Limits on the Dipole Moments of the τ\tau-Lepton via the Process $e^{+}e^{-}\to \tau^+ \tau^- \gamma in a Left-Right Symmetric Model

Limits on the anomalous magnetic moment and the electric dipole moment of the $\tau$ lepton are calculated through the reaction $e^{+}e^{-}\to \tau^+ \tau^- \gamma$ at the $Z_1$-pole and in the framework of a left-right symmetric model. The results are based on the recent data reported by the L3 Collaboration at CERN LEP. Due to the stringent limit of the model mixing angle $\phi$, the effect of this angle on the dipole moments is quite small.Comment: 15 pages, 3 figure

A unified evaluation of iterative projection algorithms for phase retrieval

Iterative projection algorithms are successfully being used as a substitute of lenses to recombine, numerically rather than optically, light scattered by illuminated objects. Images obtained computationally allow aberration-free diffraction-limited imaging and the possibility of using radiation for which no lenses exist. The challenge of this imaging technique is transfered from the lenses to the algorithms. We evaluate these new computational ``instruments'' developed for the phase retrieval problem, and discuss acceleration strategies.Comment: 12 pages, 9 figures, revte

Normal zone in YBa2Cu3O6+xYBa_2Cu_3O_{6+x}-coated conductors

We consider the distribution of an electric field in YBCO-coated conductors for a situation in which the DC transport current is forced into the copper stabilizer due to a weak link -- a section of the superconducting film with a critical current less than the transport current. The electric field in the metal substrate is also discussed. The results are compared with recent experiments on normal zone propagation in coated conductors for which the substrate and stabilizer are insulated from each other. The potential difference between the substrate and stabilizer, and the electric field in the substrate outside the normal zone can be accounted for by a large screening length in the substrate, comparable to the length of the sample. During a quench, the electric field inside the interface between YBCO and stabilizer, as well as in the buffer layer, can be several orders of magnitude greater than the longitudinal macroscopic electric field inside the normal zone. We speculate on the possibility of using possible microscopic electric discharges caused by this large ($\sim$kV/cm) electric field as a means to detect a quench.Comment: 8 pages, 4 figure

The effects of superconductor-stabilizer interfacial resistance on quench of current-carrying coated conductor

We present the results of numerical analysis of a model of normal zone propagation in coated conductors. The main emphasis is on the effects of increased contact resistance between the superconducting film and the stabilizer on the speed of normal zone propagation, the maximum temperature rise inside the normal zone, and the stability margins. We show that with increasing contact resistance the speed of normal zone propagation increases, the maximum temperature inside the normal zone decreases, and stability margins shrink. This may have an overall beneficial effect on quench protection quality of coated conductors. We also briefly discuss the propagation of solitons and development of the temperature modulation along the wire.Comment: To be published in Superconductor Science and Technology. This preprint contains one animated figure (Fig. 6(a)). when asked whether you want to play the content, click "Play". Acrobat Reader (Windows and Mac, but not Linux) will play embedded flash movies. In the printed copy Fig. 6(b) will show the temperature profile at gamma t=15

The effects of superconductor-stabilizer interfacial resistance on quench of a pancake coil made out of coated conductor

We present the results of numerical analysis of normal zone propagation in a stack of $YBa_2Cu_3O_{7-x}$ coated conductors which imitates a pancake coil. Our main purpose is to determine whether the quench protection quality of such coils can be substantially improved by increased contact resistance between the superconducting film and the stabilizer. We show that with increased contact resistance the speed of normal zone propagation increases, the detection of a normal zone inside the coil becomes possible earlier, when the peak temperature inside the normal zone is lower, and stability margins shrink. Thus, increasing contact resistance may become a viable option for improving the prospects of coated conductors for high $T_c$ magnets applications.Comment: 9 pages, 4 figure

Local dissipation effects in two-dimensional quantum Josephson junction arrays with magnetic field

We study the quantum phase transitions in two-dimensional arrays of Josephson-couples junctions with short range Josephson couplings (given by the Josephson energy) and the charging energy. We map the problem onto the solvable quantum generalization of the spherical model that improves over the mean-field theory method. The arrays are placed on the top of a two-dimensional electron gas separated by an insulator. We include effects of the local dissipation in the presence of an external magnetic flux f in square lattice for several rational fluxes f=0,1/2,1/3,1/4 and 1/6. We also have examined the T=0 superconducting-insulator phase boundary as function of a dissipation alpha for two different geometry of the lattice: square and triangular. We have found critical value of the dissipation parameter independent on geometry of the lattice and presence magnetic field.Comment: accepted to PR

Measuring Fundamental Galactic Parameters with Stellar Tidal Streams and SIM PlanetQuest

Extended halo tidal streams from disrupting Milky Way satellites offer new opportunities for gauging fundamental Galactic parameters without challenging observations of the Galactic center. In the roughly spherical Galactic potential tidal debris from a satellite system is largely confined to a single plane containing the Galactic center, so accurate distances to stars in the tidal stream can be used to gauge the Galactic center distance, R_0, given reasonable projection of the stream orbital pole on the X_GC axis. Alternatively, a tidal stream with orbital pole near the Y_GC axis, like the Sagittarius stream, can be used to derive the speed of the Local Standard of Rest (\Theta_LSR). Modest improvements in current astrometric catalogues might allow this measurement to be made, but NASA's Space Interferometry Mission (SIM PlanetQuest) can definitively obtain both R_0 and \Theta_LSR using tidal streams.Comment: 8 pages, 4 figures, accepted for publication in ApJ Letters (minor text revisions). Version with high resolution figures available at http://www.astro.caltech.edu/~drlaw/Papers/GalaxyParameters.pd

Constraints on Z1-Z2 Mixing from the Decay Z1→e−e+Z1 \to e-e+ in the left-right Symmetric Model

We examine the decay of $Z_1$ in electrons with recent data from LEP. The partial width $\Gamma(Z_1\to e^-e^+)$ is studied in the framework of a left-right symmetric model with standard electroweak corrections. Processes measured near the resonance has served to measure the neutral coupling constants very precisely, which is useful to set bounds on the parameters of the model. This partial decay occurs in the resonance zone. As a consecuence the process is independent of the mass of the additional $Z_2$ heavy gauge boson which appears in this kind of models and so we have the mixing angle \f between the left and the right bosons as the only additional parameter. In this paper we take advantage of this fact to set a bound for \f: -9\times 10^{-3}\leq\f\leq 4\times 10^{-3}, which is in agreement with other constraints previously reported.Comment: 14 pages in Latex, 3 figures available on reques