Analysis of melt-textured YBCO with nanoscale inclusions

Recently, particles with the chemical composition Y2Ba 4CuMOx where M U, Nb, Zr, etc., and sizes in the range of 50 - 200 nm have been generated within the YBCO matrix of bulk, melt-processed superconductors in order to serve as effective flux pinning sites. By means of AFM and electron backscatter diffraction (EBSD) measurements, we analyse the spatial distribution and the size distribution of these nanoparticles within the superconducting YBCO matrix

Investigation of grain orientations of melt-textured HTSC with addition of uranium oxide, Y2O3 and Y2BaCuO5

Local grain orientations were studied in melt-textured YBCO samples processed with various amounts of depleted uranuim oxide (DU) and Y 2O3 by means of electron backscatter diffraction (EBSD) analysis. The addition of DU leads to the formation of Ucontaining nanoparticles (Y2Ba4CuUOx) with sizes of around 200 nm, embedded in the superconducting Y-123 matrix. The orientation of the Y 2BaCuO5 (Y-211) particles, which are also present in the YBCO bulk microstructure, is generally random as is the case in other melttextured Y-123 samples. The presence of Y-211 particles, however, also affects the orientation of the Y-123 matrix in these samples

EBSD characterisation of Y2Ba4CuUOx phase in melttextured YBCO with addition of depleted uranium oxide

Melt-textured YBCO samples processed with added Y2O3 and depleted uranium oxide (DU) contain nano-particles, which have been identified previously as Y2Ba4CuUOx (U-411). This phase has a cubic unit cell, which is clearly distinct from the orthorhombic Y-123 and Y-211 phases within the YBCO system. In samples with a high amount of DU addition (0.8 wt-% DU), U-2411 particles have sizes between 200 nm and several νm, so identification of the Kikuchi patterns of this phase becomes possible. Together with a parallel EDX analysis, the particles embedded in the Y-123 matrix can be identified unambiguously. In this way, a three-phase EBSD scan becomes possible, allowing also the identification of nanometre-sized particles in the sample microstructure

Characterization of nano-composite M-2411/Y-123 thin films by electron backscatter diffraction and in-field critical current measurements

Thin films of nano-composite Y-Ba-Cu-O (YBCO) superconductors containing nano-sized, non-superconducting particles of Y2Ba 4CuMOx (M-2411 with M = Ag and Nb) have been prepared by the PLD technique. Electron backscatter diffraction (EBSD) has been used to analyze the crystallographic orientation of nano-particles embedded in the film microstructure. The superconducting YBa2Cu3O7 (Y-123) phase matrix is textured with a dominant (001) orientation for all samples, whereas the M-2411 phase exhibits a random orientation. Angular critical current measurements at various temperature (T) and applied magnetic field (B) have been performed on thin films containing different concentration of the M-2411 second phase. An increase in critical current density J c at T < 77 K and B < 6 T is observed for samples with low concentration of the second phase (2 mol % M-2411). Films containing 5 mol % Ag-2411 exhibit lower Jc than pure Y-123 thin films at all fields and temperatures. Samples with 5 mol % Nb-2411 show higher Jc(B) than phase pure Y-123 thin films for T < 77 K

Mayer-Rokitansky-Kuster-Hauser syndrome with gonadohypoplasia:a rare case report

MRKH (Mayer Rokitansky Kuster Hauser) syndrome is a congenital abnormality seen in one out of 5,000 women characterized by the agenesis of the vagina, cervix, and uterus. It is also associated with kidney, bone and hearing difficulties. The ovaries are present with a normal function similar to that of a healthy reproductive woman’s by producing eggs and female hormones. Chromosomes are the normal 46xx female karyotype. We report this rare syndrome in a 26–year-old female where she had presented with complaints of absence of uterus with the absence of left kidney. She didn’t attain menarchy, secondary sexual characters are well developed. Small right ovarian follicular cyst with a rim of ovarian tissue was observed. She had undergone vaginoplasty

Enhanced self-field critical current density of nano-composite YBa(2)Cu(3)O(7) thin films grown by pulsed-laser deposition

This is the author's accepted manuscript. The final published article is available from the link below. Copyright @ EPLA, 2008.Enhanced self-field critical current density Jc of novel, high-temperature superconducting thin films is reported. Layers are deposited on (001) MgO substrates by laser ablation of YBa2Cu3O7−δ(Y-123) ceramics containing Y2Ba4CuMOx (M-2411, M=Ag, Nb, Ru, Zr) nano-particles. The Jc of films depends on the secondary-phase content of the ceramic targets, which was varied between 0 and 15 mol%. Composite layers (2 mol% of Ag-2411 and Nb-2411) exhibit Jc values at 77 K of up to 5.1 MA/cm2, which is 3 to 4 times higher than those observed in films deposited from phase pure Y-123 ceramics. Nb-2411 grows epitaxially in the composite layers and the estimated crystallite size is ~10 nm.The Austrian Science Fund, the Austrian Federal Ministry of Economics and Labour, the European Science Foundation and the Higher Education Commission of Pakistan

Growth rate of YBCO single grains containing Y-2411(M)

Y-Ba-Cu-O (YBCO) single grains have the potential to generate large trapped magnetic fields for a variety of engineering applications, and research on the processing and properties of this material has attracted world-wide interest. In particular, the introduction of flux pinning centres to the large grain microstructure to improve its current density, Jc, and hence trapped field, has been investigated extensively over the past decade. Y 2Ba4CuMOx [Y-2411(M)], where M = Nb, Ta, Mo, W, Ru, Zr, Bi and Ag, has been reported to form particularly effective flux pinning centres in YBCO due primarily to its ability to exist as nano-size inclusions in the superconducting phase matrix. However, the addition of the Y-2411(M) phase to the precursor composition complicates the melt-processing of single grains. We report an investigation of the growth rate of single YBCO grains containing Y-2411(Bi) phase inclusions and Y2O3. The superconducting properties of these large single grains have been measured specifically to investigate the effect of Y2O3 on broadening the growth window of these materials

Studies of cracking behavior in melt-processed YBCO bulk superconductors

An important phenomenon in bulk superconductors fabricated by top-seeded-melt growth (TSMG) is the formation of cracks due to the inherent brittleness of the YBa2Cu3O7-δ (Y-123) phase matrix. These form during the fabrication of the superconducting monolith and play an important role in the limitation of current flow. However, cracks may also form during cooling cycles of the sample to liquid nitrogen temperatures. In this investigation, macrocracks along the c-direction, in particular were analyzed microscopically before and after cooling. In addition we attempt to resolve the c-axis macrocrack formation pattern using the magnetoscan technique

Complete androgenin sensitivity syndrome presenting with primary amenorrhoea and inguinal mass: a case report

Androgen insensitivity syndrome (AIS), also known as testicular feminization, an X-linked recessive disorder comprises a wide range of phenotypes that are caused by various types of mutations in the androgen receptor gene. AIs can be classified as complete, partial, or mild based on the phenotypic presentation. The clinical findings include a female type of external genitalia, 46-XY karyotype, absence of Mullerian structures, presence of Wolffian structures to various degree, and normal to high testosterone and gonadotropin levels. We report this case as an interesting and rare syndrome. The patient is a 15-year-old phenotypic female who presented with primary amenorrhea and normal-appearing external genitalia. Orchidectomy was done after proper counselling and proper psychological support was given to her

DUAL-WAY ELECTRIC TRACTION DRIVE FOR AN ULTRACAPACITOR PACK

A hybrid energy storage system made up of battery power unit as well as an ultra capacitor pack is recognized as. A parallel electricity-linked multi input ripper tools having a half-bridge bidirectional Electricity/Electricity cell topology is selected to link battery Or ultra capacitor storage space uses the electricity-link. The paper concentrates on modeling the suggested ripper tools for dynamic and steady condition analysis. This paper presents modeling, design and analysis of the bidirectional half-bridge Electricity/Electricity ripper tools appropriate for power electronic interface between your primary energy storage system and also the electric traction drive in hybrid electric vehicles. Averaging and linearization techniques are applied to get the averaged condition space models and small signal types of the ripper tools both in boost and buck operation modes. A qualifying criterion for sizing the ripper tools passive components in line with the enforced design specifications and constraints is highlighted. Particularly, short-circuit problems and open-circuit problems of diodes and transistors are examined. Simulation outcomes of the buck-boost ripper tools during normal functioning and under faulty the weather is presented