Chicken meat and bone meal valorization by hydrothermal treatment and anaerobic digestion: Biofuel production and nutrient recovery

In this work, chicken meat and bones (C-MBM) waste is treated through a sequence of stages including hydrothermal treatment (HTT), nutrient recovery and anaerobic digestion, with the aim of evaluating their potential synergy as a circular economy approach. HTT was carried out at 170, 200 and 230 ◦C, under non-acidic and acidic conditions using 0.5 M HCl (HTT-A). Phosphorous from process water was recovered by chemical precipitation with the addition of a Mg salt, and the liquid effluent was anaerobically treated to degrade organic matter and produce a methane-rich biogas. Hydrochar obtained under non-acidic conditions presented poor combustion characteristics, while HTT-A yielded a bio-oil with high higher heating value (≈38 MJ/kg), good combustibility performance and high reactivity. More than 95% phosphorous (as phosphate) and almost 100% nitrogen (being 30% as NH4–N) content in C-MBM were solubilized in the process water upon HTT-A, while these nutrients were mainly retained in the hydrochar in non-acidic reactions. Chemical precipitation of P and NH4–N from HTT-A process water allowed recovering a crystalline solid identified as struvite and a struvite-apatite mixture, with negligible heavy metals content. High methane production (250–300 mL CH4/g CODadded) and organic matter removal (up to 75%) were achieved in the anaerobic tests. HTT proves to be a suitable treatment for material and energetic valorization of C-MBM, within a circular economy framework, which allows to obtain high value-added products (hydrochar/bio-oil, biofertilizers and biogas)Authors greatly appreciate funding from Spain’s MINECO (PID2019- 108445RB-I00, PDC2021-120755-I00), Madrid Regional Government (Project S2018/EMT-4344) and Grupo Kerbest Company. A. Sarrion wishes to thank the Spanish MICINN and ESF for a research grant (BES2017-081515). R.P. Ipiales acknowledges financial support from Community of Madrid (IND2019/AMB-17092) and Arquimea-Agrotech Compan

Influence of COVID-19 confinement in students’ performance in higher education

Documento procedente de EdArXiv Preprints , se deposita en Biblos-e Archivo versión 2 de 7 Mayo de 2020This study explores the effects of COVID-19 confinement in the students’ performance in higher education. Using a field experiment of 458 students from three different subjects in Universidad Autónoma de Madrid (Spain), we study the differences in assessments by dividing students into two groups. The first group (control) corresponds to academic years 2017/2018 and 2018/2019. The second group (experimental) corresponds to students from 2019/2020, which is the group of students that interrupted their face-to-face activities because of the confinement. The results show that there is a significant positive effect of the COVID-19 confinement on students’ performance. This effect is also significative in activities that did not change their format when performed after the confinement. We find that this effect is significative both in subjects that increased the number of assessment activities and subjects that did not change the workload of students. Additionally, an analysis of students’ learning strategies before confinement shows that students did not study on a continuous basis. Based on these results, we conclude that COVID-19 confinement changed students’ learning strategies to a more continuous habit, improving their efficiency. For these reasons, better scores in students’ assessment are expected due to COVID-19 confinement that can be explained by an improvement in their learning performanceThis work has been financed by the project Erasmus+ 2017-1-ES01-KA203-038266 Project of the European Union: “Advanced Design of e-Learning Applications Personalizing Teaching to Improve Virtual Education

Dielectric behaviour of Hf-doped CaCu₃Ti₄O₁₂ ceramics obtained by conventional synthesis and reactive sintering

CaCu₃ (Ti₄₋ₓ Hfₓ )O₁₂ ceramics ( x  = 0.04, 0.1 and 0.2) were prepared by conventional synthesis (CS) and through reactive sintering (RS), in which synthesis and sintering of the material take place in one single step. The microstructure and the dielectric properties of Hf-doped CCTO (CCTOHf) have been studied by XRD, FE-SEM, AFM, Raman and impedance spectroscopy (IS) in order to correlate the structure, microstructure and the electrical properties. Samples prepared by reactive sintering show slightly higher dielectric constant than those prepared by conventional synthesis in the same way than the pure CCTO. Dielectric constant and dielectric losses decrease slightly increasing Hf content. For CCTOHf ceramics with x  > 0.04 for CS and x  > 0.1 for RS, a secondary phase HfTiO₄ appears. As expected, the reactive sintering processing method allows a higher incorporation of Hf in the CCTO lattice than the conventional synthesis one.Facultad de Ciencias Exacta

Perturbed angular correlation study of Ta-181-doped PbTi1-xHfxO3 compounds

In this work, the hyperfine quadrupole interaction at Ta-doped PbTi1-xHfxO3 polycrystalline samples is studied for the first time. Powders with x=0.25, 0.50 and 0.75 were prepared and characterized by X-ray diffraction analysis. Perturbed Angular Correlation (PAC) analyses were done as a function of temperature, using low concentration Ta-181 nuclei as probes. In the ferroelectric and paraelectric phases of these compounds two sites were occupied by the probes. For each site the quadrupole frequency, asymmetry and relative distribution width parameters were obtained as a function of temperature above and below the Curie temperature (T-C). One of these sites was assigned to the regular Ti-Hf site, while the other one was assigned to some kind of defect. The behavior of the hyperfine parameters as a function of temperature was analyzed in terms of a recent published phase diagram and the presence of disorder below and above T-C. For the three compositions measured, the obtained hyperfine parameters present discontinuities which correspond to the ferroelectric-paraelectric phase transition. In both phases it was found broad frequency distributed interactions. The disorder in the electronic distribution would be responsible for the broad line width of the hyperfine interaction. (C) 2012 Elsevier B.V. All rights reserved

Dielectric behaviour of Hf-doped CaCu₃Ti₄O₁₂ ceramics obtained by conventional synthesis and reactive sintering

CaCu₃ (Ti₄₋ₓ Hfₓ )O₁₂ ceramics ( x  = 0.04, 0.1 and 0.2) were prepared by conventional synthesis (CS) and through reactive sintering (RS), in which synthesis and sintering of the material take place in one single step. The microstructure and the dielectric properties of Hf-doped CCTO (CCTOHf) have been studied by XRD, FE-SEM, AFM, Raman and impedance spectroscopy (IS) in order to correlate the structure, microstructure and the electrical properties. Samples prepared by reactive sintering show slightly higher dielectric constant than those prepared by conventional synthesis in the same way than the pure CCTO. Dielectric constant and dielectric losses decrease slightly increasing Hf content. For CCTOHf ceramics with x  > 0.04 for CS and x  > 0.1 for RS, a secondary phase HfTiO₄ appears. As expected, the reactive sintering processing method allows a higher incorporation of Hf in the CCTO lattice than the conventional synthesis one.Facultad de Ciencias Exacta

Experimental determination of the eutectic temperature in air of the CuO-TiO2 pseudobinary system

Eutectic temperature and composition in the CuO–TiO2 pseudobinary system have been experimentally determined in air by means differential thermal analysis (DTA), thermogravimetry (TG) and hot-stage microscopy (HSM). Samples of the new eutectic composition treated at different temperatures have been characterized by X-ray diffraction (XRD) and X-ray absorption near-edge structural spectroscopy (XANES) to identify phases and to determine the Cu valence state, respectively. The results show that the eutectic temperature in air is higher by 100 °C (∼1000 °C) for a Ti-richer composition (XTiO2=25 mol%) than the one calculated in the literature. The reduction of Cu2+ to Cu+ takes places at about 1030 °C. The existence of Cu2TiO3 and Cu3TiO4 has been confirmed by XRD in the temperature range between 1045 and 1200 °C

Highly conductive coatings of carbon black/silica composites obtained by a sol-gel process

Conductive submicronic coatings of carbon black (CB)/silica composites have been prepared by a sol-gel process and deposited by spray-coating on glazed porcelain tiles. Stable CB dispersions with surfactant were rheologically characterized to determine the optimum CB-surfactant ratio. The composites were analyzed by Differential Thermal and Thermogravimetric Analysis and Hg-Porosimetry. Thin coatings were thermally treated in the temperature range of 300-500degC in air atmosphere. The microstructure of the coatings was determined by scanning electron microscopy and the structure evaluated by confocal Raman spectroscopy. The electrical characterization of the samples was carried out using dc intensity-voltage curves. The coatings exhibit good adhesion, high density and homogeneous distribution of the conductive filler (CB) in the insulate matrix (silica) that protects against the thermal degradation of the CB nanoparticles during the sintering process. As consequence, the composite coatings show the lowest resistivity values for CB-based films reported in the literature, with values of ~7times10 -5Omegam

Depth of Response in Multiple Myeloma: A Pooled Analysis of Three PETHEMA/GEM Clinical Trials

Purpose To perform a critical analysis on the impact of depth of response in newly diagnosed multiple myeloma (MM). Patients and Methods Data were analyzed from 609 patients who were enrolled in the GEM (Grupo Español de Mieloma) 2000 and GEM2005MENOS65 studies for transplant-eligible MM and the GEM2010MAS65 clinical trial for elderly patients with MM who had minimal residual disease (MRD) assessments 9 months after study enrollment. Median follow-up of the series was 71 months. Results Achievement of complete remission (CR) in the absence of MRD negativity was not associated with prolonged progression-free survival (PFS) and overall survival (OS) compared with near-CR or partial response (median PFS, 27, 27, and 29 months, respectively; median OS, 59, 64, and 65 months, respectively). MRD-negative status was strongly associated with prolonged PFS (median, 63 months; P , .001) and OS (median not reached; P , .001) overall and in subgroups defined by prior transplantation, disease stage, and cytogenetics, with prognostic superiority of MRD negativity versus CR particularly evident in patients with high-risk cytogenetics. Accordingly, Harrell C statistics showed higher discrimination for both PFS and OS in Cox models that included MRD (as opposed to CR) for response assessment. Superior MRD-negative rates after different induction regimens anticipated prolonged PFS. Among 34 MRD-negative patients withMMand a phenotypic pattern of bone marrow involvement similar to monoclonal gammopathy of undetermined significance at diagnosis, the probability of “operational cure” was high; median PFS was 12 years, and the 10-year OS rate was 94%. Conclusion Our results demonstrate that MRD-negative status surpasses the prognostic value of CR achievement for PFS and OS across the disease spectrum, regardless of the type of treatment or patient risk group. MRD negativity should be considered as one of the most relevant end points for transplant-eligible and elderly fit patients with MM

Prognostic value of antigen expression in multiple myeloma: a PETHEMA/GEM study on 1,265 patients enrolled in four consecutive clinical trials

Persistence of minimal residual disease (MRD) after treatment for myeloma predicts inferior outcomes, but within MRD-positive patients there is great heterogeneity with both early and very late relapses. Among different MRD techniques, flow cytometry provides additional information about antigen expression on tumor cells, which could potentially contribute to stratify MRD-positive patients. We investigated the prognostic value of those antigens required to monitor MRD in 1265 newly diagnosed patients enrolled in the GEM2000, GEM2005MENOS65, GEM2005MAS65 and GEM2010MAS65 protocols. Overall, CD19pos, CD27neg, CD38lo, CD45pos, CD81pos, CD117neg and CD138lo expression predicted inferior outcomes. Through principal component analysis, we found that simultaneous CD38lowCD81posCD117neg expression emerged as the most powerful combination with independent prognostic value for progression-free survival (HR:1.69; P=0.002). This unique phenotypic profile retained prognostic value among MRD-positive patients. We then used next-generation flow to determine antigen stability throughout the course of the disease, and found that the expression of antigens required to monitor MRD is mostly stable from diagnosis to MRD stages, except for CD81 whose expression progressively increased from baseline to chemoresistant tumor cells (14 vs 28%). Altogether, we showed that the phenotypic profile of tumor cells provides additional prognostic information, and could be used to further predict risk of relapse among MRD-positive patients