19 research outputs found
Experimental characterisation and verification of a base-isolation system including fluid viscous spring-dampers
Pseudo-dynamic tests on two buildings retrofitted with damped braces
Seismic tests have been conducted on two 3-storey buildings protected with fluid-viscous spring damper devices. One of the buildings was a reinforced concrete frame with clay elements in the slabs, while the other one was a steel frame with steel/concrete composite slabs. The spring dampers were installed through K bracing in between the floors. The tests were performed by means of the pseudodynamic method on full-size specimens and by implementing a specific compensation strategy for the strain-rate effects at the devices. The tests results allowed to compare the behaviour of the unprotected buildings with several protected configurations showing the benefits of the application of the devices and the characteristics of their behaviour
Development and application of large–scale continuous pseudo–dynamic testing techniques
Large scale high strain-rate tests of concrete
This work presents the stages of development of some innovative equipment, based on Hopkinson bar techniques, for performing large scale dynamic tests of concrete specimens. The activity is centered at the recently upgraded HOPLAB facility, which is basically a split Hopkinson bar with a total length of approximately 200 m and with bar diameters of 72 mm. Through pre-tensioning and suddenly releasing a steel cable, force pulses of up to 2 MN, 250 μs rise time and 40 ms duration can be generated and applied to the specimen tested. The dynamic compression loading has first been treated and several modifications in the basic configuration have been introduced. Twin incident and transmitter bars have been installed with strong steel plates at their ends where large specimens can be accommodated. A series of calibration and qualification tests has been conducted and the first real tests on concrete cylindrical specimens of 20cm diameter and up to 40cm length have commenced. Preliminary results from the analysis of the recorded signals indicate proper Hopkinson bar testing conditions and reliable functioning of the facility