Kinetic transcriptome analysis reveals an essentially intact induction system in a cellulase hyper-producer Trichoderma reesei strain

International audienceBackground: The filamentous fungus Trichoderma reesei is the main industrial cellulolytic enzyme producer. Several strains have been developed in the past using random mutagenesis, and despite impressive performance enhancements, the pressure for low-cost cellulases has stimulated continuous research in the field. In this context, comparative study of the lower and higher producer strains obtained through random mutagenesis using systems biology tools (genome and transcriptome sequencing) can shed light on the mechanisms of cellulase production and help identify genes linked to performance. Previously, our group published comparative genome sequencing of the lower and higher producer strains NG 14 and RUT C30. In this follow-up work, we examine how these mutations affect phenotype as regards the transcriptome and cultivation behaviour. Results: We performed kinetic transcriptome analysis of the NG 14 and RUT C30 strains of early enzyme production induced by lactose using bioreactor cultivations close to an industrial cultivation regime. RUT C30 exhibited both earlier onset of protein production (3 h) and higher steady-state productivity. A rather small number of genes compared to previous studies were regulated (568), most of them being specific to the NG 14 strain (319). Clustering analysis highlighted similar behaviour for some functional categories and allowed us to distinguish between induction-related genes and productivity-related genes. Cross-comparison of our transcriptome data with previously identified mutations revealed that most genes from our dataset have not been mutated. Interestingly, the few mutated genes belong to the same clusters, suggesting that these clusters contain genes playing a role in strain performance. Conclusions: This is the first kinetic analysis of a transcriptomic study carried out under conditions approaching industrial ones with two related strains of T. reesei showing distinctive cultivation behaviour. Our study sheds some light on some of the events occurring in these strains following induction by lactose. The fact that few regulated genes have been affected by mutagenesis suggests that the induction mechanism is essentially intact compared to that for the wild-type isolate QM6a and might be engineered for further improvement of T. reesei. Genes from two specific clusters might be potential targets for such genetic engineering

Comparative secretome analyses of two Trichoderma reesei RUT-C30 and CL847 hypersecretory strains

ABSTRACT: BACKGROUND: Due to its capacity to produce large amounts of cellulases, Trichoderma reesei is increasingly been researched in various fields of white biotechnology, especially in biofuel production from lignocellulosic biomass. The commercial enzyme mixtures produced at industrial scales are not well characterized, and their proteinaceous components are poorly identified and quantified. The development of proteomic methods has made it possible to comprehensively overview the enzymes involved in lignocellulosic biomass degradation which are secreted under various environmental conditions. RESULTS: The protein composition of the secretome produced by industrial T. reesei (strain CL847) grown on a medium promoting the production of both cellulases and hemicellulases was explored using two-dimensional electrophoresis and MALDI-TOF or LC-MS/MS protein identification. A total of 22 protein species were identified. As expected, most of them are potentially involved in biomass degradation. The 2D map obtained was then used to compare the secretomes produced by CL847 and another efficient cellulolytic T. reesei strain, Rut-C30, the reference cellulase-overproducing strain using lactose as carbon source and inducer of cellulases. CONCLUSION: This study provides the most complete mapping of the proteins secreted by T. reesei to date. We report on the first use of proteomics to compare secretome composition between two cellulase-overproducing strains Rut-C30 and CL847 grown under similar conditions. Comparison of protein patterns in both strains highlighted many unexpected differences between cellulase cocktails. The results demonstrate that 2D electrophoresis is a promising tool for studying cellulase production profiles, whether for industrial characterization of an entire secretome or for a more fundamental study on cellulase expression at genome-wide scale

Teolenn: an efficient and customizable workflow to design high-quality probes for microarray experiments

Despite the development of new high-throughput sequencing techniques, microarrays are still attractive tools to study small genome organisms, thanks to sample multiplexing and high-feature densities. However, the oligonucleotide design remains a delicate step for most users. A vast array of software is available to deal with this problem, but each program is developed with its own strategy, which makes the choice of the best solution difficult. Here we describe Teolenn, a universal probe design workflow developed with a flexible and customizable module organization allowing fixed or variable length oligonucleotide generation. In addition, our software is able to supply quality scores for each of the designed probes. In order to assess the relevance of these scores, we performed a real hybridization using a tiling array designed against the Trichoderma reesei fungus genome. We show that our scoring pipeline correlates with signal quality for 97.2% of all the designed probes, allowing for a posteriori comparisons between quality scores and signal intensities. This result is useful in discarding any bad scoring probes during the design step in order to get high-quality microarrays. Teolenn is available at http://transcriptome.ens.fr/teolenn/

Erratum to: Genome sequencing of the Trichoderma reesei QM9136 mutant identifies a truncation of the transcriptional regulator XYR1 as the cause for its cellulase-negative phenotype

International audienceBackground : Trichoderma reesei is the main industrial source of cellulases and hemicellulases required for the hydrolysis of biomass to simple sugars, which can then be used in the production of biofuels and biorefineries. The highly productive strains in use today were generated by classical mutagenesis. As byproducts of this procedure, mutants were generated that turned out to be unable to produce cellulases. In order to identify the mutations responsible for this inability, we sequenced the genome of one of these strains, QM9136, and compared it to that of its progenitor T. reesei QM6a.Results : In QM9136, we detected a surprisingly low number of mutagenic events in the promoter and coding regions of genes, i.e. only eight indels and six single nucleotide variants. One of these indels led to a frame-shift in the Zn2Cys6 transcription factor XYR1, the general regulator of cellulase and xylanase expression, and resulted in its C-terminal truncation by 140 amino acids. Retransformation of strain QM9136 with the wild-type xyr1 allele fully recovered the ability to produce cellulases, and is thus the reason for the cellulase-negative phenotype. Introduction of an engineered xyr1 allele containing the truncating point mutation into the moderate producer T. reesei QM9414 rendered this strain also cellulase-negative. The correspondingly truncated XYR1 protein was still able to enter the nucleus, but failed to be expressed over the basal constitutive level.Conclusion : The missing 140 C-terminal amino acids of XYR1 are therefore responsible for its previously observed auto-regulation which is essential for cellulases to be expressed. Our data present a working example of the use of genome sequencing leading to a functional explanation of the QM9136 cellulase-negative phenotype

The CRE1 carbon catabolite repressor of the fungus Trichoderma reesei: a master regulator of carbon assimilation

<p>Abstract</p> <p>Background</p> <p>The identification and characterization of the transcriptional regulatory networks governing the physiology and adaptation of microbial cells is a key step in understanding their behaviour. One such wide-domain regulatory circuit, essential to all cells, is carbon catabolite repression (CCR): it allows the cell to prefer some carbon sources, whose assimilation is of high nutritional value, over less profitable ones. In lower multicellular fungi, the C2H2 zinc finger CreA/CRE1 protein has been shown to act as the transcriptional repressor in this process. However, the complete list of its gene targets is not known.</p> <p>Results</p> <p>Here, we deciphered the CRE1 regulatory range in the model cellulose and hemicellulose-degrading fungus <it>Trichoderma reesei </it>(anamorph of <it>Hypocrea jecorina</it>) by profiling transcription in a wild-type and a delta-<it>cre1 </it>mutant strain on glucose at constant growth rates known to repress and de-repress CCR-affected genes. Analysis of genome-wide microarrays reveals 2.8% of transcripts whose expression was regulated in at least one of the four experimental conditions: 47.3% of which were repressed by CRE1, whereas 29.0% were actually induced by CRE1, and 17.2% only affected by the growth rate but CRE1 independent. Among CRE1 repressed transcripts, genes encoding unknown proteins and transport proteins were overrepresented. In addition, we found CRE1-repression of nitrogenous substances uptake, components of chromatin remodeling and the transcriptional mediator complex, as well as developmental processes.</p> <p>Conclusions</p> <p>Our study provides the first global insight into the molecular physiological response of a multicellular fungus to carbon catabolite regulation and identifies several not yet known targets in a growth-controlled environment.</p

Localisation des ARNm codant pour des protéines mitochondriales chez la levure Saccharomyces cerevisiae

PARIS7-Bibliothèque centrale (751132105) / SudocSudocFranceF

Optimization of flow cytometry parameters for high-throughput screening of spores of the filamentous fungus Trichoderma reesei

International audienceFlow cytometry (FCM) is a powerful technique still little used to study filamentous fungi due to physical constraints: the hyphae are too large to enter the FCM fluidic system, unless spores can be analyzed at a very early stage of germination. The technique nevertheless has strong potential for the study of these micro-organisms (spore sorting, viability, characterization etc.). This study focused on the investigation of several parameters, ranging from germination and storage conditions of T. reesei spores through to FCM gating, to detect their fluorescence during the first 24 h of germination. Fluorescent spores were first obtained after aerobic germination at 25 °C and monitored over 24 h using FCM, to screen for nine promoters controlling a green fluorescent protein gene. The fluorescence signal (FL1) was then acquired, in addition to the growth characterization of the spores, based on the size signal or Forward Scatter (FSC). They were combined to identify the best candidate(s) from among the nine promoters for the strongest- and earliest-possible fluorescence emission, which resulted in the following ranking: pTEF > pPKI > pGPD > pPDC. There are numerous possible applications of this work, ranging from molecular biology to monitoring fermentation

From fungal secretomes to enzymes cocktails: The path forward to bioeconomy

International audienceBioeconomy is seen as a way to mitigate the carbon footprint of human activities by reducing at least part of the fossil resources-based economy. In this new paradigm of sustainable development, the use of enzymes as biocatalysts will play an increasing role to provide services and goods. In industry, most of multicomponent enzyme cocktails are of fungal origin. Filamentous fungi secrete complex enzyme sets called “secretomes” that can be utilized as enzyme cocktails to valorize different types of bioresources. In this review, we highlight recent advances in the study of fungal secretomes using improved computational and experimental secretomics methods, the progress in the understanding of industrially important fungi, and the discovery of new enzymatic mechanisms and interplays to degrade renewable resources rich in polysaccharides (e.g. cellulose). We review current biotechnological applications focusing on the benefits and challenges of fungal secretomes for industrial applications with some examples of commercial cocktails of fungal origin containing carbohydrate-active enzymes (CAZymes) and we discuss future trends

New improvements for lignocellulosic ethanol

The use of lignocellulosic biomass for the production of biofuels will be unavoidable if liquid fossil fuels are to be replaced by renewable and sustainable alternatives. Ethanol accounts for the majority of biofuel use worldwide, and the prospect of its biological production from abundant lignocellulosic feedstocks is attractive. The recalcitrance of these raw materials still renders proposed processes complex and costly, but there are grounds for optimism. The application of new, engineered enzyme systems for cellulose hydrolysis, the construction of inhibitor-tolerant pentose-fermenting industrial yeast strains, combined with optimized process integration promise significant improvements. The opportunity to test these advances in pilot plants paves the way for large-scale units. This review summarizes recent progress in this field, including the validation at pilot scale, and the economic and environmental impacts of this production pathway