An immune algorithm based fuzzy predictive modeling mechanism using variable length coding and multi-objective optimization allied to engineering materials processing

In this paper, a systematic multi-objective fuzzy modeling approach is proposed, which can be regarded as a three-stage modeling procedure. In the first stage, an evolutionary based clustering algorithm is developed to extract an initial fuzzy rule base from the data. Based on this model, a back-propagation algorithm with momentum terms is used to refine the initial fuzzy model. The refined model is then used to seed the initial population of an immune inspired multi-objective optimization algorithm in the third stage to obtain a set of fuzzy models with improved transparency. To tackle the problem of simultaneously optimizing the structure and parameters, a variable length coding scheme is adopted to improve the efficiency of the search. The proposed modeling approach is applied to a real data set from the steel industry. Results show that the proposed approach is capable of eliciting not only accurate but also transparent fuzzy models

An artificial immune systems based predictive modelling approach for the multi-objective elicitation of Mamdani fuzzy rules: a special application to modelling alloys

In this paper, a systematic multi-objective Mamdani fuzzy modeling approach is proposed, which can be viewed as an extended version of the previously proposed Singleton fuzzy modeling paradigm. A set of new back-error propagation (BEP) updating formulas are derived so that they can replace the old set developed in the singleton version. With the substitution, the extension to the multi-objective Mamdani Fuzzy Rule-Based Systems (FRBS) is almost endemic. Due to the carefully chosen output membership functions, the inference and the defuzzification methods, a closed form integral can be deducted for the defuzzification method, which ensures the efficiency of the developed Mamdani FRBS. Some important factors, such as the variable length coding scheme and the rule alignment, are also discussed. Experimental results for a real data set from the steel industry suggest that the proposed approach is capable of eliciting not only accurate but also transparent FRBS with good generalization ability

Multi-objective genetic optimisation for self-organising fuzzy logic control

This is the post-print version of the article. The official published version can be accessed from the link below.A multi-objective genetic algorithm is developed for the purpose of optimizing the rule-base of a Self-Organising Fuzzy Logic Control algorithm (SOFLC). The tuning of the SOFLC optimization is based on selection of the best shaped performance index for modifying the rule-base on-line. A comparative study is conducted between various methods of multi-objective genetic optimisation using the SOFLC algorithm on the muscle relaxant anaesthesia system, which includes a severe non-linearity, varying dynamics and time-delay

Designing power system stabilizer for multimachine power system using neuro-fuzzy algorithm

This paper describes a design procedure for a fuzzy logic based power system stabilizer (FLPSS) and adaptive neuro-fuzzy inference system (ANFIS) and investigates their robustness for a multi-machine power system. Speed deviation of a machine and its derivative are chosen as the input signals to the FLPSS. A four-machine and a two-area power system is used as the case study. Computer simulations for the test system subjected to transient disturbances i.e. a three phase fault, were carried out and the results showed that the proposed controller is able to prove its effectiveness and improve the system damping when compared to a conventional lead-lag based power system stabilizer controller

Evolutionary computing for metals properties modelling

This is a post print version of the article, the official published version can be obtained from the link below.During the last decade Genetic Programming (GP) has emerged as an efficient methodology for teaching computers how to program themselves. This paper presents research work which utilizes GP for developing mathematical equations for the response surfaces that have been generated using hybrid modelling techniques for predicting the properties of materials under hot deformation. Collected data from the literature and experimental work on aluminium are utilized as the initial training data for the GP to develop the mathematical models under different deformation conditions and compositions.Financial support from the UK EPSRC (Engineering and Physical Sciences Research Council) under grant number GR/R70514/01 was used in this study

Modelling of dynamic recrystallisation of 316L stainless steel using a systems approach

This is the post print version of the article. The official published version can be obtained from the link below.Dynamic recrystallisation (DRX) is an important aspect for industrial applications in hot metal working. Although DRX has been known for more than thirty years, its mechanisms have never been precisely investigated, in part because it was not readily possible to make local texture measurements. In the present work, the material behaviour during DRX is investigated and modelled based on the microstructure of 316L stainless steel. The developed model is based on a constitutive equation Modelling technique which incorporates the strain, strain rate and instantaneous temperature for predicting the flow stress of material being deformed under hot conditions.Financial support from the UK EPSRC (Engineering and Physical Sciences Research Council) for their financial support under grant number GR/R70514/01 was used for this study

Effect of changing strain rate on flow stress during hot deformation of type 316L stainless steel

ompression testing has been used with ramped changes in strain rate during deformation, and with changes in strain rate between double deformations to study their effects on flow stress. No systematic deviations from a mechanical equation of state were found for ramped increase or decrease in strain rate, even at the highest experimental ramping rates. In the two deformation tests, static recovery between deformations reduced the initial flow stress below the value for an equation of state by an amount dependent on time. The reduction was increased when strain rate was increased for the second deformation, and the strain interval required to re-establish the equation of state flow stress is uniquely related to the initial reduction in stress

Modelling the flow behaviour, recrystallisation and crystallographic texture in hot deformed Fe-30wt%Ni Austenite

Abstract: The present work describes a hybrid modelling approach developed for predicting the flow behaviour, recrystallisation characteristics and crystallographic texture evolution in a Fe-30wt%Ni austenitic model alloy subjected to hot plane strain compression. A series of compression tests were performed at temperatures between 850 and 1050ºC and strain rates between 0.1 and 10 s-1. The evolution of grain structure, crystallographic texture and dislocation substructure was characterised in detail for a deformation temperature of 950ºC and strain rates of 0.1 and 10 s-1, using electron backscatter diffraction and transmission electron microscopy. The hybrid modelling method utilises a combination of empirical, physically-based and neuro-fuzzy models. The flow stress is described as a function of the applied variables of strain rate and temperature using an empirical model. The recrystallisation behaviour is predicted from the measured microstructural state variables of internal dislocation density, subgrain size and misorientation between subgrains using a physically-based model. The texture evolution is modelled using artificial neural networks

A Dirichlet Process based type-1 and type-2 fuzzy modeling for systematic confidence bands prediction

This paper presents a new methodology for fuzzy logic systems modeling based on the Dirichlet process Gaussian mixture models (DPGMM). The proposed method simultaneously allows for the systematic elicitation of confidence bands as well as the automatic determination of model complexity. This work is new since existing fuzzy model elicitation techniques use ad hoc methods for confidence band estimations, which do not meet the stringent requirements of today's challenging environments where data are sparse, incomplete, and characterized by noise as well as uncertainties. The proposed approach involves an integration of fuzzy and Bayesian topologies and allows for the generation of confidence bands based on both the random and linguistic uncertainties embedded in the data. Additionally, the proposed method provides a “right-first time approach” to fuzzy modeling as it does not require an iterative model complexity determination. In order to see how the proposed framework performs across a variety of challenging data modeling problems, the proposed approach was tested on a nonlinear synthetic dataset as well as two real multidimensional datasets generated by the authors from materials science and bladder cancer studies. Results show that the proposed approach consistently provides better generalization performances than other well-known soft computing modeling frameworks-in some cases, improvements of up to 20% in modeling accuracy were achieved. The proposed method also provides the capability to handle uncertainties via the generation of systematic confidence intervals for informing on model reliability. These results are significant since the generic methodologies developed in this paper should help material scientists as well as clinicians, for example, assess the risks involved in making informed decisions based on model predictions

Improving Transparency in Approximate Fuzzy Modeling Using Multi-objective Immune-Inspired Optimisation

In this paper, an immune inspired multi-objective fuzzy modeling (IMOFM) mechanism is proposed specifically for high-dimensional regression problems. For such problems, prediction accuracy is often the paramount requirement. With such a requirement in mind, however, one should also put considerable efforts in eliciting models which are as transparent as possible, a ‘tricky’ exercise in itself. The proposed mechanism adopts a multi-stage modeling procedure and a variable length coding scheme to account for the enlarged search space due to simultaneous optimisation of the rule-base structure and its associated parameters. We claim here that IMOFM can account for both Singleton and Mamdani Fuzzy Rule-Based Systems (FRBS) due to the carefully chosen output membership functions, the inference scheme and the defuzzification method. The proposed modeling approach has been compared to other representatives using a benchmark problem, and was further applied to a high-dimensional problem, taken from the steel industry, which concerns the prediction of mechanical properties of hot rolled steels. Results confirm that IMOFM is capable of eliciting not only accurate but also transparent FRBSs from quantitative data