Chemiluminescence determination of surfactant Triton X-100 in environmental water with luminol-hydrogen peroxide system

<p>Abstract</p> <p>Background</p> <p>The rapid, simple determination of surfactants in environmental samples is essential because of the extensive use and its potential as contaminants. We describe a simple, rapid chemiluminescence method for the direct determination of the non-ionic surfactant Triton X-100 (polyethylene glycol tert-octylphenyl ether) in environmental water samples. The optimized experimental conditions were selected, and the mechanism of the Luminol-H₂O₂-Triton X-100 chemiluminesence system was also studied.</p> <p>Results</p> <p>The novel chemiluminescence method for the determination of non-ionic surfactant Triton X-100 was based on the phenomenon that Triton X-100 greatly enhanced the CL signal of the luminol-H₂O₂system. The alkaline medium of luminol and the pH value obviously affected the results. Luminol concentration and hydrogen peroxide concentration also affected the results. The optimal conditions were: Na₂CO₃being the medium, pH value 12.5, luminol concentration 1.0 × 10^-4mol L^-1, H₂O₂concentration 0.4 mol L^-1. The possible mechanism was studied and proposed.</p> <p>Conclusion</p> <p>Under the optimal conditions, the standard curve was drawn up and quotas were evaluated. The linear range was 2 × 10^-4g·mL^-1-4 × 10^-2g·mL^-1(w/v), and the detection limit was 3.97 × 10^-5g·mL^-1Triton X-100 (w/v). The relative standard deviation was less than 4.73% for 2 × 10^-2g·mL^-1(w/v) Triton X-100 (n = 7). This method has been applied to the determination of Triton X-100 in environmental water samples. The desirable recovery ratio was between 96%–102% and the relative standard deviation was 2.5%–3.3%. The luminescence mechanism was also discussed in detail based on the fluorescence spectrum and the kinetic curve, and demonstrated that Triton X-100-luminol-H₂O₂was a rapid reaction.</p