Residual stress characterization of single and triple-pass autogenously welded stainless steel pipes

Using neutron diffraction the components of the residual stress field have been determined in the region near a mid-length groove in two identical austenitic stainless pipes in which weld beads had been laid down. One pipe sample had a single pass, and the second a triple pass, autogenous weld deposited around the groove circumference. The results show the effect on the stress field of the additional weld deposited and are compared to the results of Finite Element Modelling. The hoop stress component is found to be generally tensile, and greater in the triple pass weldment than in the single pass weldment. The hoop stresses reach peak values of around 400 MPa in tension. X-ray measurements of the residual stress components on the near inner surface of the pipe weldments are also presented, and show tensile stresses in both pipes, with a higher magnitude in the three-pass weldment

Crystal Field, Magnetic Anisotropy and Excitations in Rare-Earth Hexaborides

We clarify the role of crystalline electric field (CEF) induced magnetic anisotropy in the ground state and spin-wave spectrum of cubic rare-earth materials with dominating isotropic magnetic exchange interactions. In particular we study the hexaboride NdB_6 which is shown to exhibit strong spin-quadrupolar coupling. The CEF scheme is analyzed and a non-collinear magnetization response is found. The spin orientation in the antiferromagnetically ordered ground-state is identified. Moreover, the spin excitations are evaluated and in agreement with inelastic neutron scattering a suppression of one of the two magnetic modes in the strong-coupling regime is predicted.Comment: 4 pages, 1 eps-figur

The high temperature expansion of the classical XYZXYZ chain

We present the $\beta$-expansion of the Helmholtz free energy of the classical $XYZ$ model, with a single-ion anisotropy term and in the presence of an external magnetic field, up to order $\beta^{12}$. We compare our results to the numerical solution of Joyce's [Phys. Rev. Lett. 19, 581 (1967)] expression for the thermodynamics of the $XXZ$ classical model, with neither single-ion anisotropy term nor external magnetic field. This comparison shows that the derived analytical expansion is valid for intermediate temperatures such as $kT/J_x \approx 0.5$. We show that the specific heat and magnetic susceptibility of the spin-2 antiferromagnetic chain can be approximated by their respective classical results, up to $kT/J \approx 0.8$, within an error of 2.5%. In the absence of an external magnetic field, the ferromagnetic and antiferromagnetic chains have the same classical Helmholtz free energy. We show how this two types of media react to the presence of an external magnetic field

Theoretical analysis of neutron scattering results for quasi-two dimensional ferromagnets

A theoretical study has been carried out to analyse the available results from the inelastic neutron scattering experiment performed on a quasi-two dimensional spin-1/2 ferromagnetic material $K_2CuF_4$. Our formalism is based on a conventional semi-classical like treatment involving a model of an ideal gas of vortices/anti-vortices corresponding to an anisotropic XY Heisenberg ferromagnet on a square lattice. The results for dynamical structure functions for our model corresponding to spin-1/2, show occurrence of negative values in a large range of energy transfer even encompassing the experimental range, when convoluted with a realistic spectral window function. This result indicates failure of the conventional theoretical framework to be applicable to the experimental situation corresponding to low spin systems. A full quantum formalism seems essential for treating such systems.Comment: 16 pages, 6 figures, 1 Table Submitted for publicatio

Neutron diffraction residual stress measurements on girth-welded 304 stainless steel pipes with weld metal deposited up to half and full pipe wall thickness

The residual stress distribution has been measured in two girth-welded austenitic stainless steel pipe weldments using time-of-flight neutron diffraction. One had weld filler metal deposited up to half the pipe wall thickness, and one had weld metal deposited up to full pipe wall thickness. The aim of the work is to evaluate the evolution in residual stress profile on filling the weld, on which there is little experimental data, and where the selection of the correct hardening model used in finite element modelling can benefit greatly from an understanding of the intermediate residual stresses partway through the welding operation. The measured residual stresses are compared with those calculated by finite element modelling and measured using X-ray diffraction. The results show a change in the measured hoop stress at the weld toe from tension to compression between the half-and fully-filled weld. The finite element results show an overprediction of the residual stress, which may be a consequence of the simple isotropic hardening model applied. The results have implications for the likely occurrence of stress corrosion cracking in this important type of pipe-to-pipe weldment

Orbital Ordering in Paramagnetic LaMnO3 and KCuF3

{\it Ab-initio} studies of the stability of orbital ordering, its coupling to magnetic structure and its possible origins (electron-phonon and/or electron-electron interactions) are reported for two perovskite systems, LaMnO$_3$ and KCuF$_3$. We present a new Average Spin State (ASS) calculational scheme that allowed us to treat a paramagnetic state. Using this scheme, we succesfully described the experimental magnetic/orbital phase diagram of both LaMnO$_3$ and KCuF$_3$ in crystal structures when the Jahn-Teller distortions are neglected. Hence, we conclude that the orbital ordering in both compounds is purely electronic in origin.Comment: 10 pages, 5 figure

Ordering in the dilute weakly-anisotropic antiferromagnet Mn(0.35)Zn(0.65)F2

The highly diluted antiferromagnet Mn(0.35)Zn(0.65)F2 has been investigated by neutron scattering in zero field. The Bragg peaks observed below the Neel temperature TN (approximately 10.9 K) indicate stable antiferromagnetic long-range ordering at low temperature. The critical behavior is governed by random-exchange Ising model critical exponents (nu approximately 0.69 and gamma approximately 1.31), as reported for Mn(x)Zn(1-x)F2 with higher x and for the isostructural compound Fe(x)Zn(1-x)F2. However, in addition to the Bragg peaks, unusual scattering behavior appears for |q|>0 below a glassy temperature Tg approximately 7.0 K. The glassy region T<Tg corresponds to that of noticeable frequency dependence in earlier zero-field ac susceptibility measurements on this sample. These results indicate that long-range order coexists with short-range nonequilibrium clusters in this highly diluted magnet.Comment: 7 pages, 5 figure

Magnetization steps in a diluted Heisenberg antiferromagnetic chain: Theory and experiments on TMMC:Cd

A theory for the equilibrium low-temperature magnetization M of a diluted Heisenberg antiferromagnetic chain is presented. The magnetization curve, M versus B, is calculated using the exact contributions of finite chains with 1 to 5 spins, and the "rise and ramp approximation" for longer chains. Some non-equilibrium effects that occur in a rapidly changing B, are also considered. Specific non-equilibrium models based on earlier treatments of the phonon bottleneck, and of spin flips associated with cross relaxation and with level crossings, are discussed. Magnetization data on powders of TMMC diluted with cadmium [i.e., (CH_3)_4NMn_xCd_(1-x)Cl_3, with 0.16<=x<=0.50 were measured at 0.55 K in 18 T superconducting magnets. The field B_1 at the first MST from pairs is used to determine the NN exchange constant, J, which changes from -5.9 K to -6.5 K as x increases from 0.16 to 0.50. The magnetization curves obtained in the superconducting magnets are compared with simulations based on the equilibrium theory. Data for the differential susceptibility, dM/dB, were taken in pulsed magnetic fields (7.4 ms duration) up to 50 T, with the powder samples in a 1.5 K liquid-helium bath. Non-equilibrium effects, which became more severe as x decreased, were observed. The non-equilibrium effects are tentatively interpreted using the "Inadequate Heat Flow Scenario," or to cross-relaxation, and crossings of energy levels, including those of excited states.Comment: 16 pages, 14 figure

Dynamic structure factor of the Ising model with purely relaxational dynamics

We compute the dynamic structure factor for the Ising model with a purely relaxational dynamics (model A). We perform a perturbative calculation in the $\epsilon$ expansion, at two loops in the high-temperature phase and at one loop in the temperature magnetic-field plane, and a Monte Carlo simulation in the high-temperature phase. We find that the dynamic structure factor is very well approximated by its mean-field Gaussian form up to moderately large values of the frequency $\omega$ and momentum $k$. In the region we can investigate, $k\xi \lesssim 5$, $\omega \tau \lesssim 10$, where $\xi$ is the correlation length and $\tau$ the zero-momentum autocorrelation time, deviations are at most of a few percent.Comment: 21 pages, 3 figure

Through-Thickness Residual Stress Profiles in Austenitic Stainless Steel Welds: A Combined Experimental and Prediction Study

Economic and safe management of nuclear plant components relies on accurate prediction of welding-induced residual stresses. In this study, the distribution of residual stress through the thickness of austenitic stainless steel welds has been measured using neutron diffraction and the contour method. The measured data are used to validate residual stress profiles predicted by an artificial neural network approach (ANN) as a function of welding heat input and geometry. Maximum tensile stresses with magnitude close to the yield strength of the material were observed near the weld cap in both axial and hoop direction of the welds. Significant scatter of more than 200 MPa was found within the residual stress measurements at the weld center line and are associated with the geometry and welding conditions of individual weld passes. The ANN prediction is developed in an attempt to effectively quantify this phenomenon of ‘innate scatter’ and to learn the non-linear patterns in the weld residual stress profiles. Furthermore, the efficacy of the ANN method for defining through-thickness residual stress profiles in welds for application in structural integrity assessments is evaluated