39 research outputs found
A Trapped Field of 17.6 T in Melt-Processed, Bulk Gd-Ba-Cu-O Reinforced with Shrink-Fit Steel
The ability of large grain, REBaCuO [(RE)BCO; RE =
rare earth] bulk superconductors to trap magnetic field is determined by their
critical current. With high trapped fields, however, bulk samples are subject
to a relatively large Lorentz force, and their performance is limited primarily
by their tensile strength. Consequently, sample reinforcement is the key to
performance improvement in these technologically important materials. In this
work, we report a trapped field of 17.6 T, the largest reported to date, in a
stack of two, silver-doped GdBCO superconducting bulk samples, each of diameter
25 mm, fabricated by top-seeded melt growth (TSMG) and reinforced with
shrink-fit stainless steel. This sample preparation technique has the advantage
of being relatively straightforward and inexpensive to implement and offers the
prospect of easy access to portable, high magnetic fields without any
requirement for a sustaining current source.Comment: Updated submission to reflect licence change to CC-BY. This is the
"author accepted manuscript" and is identical in content to the published
versio
A trapped field of 17.6 T in melt-processed, bulk Gd-Ba-Cu-O reinforced with shrink-fit steel
The ability of large grain, REBaCuO [(RE)BCO; RE =
rare earth] bulk superconductors to trap magnetic field is determined by their
critical current. With high trapped fields, however, bulk samples are subject
to a relatively large Lorentz force, and their performance is limited primarily
by their tensile strength. Consequently, sample reinforcement is the key to
performance improvement in these technologically important materials. In this
work, we report a trapped field of 17.6 T, the largest reported to date, in a
stack of two, silver-doped GdBCO superconducting bulk samples, each of diameter
25 mm, fabricated by top-seeded melt growth (TSMG) and reinforced with
shrink-fit stainless steel. This sample preparation technique has the advantage
of being relatively straightforward and inexpensive to implement and offers the
prospect of easy access to portable, high magnetic fields without any
requirement for a sustaining current source.The ability of large-grain (RE)Ba2Cu3O7−δ ((RE)BCO; RE = rare earth) bulk superconductors to trap magnetic fields is determined by their critical current. With high trapped fields, however, bulk samples are subject to a relatively large Lorentz force, and their performance is limited primarily by their tensile strength. Consequently, sample reinforcement is the key to performance improvement in these technologically important materials. In this work, we report a trapped field of 17.6 T, the largest reported to date, in a stack of two silver-doped GdBCO superconducting bulk samples, each 25 mm in diameter, fabricated by top-seeded melt growth and reinforced with shrink-fit stainless steel. This sample preparation technique has the advantage of being relatively straightforward and inexpensive to implement, and offers the prospect of easy access to portable, high magnetic fields without any requirement for a sustaining current source.This is the final published version, distributed under a Creative Commons Attribution License. This can also be found on the publisher's website at: http://iopscience.iop.org/0953-2048/27/8/08200
Evidence of Doping-Dependent Pairing Symmetry in Cuprate Superconductors
Scanning tunneling spectroscopy (STS) studies reveal long-range spatial
homogeneity and predominantly -pairing spectral characteristics in
under- and optimally doped superconductors, whereas
STS on exhibits {\it
microscopic} spatial modulations and strong scattering near the Zn or Mg
impurity sites, together with global suppression of the pairing potential. In
contrast, in overdoped ,
-pairing symmetry is found, suggesting significant changes in
the superconducting ground-state at a critical doping value.Comment: 4 pages, 4 figures. Published in Physical Review Letters.
Corresponding author: Nai-Chang Yeh (e-mail address: [email protected]
Design, Fabrication, and Test of a 5-kWh/100-kW Flywheel Energy Storage Utilizing a High-Temperature Superconducting Bearing
Recommended from our members
Design, Fabrication, and Test of a 5-kWh/100-kW Flywheel Energy Storage Utilizing a High-Temperature Superconducting Bearing
The summaries of this project are: (1) Program goal is to design, develop, and demonstrate a 100 kW UPS flywheel electricity system; (2) flywheel system spin tested up to 15,000 RPM in a sensorless, closed loop mode; (3) testing identified a manufacturing deficiency in the motor stator--overheats at high speed, limiting maximum power capability; (4) successfully spin tested direct cooled HTS bearing up to 14,500 RPM (limited by Eddy current clutch set-up); (5) Testing confirmed commercial feasibility of this bearing design--Eddy Current losses are within acceptable limits; and (6) Boeing's investment in flywheel test facilities increased the spin-test capabilities to one of the highest in the nation