxygen evolution reactions. In the overall water splitting operation, the heterostructure showed excellent stability at the high current density of 100???mA???cm???2 over 1,000???h, which is exceptionally better than the stability of the state-of-the-art platinum and iridium oxide couple

New first order Raman-active modes in few layered transition metal dichalcogenides

Although the main Raman features of semiconducting transition metal dichalcogenides are well known for the monolayer and bulk, there are important differences exhibited by few layered systems which have not been fully addressed. WSe 2 samples were synthesized and ab-initio calculations carried out. We calculated phonon dispersions and Raman-active modes in layered systems: WSe 2 , MoSe 2 , WS 2 and MoS 2 ranging from monolayers to five-layers and the bulk. First, we confirmed that as the number of layers increase, the E9, E0 and E 2g modes shift to lower frequencies, and the A9 1 and A 1g modes shift to higher frequencies. Second, new high frequency first order A9 1 and A 1g modes appear, explaining recently reported experimental data for WSe 2 , MoSe 2 and MoS 2 . Third, splitting of modes around A9 1 and A 1g is found which explains those observed in MoSe 2 . Finally, exterior and interior layers possess different vibrational frequencies. Therefore, it is now possible to precisely identify few-layered STMD. T he field of 2-Dimensional semiconducting transition metal dichalcogenides (STMDs) is growing very fast mainly due to: a) their moderate band gap which can be used for fabricating electronic devices such as field effect transistors (FETs