Developing a facility for glass façade performance testing

This research aims to investigate whether real spaces can support legitimate measurements on glazing energy and thermal comfort analysis. This paper presents the development of a research facility for doing this. It will test simple to complex glazing and shading systems in a real (occupied) interior office environment. The purpose of this research project is to compare measured results with those being simulated with existing software and to discover discrepancies between simulation and real measured results. What parameters characterize a glazing system, whether simple or complex? Can these parameters be used to predict the energy transfer and comfort in the space? One must begin with simple glazing systems and verify measured with readily known simulated results. It is, at present, very difficult to use geometric based software with thermal based software to predict the performance of complex glazing systems. However, if we can characterize glazing systems with a set of reliable measurements, we can provide the data necessary for predicting performance in a live space. Specifically, the Solar Heat Gain Coefficient (SHGC) is a variable parameter based upon solar incident angle to a glazing system and is intended to be measured in its integral components: solar transmittance and inward-flowing fraction (radiative/convective) heat gain. A new instrumental approach through variable surface coated heat flux meters is being investigated to provide the measurement of interior glazing surface radiative and convective heat gain. The results suggest that this instrumentation may support be a viable method of testing inward-flowing heat gains from the interior glass surface. The test set-up also considers the application of a well-known B&K 1221 Comfort Meter for determining thermal comfort responses in the ‘perimeter zone’ on the interior side of a façade. This work requires further investigation, but is intended to be used in conjunction with solar pyranometers measuring transmittance as well as the heat flux meter and surface temperature instrumentation

A simple-to-use calculator for determining the total solar heat gain of a glazing system

Architects and designers could readily use a quick and easy tool to determine the solar heat gains of their selected glazing systems for particular orientations, tilts and climate data. Speedy results under variable solar angles and degree of irradiance would be welcomed by most. Furthermore, a newly proposed program should utilise the outputs of existing glazing tools and their standard information, such as the use of U-values and Solar Heat Gain Coefficients (SHGC’s) as generated for numerous glazing configurations by the well-known program WINDOW 6.0 (LBNL, 2001). The results of this tool provide interior glass surface temperature and transmitted solar radiation which link into comfort analysis inputs required by the ASHRAE Thermal Comfort Tool –V2 (ASHRAE, 2011). This tool is a simple-to-use calculator providing the total solar heat gain of a glazing system exposed to various angles of solar incidence. Given basic climate (solar) data, as well as the orientation of the glazing under consideration the solar heat gain can be calculated. The calculation incorporates the Solar Heat Gain Coefficient function produced for the glazing system under various angles of solar incidence WINDOW 6.0 (LBNL, 2001). The significance of this work rests in providing an orientation-based heat transfer calculator through an easy-to-use tool (using Microsoft EXCEL) for user inputs of climate and Solar Heat Gain Coefficient (WINDOW-6) data. We address the factors to be considered such as solar position and the incident angles to the horizontal and the window surface, and the fact that the solar heat gain coefficient is a function of the angle of incidence. We also discuss the effect of the diffuse components of radiation from the sky and those from ground surface reflection, which require refinement of the calculation methods. The calculator is implemented in an Excel workbook allowing the user to input a dataset and immediately produce the resulting solar gain. We compare this calculated total solar heat gain with measurements from a test facility described elsewhere in this conference (Luther et.al., 2012)