The cardiac torsion as a sensitive index of heart pathology: A model study.

The torsional behaviour of the heart (i.e. the mutual rotation of the cardiac base and apex) was proved to be sensitive to alterations of some cardiovascular parameters, i.e. preload, afterload and contractility. Moreover, pathologies which affect the fibers architecture and cardiac geometry were proved to alter the cardiac torsion pattern. For these reasons, cardiac torsion represents a sensitive index of ventricular performance. The aim of this work is to provide further insight into physiological and pathological alterations of the cardiac torsion by means of computational analyses, combining a structural model of the two ventricles with simple lumped parameter models of both the systemic and the pulmonary circulations. Starting from diagnostic images, a 3D anatomy based geometry of the two ventricles was reconstructed. The myocytes orientation in the ventricles was assigned according to literature data and the myocardium was modelled as an anisotropic hyperelastic material. Both the active and the passive phases of the cardiac cycle were modelled, and different clinical conditions were simulated. The results in terms of alterations of the cardiac torsion in the presence of pathologies are in agreement with experimental literature data. The use of a computational approach allowed the investigation of the stresses and strains in the ventricular wall as well as of the global hemodynamic parameters in the presence of the considered pathologies. Furthermore, the model outcomes highlight how for specific pathological conditions, an altered torsional pattern of the ventricles can be present, encouraging the use of the ventricular torsion in the clinical practice.This is the author accepted manuscript. The final version is available from Elsevier via http://dx.doi.org/10.1016/j.jmbbm.2015.10.00

Design and 3D printing of a modular phantom of a uterus for medical device validation

PurposeThe purpose of this study is to describe the design and validation of a three-dimensional (3D)-printed phantom of a uterus to support the development of uterine balloon tamponade devices conceived to stop post-partum haemorrhages (PPHs). Design/methodology/approachThe phantom 3D model is generated by analysing the main requirements for validating uterine balloon tamponade devices. A modular approach is implemented to guarantee that the phantom allows testing these devices under multiple working conditions. Once finalised the design, the phantom effectiveness is validated experimentally. FindingsThe modular phantom allows performing the required measurements for testing the performance of devices designed to stop PPH. Social implicationsPPH is the leading obstetric cause of maternal death worldwide, mainly in low- and middle-income countries. The proposed phantom could speed up and optimise the design and validation of devices for PPH treatment, reducing the maternal mortality ratio. Originality/valueTo the best of the authors' knowledge, the 3D-printed phantom represents the first example of a modular, flexible and transparent uterus model. It can be used to validate and perform usability tests of medical devices

A Computational Tool for the Microstructure Optimization of a Polymeric Heart Valve Prosthesis.

Styrene-based block copolymers are promising materials for the development of a polymeric heart valve prosthesis (PHV), and the mechanical properties of these polymers can be tuned via the manufacturing process, orienting the cylindrical domains to achieve material anisotropy. The aim of this work is the development of a computational tool for the optimization of the material microstructure in a new PHV intended for aortic valve replacement to enhance the mechanical performance of the device. An iterative procedure was implemented to orient the cylinders along the maximum principal stress direction of the leaflet. A numerical model of the leaflet was developed, and the polymer mechanical behavior was described by a hyperelastic anisotropic constitutive law. A custom routine was implemented to align the cylinders with the maximum principal stress direction in the leaflet for each iteration. The study was focused on valve closure, since during this phase the fibrous structure of the leaflets must bear the greatest load. The optimal microstructure obtained by our procedure is characterized by mainly circumferential orientation of the cylinders within the valve leaflet. An increase in the radial strain and a decrease in the circumferential strain due to the microstructure optimization were observed. Also, a decrease in the maximum value of the strain energy density was found in the case of optimized orientation; since the strain energy density is a widely used criterion to predict elastomer's lifetime, this result suggests a possible increase of the device durability if the polymer microstructure is optimized. The present method represents a valuable tool for the design of a new anisotropic PHV, allowing the investigation of different designs, materials, and loading conditions.The authors thank the British Heart Foundation for financial support for this work under Grant NH/11/4/29059 and SP/15/5/31548

Evaluation of an aortic valve prosthesis: Fluid-structure interaction or structural simulation?

Bio-inspired polymeric heart valves (PHVs) are excellent candidates to mimic the structural and the fluid dynamic features of the native valve. PHVs can be implanted as prosthetic alternative to currently clinically used mechanical and biological valves or as potential candidate for a minimally invasive treatment, like the transcatheter aortic valve implantation. Nevertheless, PHVs are not currently used for clinical applications due to their lack of reliability. In order to investigate the main features of this new class of prostheses, pulsatile tests in an in-house pulse duplicator were carried out and reproduced in silico with both structural Finite-Element (FE) and Fluid-Structure interaction (FSI) analyses. Valve kinematics and geometric orifice area (GOA) were evaluated to compare the in vitro and the in silico tests. Numerical results showed better similarity with experiments for the FSI than for the FE simulations. The maximum difference between experimental and FSI GOA at maximum opening time was only 5%, as compared to the 46.5% between experimental and structural FE GOA. The stress distribution on the valve leaflets clearly reflected the difference in valve kinematics. Higher stress values were found in the FSI simulations with respect to those obtained in the FE simulation. This study demonstrates that FSI simulations are more appropriate than FE simulations to describe the actual behaviour of PHVs as they can replicate the valve-fluid interaction while providing realistic fluid dynamic results

Demographic Diversity and Sustainable Fisheries

Fish species are diverse. For example, some exhibit early maturation while others delay maturation, some adopt semelparous reproductive strategies while others are iteroparous, and some are long-lived and others short-lived. The diversity is likely to have profound effects on fish population dynamics, which in turn has implications for fisheries management. In this study, a simple density-dependent stage-structured population model was used to investigate the effect of life history traits on sustainable yield, population resilience, and the coefficient of variation (CV) of the adult abundance. The study showed that semelparous fish can produce very high sustainable yields, near or above 50% of the carrying capacity, whereas long-lived iteroparous fish can produce very low sustainable yields, which are often much less than 10% of the carrying capacity. The difference is not because of different levels of sustainable fishing mortality rate, but because of difference in the sensitivity of the equilibrium abundance to fishing mortality. On the other hand, the resilience of fish stocks increases from delayed maturation to early maturation strategies but remains almost unchanged from semelparous to long-lived iteroparous. The CV of the adult abundance increases with increased fishing mortality, not because more individuals are recruited into the adult stage (as previous speculated), but because the mean abundance is more sensitive to fishing mortality than its standard deviation. The magnitudes of these effects vary depending on the life history strategies of the fish species involved. It is evident that any past high yield of long-lived iteroparous fish is a transient yield level, and future commercial fisheries should focus more on fish that are short-lived (including semelparous species) with high compensatory capacity

Frontal Bone Remodeling for Gender Reassignment of the Male Forehead: A Gender-Reassignment Surgery

Gender-reassignment therapy, especially for reshaping of the forehead, can be an effective treatment to improve self-esteem. Contouring of the cranial vault, especially of the forehead, still is a rarely performed surgical procedure for gender reassignment. In addition to surgical bone remodeling, several materials have been used for remodeling and refinement of the frontal bone. But due to shortcomings of autogenous bone material and the disadvantages of polyethylene or methylmethacrylate, hydroxyapatite cement (HAC) composed of tetracalcium phosphate and dicalcium phosphate seems to be an alternative. This study aimed to analyze the clinical outcome after frontal bone remodeling with HAC for gender male-to-female reassignment. The 21 patients in the study were treated for gender reassignment of the male frontal bone using HAC. The average age of these patients was 33.4 years (range, 21–42 years). The average volume of HAC used per patient was 3.83 g. The authors’ clinical series demonstrated a satisfactory result. The surgery was easy to perform, and HAC was easy to apply and shape to suit individual needs. Overall satisfaction was very high. Therefore, HAC is a welcome alternative to the traditional use of autogenous bone graft for correction of cranial vault irregularities

Intranasal administration of acetylcholinesterase inhibitors

This short review outlines the rationale, challenges, and opportunities for intranasal acetylcholinesterases, in particular galantamine. An in vitro screening model facilitated the development of a therapeutically viable formulation. In vivo testing confirmed achievement of therapeutically relevant drug levels that matched or exceeded those for oral dosing, with a dramatic reduction in undesired emetic responses. Intranasal drug delivery is an effective option for the treatment of Alzheimer's disease and other central nervous system disorders

Culture dependent and independent analyses of 16S rRNA and ATP citrate lyase genes : a comparison of microbial communities from different black smoker chimneys on the Mid-Atlantic Ridge

Author Posting. © Springer, 2008. This is the author's version of the work. It is posted here by permission of Springer for personal use, not for redistribution. The definitive version was published in Extremophiles 12 (2008): 627-640, doi:10.1007/s00792-008-0167-5.The bacterial and archaeal communities of three deep-sea hydrothermal vent systems located on the Mid-Atlantic Ridge (MAR; Rainbow, Logatchev and Broken Spur) were investigated using an integrated culture-dependent and independent approach. Comparative molecular phylogenetic analyses, using the 16S rRNA gene and the deduced amino acid sequences of the alpha and beta subunits of the ATP citrate lyase encoding genes were carried out on natural microbial communities, on an enrichment culture obtained from the Broken Spur chimney, and on novel chemolithoautotrophic bacteria and reference strains originally isolated from several different deep-sea vents. Our data showed that the three MAR hydrothermal vent chimneys investigated in this study host very different microbial assemblages. The microbial community of the Rainbow chimney was dominated by thermophilic, autotrophic, hydrogen-oxidizing, sulfur- and nitrate reducing Epsilonproteobacteria related to the genus Caminibacter. The detection of sequences related to sulfur-reducing bacteria and archaea (Archaeoglobus) indicated that thermophilic sulfate reduction might also be occurring at this site. The Logatchev bacterial community included several sequences related to mesophilic sulfur-oxidizing bacteria, while the archaeal component of this chimney was dominated by sequences related to the ANME-2 lineage, suggesting that anaerobic oxidation of methane may be occurring at this site. Comparative analyses of the ATP citrate lyase encoding genes from natural microbial communities suggested that Epsilonproteobacteria were the dominant primary producers using the reverse TCA cycle (rTCA) at Rainbow, while Aquificales of the genera Desulfurobacterium and Persephonella were prevalent in the Broken Spur chimney.This research was supported by NSF grants MCB 04-56676 (C.V.), OCE 03-27353 (C.V.), MCB 04-56689 (S.M.S.), a grant from the New Jersey Agricultural Experiment Station to C.V., and a NIH Ph.D. Training Program in Biotechnology Fellowship (NIH NIGMS 5 T32 GM08339) to J.V. M.H. was supported through a postdoctoral scholarship from the Woods Hole Oceanographic Institution

Radiofrequency-based treatment in therapy-related clinical practice – a narrative review. Part I : acute conditions

This is an Accepted Manuscript of an article published by Taylor & Francis Group in Physical Therapy Reviews on 24 June 2015, available online at: https://www.tandfonline.com/doi/full/10.1179/1743288X15Y.0000000016Background: Radiofrequency electromagnetic field (RFEMF or simply RF)-based electrophysical agents (EPAs) have been employed in therapy-related clinical practice for several decades. They are used to reduce pain and inflammation and enhance tissue healing. Although these agents have generally become less popular in contemporary therapy practice, surveys have shown that some of these modalities are still reasonably widely used. Objective: To review the evidence for the use of non-invasive low frequency RFs (30 kHz–30 MHz) in therapy-related clinical practice. Major findings: All peer reviewed therapy-related clinical studies published in English and concerning low frequency RF were sought. Identified literature was divided into acute and chronic segments based on their clinical area and analysed to assess the volume and scope of current evidence. The studies on acute conditions were reviewed in detail for this paper. One hundred twenty clinical studies were identified, of which 30 related to acute conditions. The majority of studies employed Pulsed Shortwave Therapy (PSWT). Twenty-two studies out of 30 were related to conditions of pain and inflammation, seven to tissue healing and one to acute pneumothorax. No studies were identified on frequencies other than shortwave. Conclusions: Evidence for and against RF-based therapy is available. There is reasonable evidence in support of PSWT to alleviate postoperative pain and promote postoperative wound healing. Evidence for other acute conditions is sparse and conflicting. A general lack of research emphasis in the non-shortwave RF band is evident, with studies on acute conditions almost non-existent. Further and wider research in this area is warranted.Peer reviewe