11,773 research outputs found
Fingering Instability in a Water-Sand Mixture
The temporal evolution of a water-sand interface driven by gravity is
experimentally investigated. By means of a Fourier analysis of the evolving
interface the growth rates are determined for the different modes appearing in
the developing front. To model the observed behavior we apply the idea of the
Rayleigh-Taylor instability for two stratified fluids. Carrying out a linear
stability analysis we calculate the growth rates from the corresponding
dispersion relations for finite and infinite cell sizes. Based on the
theoretical results the viscosity of the suspension is estimated to be
approximately 100 times higher than that of pure water, in agreement with other
experimental findings.Comment: 11 pages, 12 figures, RevTeX; final versio
Photodetection in silicon beyond the band edge with surface states
Silicon is an extremely attractive material platform for integrated optics at
telecommunications wavelengths, particularly for integration with CMOS
circuits. Developing detectors and electrically pumped lasers at telecom
wavelengths are the two main technological hurdles before silicon can become a
comprehensive platform for integrated optics. We report on the generation of
free carriers in unimplanted SOI ridge waveguides, which we attribute to
surface state absorption. By electrically contacting the waveguides, a
photodetector with a responsivity of 36 mA/W and quantum efficiency of 2.8% is
demonstrated. The photoconductive effect is shown to have minimal falloff at
speeds of up to 60 Mhz
Macroporous silicon membranes as electron and x-ray transmissive windows
Macroporous silicon membranes are fabricated whose pores are terminated with 60 nm thin silicon dioxide shells. The transmission of electrons with energies of 5 kV-25 kV through these membranes was investigated reaching a maximum of 22% for 25 kV. Furthermore, the transmission of electromagnetic radiation ranging from the far-infrared to the x-ray region was determined. The results suggest the application of the membrane as window material for electron optics and energy dispersive x-ray detectors
Ga^+ beam lithography for nanoscale silicon reactive ion etching
By using a dry etch chemistry which relies on the highly preferential etching of silicon, over that of gallium (Ga), we show resist-free fabrication of precision, high aspect ratio nanostructures and microstructures in silicon using a focused ion beam (FIB) and an inductively coupled plasma reactive ion etcher (ICP-RIE). Silicon etch masks are patterned via Ga^+ ion implantation in a FIB and then anisotropically etched in an ICP-RIE using fluorinated etch chemistries. We determine the critical areal density of the implanted Ga layer in silicon required to achieve a desired etch depth for both a Pseudo Bosch (SF_6/C_4F_8) and cryogenic fluorine (SF_6/O_2) silicon etching. High fidelity nanoscale structures down to 30 nm and high aspect ratio structures of 17:1 are demonstrated. Since etch masks may be patterned on uneven surfaces, we utilize this lithography to create multilayer structures in silicon. The linear selectivity versus implanted Ga density enables grayscale lithography. Limits on the ultimate resolution and selectivity of Ga lithography are also discussed
Design of a tunable, room temperature, continuous-wave terahertz source and detector using silicon waveguides
We describe the design of a silicon-based source for radiation in the 0.5-14 THz regime. This new class of devices will permit continuously tunable, milliwatt scale, cw, room temperature operation, a substantial advance over currently available technologies. Our silicon terahertz generator consists of a silicon waveguide for near-infrared radiation, contained within a metal waveguide for terahertz radiation. A nonlinear polymer cladding permits two near-infrared lasers to mix, and through difference-frequency generation produces terahertz output. The small dimensions of the design greatly increase the optical fields, enhancing the nonlinear effect. The design can also be used to detect terahertz radiation
Polydimethylsiloxane based microfluidic diode
In this paper, we present a novel elastomer-based microfluidic device for rectifying flow. The device is analogous to an electronic diode in function since it allows flow in one direction and stops flow in the opposing direction. The device is planar, in-line and can be replica molded via standard soft lithography techniques. The fabrication process is outlined in detail and follows a simple procedure that requires only photolithography and one replica molding step. Several geometries of devices are presented along with their flow versus pressure characteristics. A brief discussion of the device behavior is presented along with possible uses for the device
Wafer-bonded single-crystal silicon slot waveguides and ring resonators
We fabricated horizontal Si slot waveguides with a 25 nm SiO2 slot layer by bonding thin Si-on-insulator wafers. After removing the Si substrate and buried oxide from one side of the bonded structure, grating-coupled waveguides and ring resonators were partially etched into the Si/SiO2/Si device layers. The gratings exhibit efficiencies of up to 23% at 1550 nm and the ring resonators were measured to have loaded quality factors near 42 000 for the lowest-order transverse-electric mode, corresponding to a propagation loss of 15 dB/cm. The leaky lowest-order transverse-magnetic mode was also observed with a propagation loss of 44 dB/cm
Photonic Crystal Nanocavities and Waveguides
Fabrication of optical structures has evolved to a precision which allows us to control light within etched nanostructures. Nano-optic cavities can be used for efficient and flexible concentration of light in small volumes, and control over both emission wavelength and frequency. Conversely, if a periodic pattern is defined in the top semitransparent metal layer by lithography, it is possible to efficiently couple out the light out of a semiconductor and to simultaneously enhance the spontaneous emission rate. Here we demonstrate the use of photonic crystals for efficient light localization and light extraction
Photonic Crystals and their Applications to Efficient Light Emitters
When combined with high index contrast slabs in which light can be efficiently guided, microfabricated two-dimensional photonic bandgap mirrors provide us with the geometries needed to confine and concentrate light into extremely small volumes and to obtain very high field intensities. Fabrication of optical structures has now evolved to a precision which allows us to control light within such etched nanostructures. Sub-wavelength nano-optic cavities can be used for efficient and flexible control over both emission wavelength and frequency, and nanofabricated optical waveguides can be used for efficient coupling of light between devices. The reduction of the size of optical components leads to their integration in large numbers and the possibility to combine different functionalities on a single chip. We show uses of such crystals in functional nonlinear optical devices, such as lasers, modulators, add/drop filters, polarizers and detectors
- …