Low Fatigue Response of Crest-Fixed Cold-Formed Steel Drape Curved Roof Claddings

Cold-formed steel roof claddings are subjected to significant suction/uplift pressures during high wind events. In New Zealand, the strong prevailing winds makes this a common occurrence. Suction pressures are generated by the turbulence of the wind flow around the building which can vary both spatially and temporally. The weakest link in the roofing system is the connection between roof sheeting and screw fasteners, which if fails, can lead to progressive collapse of the whole roofing assembly. Fluctuating high wind suction pressures can result in either static or fatigue pull-through failure of the roof sheeting at its screw fastener connections. Current literature has covered the static and fatigue wind uplift performance of crest-fixed corrugated and trapezoidal roof claddings. However, no research has been undertaken to understand the wind uplift performance of the typical crest-fixed cold-formed steel drape curved roof claddings used in New Zealand. This issue is addressed herein. In total, 35 large scale experimental tests are presented for crest-fixed drape curved steel roof claddings subjected to static and cyclic wind suction/uplift loads applied using a Pressure Loading Actuator. The material properties of claddings were determined using tensile coupon tests while the initial geometric imperfections of claddings were measured using a laser scanner. The critical fastener reactions were determined using a three axis load cell. Crack initiation, propagation of cracks, crack patterns and the number of load cycles to failure are discussed for such claddings under different load levels. Tests showed that the drape curved roof claddings are also subjected to localised dimpling and pull-through failures at their screw connections under static and cyclic wind uplift loads with the occurrence of low cycle fatigue failures under cyclic loading

The inner centromere is a biomolecular condensate scaffolded by the chromosomal passenger complex.

The inner centromere is a region on every mitotic chromosome that enables specific biochemical reactions that underlie properties, such as the maintenance of cohesion, the regulation of kinetochores and the assembly of specialized chromatin, that can resist microtubule pulling forces. The chromosomal passenger complex (CPC) is abundantly localized to the inner centromeres and it is unclear whether it is involved in non-kinase activities that contribute to the generation of these unique chromatin properties. We find that the borealin subunit of the CPC drives phase separation of the CPC in vitro at concentrations that are below those found on the inner centromere. We also provide strong evidence that the CPC exists in a phase-separated state at the inner centromere. CPC phase separation is required for its inner-centromere localization and function during mitosis. We suggest that the CPC combines phase separation, kinase and histone code-reading activities to enable the formation of a chromatin body with unique biochemical activities at the inner centromere

DIABRISK - SL Prevention of cardio-metabolic disease with life style modification in young urban Sri Lankan's - study protocol for a randomized controlled trial

<p>Abstract</p> <p>Background</p> <p>Urban South-Asian's are predisposed to early onset of type 2 diabetes mellitus (T2DM) and cardiovascular disease (CVD). There is an urgent need for country specific primary prevention strategies to address the growing burden of cardio-metabolic disease in this population. The aim of this clinical trial is to evaluate whether intensive (3-monthly) lifestyle modification advice is superior to a less-intensive (12 monthly; control group) lifestyle modification advice on a primary composite cardio-metabolic end point in 'at risk' urban subjects aged between 5-40 years.</p> <p>Methods/Design</p> <p>This is an open randomised controlled parallel group clinical trial performed at a single centre in Colombo, Sri-Lanka. A cluster sampling strategy was used to select a large representative sample of subjects aged between 5-40 years at high risk of T2DM and CVD for the intervention study. We have screened 23,298 (males 47% females 53%) healthy subjects for four risk factors: obesity, elevated waist circumference, family history of diabetes and physical inactivity, using a questionnaire and anthropometry. Those with two or more risk-factors were recruited to the intervention trial. We aim to recruit 4600 subjects for the intervention trial. The primary composite cardio-metabolic end point is; new onset T2DM, impaired glucose tolerance, impaired fasting glycaemia, new onset hypertension and albuminuria, following 5 years of intervention. The effect of the intervention on pre-specified secondary endpoints will also be evaluated. The study will be conducted according to good clinical and ethical practice, data analysis and reporting guidelines.</p> <p>Discussion</p> <p>DIABRISK-SL is a large population based trial to evaluate the prevalence of diabetes, pre-diabetes and cardio-metabolic risk factors among young urban Sri-Lankans and the effect of a primary prevention strategy on cardio-metabolic disease end points. This work will enable country specific and regional cardio-metabolic risk scores to be derived. Further if the proposed intervention is successful the results of this study can be translated and implemented as a low-cost primary prevention tool in Sri-Lanka and other low/middle income developing countries.</p> <p>Trial registration</p> <p>The trial is registered with the World Health Organisation and Sri-Lanka clinical trial registry number SLCTR/2008/003</p

Approaches to link RNA secondary structures with splicing regulation

In higher eukaryotes, alternative splicing is usually regulated by protein factors, which bind to the pre-mRNA and affect the recognition of splicing signals. There is recent evidence that the secondary structure of the pre-mRNA may also play an important role in this process, either by facilitating or by hindering the interaction with factors and small nuclear ribonucleoproteins (snRNPs) that regulate splicing. Moreover, the secondary structure could play a fundamental role in the splicing of yeast species, which lack many of the regulatory splicing factors present in metazoans. This review describes the steps in the analysis of the secondary structure of the pre-mRNA and its possible relation to splicing. As a working example, we use the case of yeast and the problem of the recognition of the 3-prime splice site.Comment: 21 pages, 7 figure

mRNA Secondary Structures Fold Sequentially But Exchange Rapidly In Vivo

Self-cleavage assays of RNA folding reveal that mRNA structures fold sequentially in vitro and in vivo, but exchange between adjacent structures is much faster in vivo than it is in vitro

Unequal allelic expression of wild-type and mutated β-myosin in familial hypertrophic cardiomyopathy

Familial hypertrophic cardiomyopathy (FHC) is an autosomal dominant disease, which in about 30% of the patients is caused by missense mutations in one allele of the β-myosin heavy chain (β-MHC) gene (MYH7). To address potential molecular mechanisms underlying the family-specific prognosis, we determined the relative expression of mutant versus wild-type MYH7-mRNA. We found a hitherto unknown mutation-dependent unequal expression of mutant to wild-type MYH7-mRNA, which is paralleled by similar unequal expression of β-MHC at the protein level. Relative abundance of mutated versus wild-type MYH7-mRNA was determined by a specific restriction digest approach and by real-time PCR (RT-qPCR). Fourteen samples from M. soleus and myocardium of 12 genotyped and clinically well-characterized FHC patients were analyzed. The fraction of mutated MYH7-mRNA in five patients with mutation R723G averaged to 66 and 68% of total MYH7-mRNA in soleus and myocardium, respectively. For mutations I736T, R719W and V606M, fractions of mutated MYH7-mRNA in M. soleus were 39, 57 and 29%, respectively. For all mutations, unequal abundance was similar at the protein level. Importantly, fractions of mutated transcripts were comparable among siblings, in younger relatives and unrelated carriers of the same mutation. Hence, the extent of unequal expression of mutated versus wild-type transcript and protein is characteristic for each mutation, implying cis-acting regulatory mechanisms. Bioinformatics suggest mRNA stability or splicing effectors to be affected by certain mutations. Intriguingly, we observed a correlation between disease expression and fraction of mutated mRNA and protein. This strongly suggests that mutation-specific allelic imbalance represents a new pathogenic factor for FHC

p53 Regulates Cell Cycle and MicroRNAs to Promote Differentiation of Human Embryonic Stem Cells

Multiple studies show that tumor suppressor p53 is a barrier to dedifferentiation; whether this is strictly due to repression of proliferation remains a subject of debate. Here, we show that p53 plays an active role in promoting differentiation of human embryonic stem cells (hESCs) and opposing self-renewal by regulation of specific target genes and microRNAs. In contrast to mouse embryonic stem cells, p53 in hESCs is maintained at low levels in the nucleus, albeit in a deacetylated, inactive state. In response to retinoic acid, CBP/p300 acetylates p53 at lysine 373, which leads to dissociation from E3-ubiquitin ligases HDM2 and TRIM24. Stabilized p53 binds CDKN1A to establish a G1 phase of cell cycle without activation of cell death pathways. In parallel, p53 activates expression of miR-34a and miR-145, which in turn repress stem cell factors OCT4, KLF4, LIN28A, and SOX2 and prevent backsliding to pluripotency. Induction of p53 levels is a key step: RNA-interference-mediated knockdown of p53 delays differentiation, whereas depletion of negative regulators of p53 or ectopic expression of p53 yields spontaneous differentiation of hESCs, independently of retinoic acid. Ectopic expression of p53R175H, a mutated form of p53 that does not bind DNA or regulate transcription, failed to induce differentiation. These studies underscore the importance of a p53-regulated network in determining the human stem cell state

Strength of Screwed Connections in Crest-fixed Trapezoidal Steel Claddings

Profiled steel cladding systems used in Australia and its neighbouring countries are made of thin, high strength steel and are always crest-fixed. Past research has identified that when crest-fixed steel claddings are subjected to wind uplift/suction forces, local pull-through or dimpling failures occur prematurely at their screwed connections because of the large stress concentrations in the sheeting under the screw heads. A review of current literature and design standards demonstrated the need to improve the current design and testing methods of crest-fixed steel cladding systems under wind uplift/suction loading. Therefore detailed investigations were carried out on two-span cladding assemblies of trapezoidal profiles using laboratory experiments and finite element analyses. The finite element model was then used to study the effects of important geometry parameters on the behaviour and strength of trapezoidal steel claddings. The results were also used to develop strength formulae for optimisation and design purposes. This paper presents an overview of the experimental and numerical investigations and their important results. It includes improved non-dimensionalised design strength formulae for screwed connections in trapezoidal steel claddings