Effect of Geometrical Imperfections on the Response of Dry-Joint Masonry Arches to Support Settlements

This paper aims to investigate the effects of geometrical imperfections on the response of a scaled dry-joint arch to the vertical displacement of one support. The arch behaviour was analysed in the large displacement regime using both physical and numerical modelling. The experimental tests were performed on 1:10 small-scale models made of bicomponent composite blocks with dry joints. In order to evaluate the geometrical accuracy of the blocks, two different sets of voussoirs were produced. The numerical simulations were carried out using a finite element (FE) micro-modelling approach, where the arch was modelled as an assembly of very stiff voussoirs connected by nonlinear interfaces. Particular attention was paid to the interface stiffness, which was set so as to tune the numerical model with the experimental evidence. Experimental and numerical results were then compared in terms of collapse mechanism, hinge configuration and ultimate displacement capacity. The imperfections of the physical models were found to significantly affect the arch response

Seismic assessment of masonry cross vaults through non-linear static analyses

Masonry cross vaults are common structural elements in historical buildings. They are largely diffused in all European countries, including those characterized by higher levels of seismicity. Although they have been constructed for centuries, they represent some of the most vulnerable elements of traditional architecture, especially with reference to horizontal loads. The understanding of their behaviour under seismic loading and the definition of their safety are crucial aspects for the accurate assessment of the global health conditions of historical buildings. In the present work, masonry cross vaults are analysed through the Finite Element Method (FEM) and static non-linear analyses are performed considering the effect of different brick pattern. A simplified micro-modelling approach is adopted for the generation of the FEM models and two different brick arrangements are considered, i.e., radial bricks and diagonal bricks, which are the most widespread in European cross vaults. Static non-linear analyses are performed by monotonically incrementing a lateral acceleration until collapse. Results are analysed in terms of maximum load factor, crack pattern and damage mechanisms. The analysis of the results shows that the masonry apparatus strongly influences the vault seismic response both in terms of stiffness and ductility as well as in terms of global capacity

Seismic behaviour of cross vaults with different brick pattern

Cross masonry vaults are common structural elements in historical buildings. They are largely diffused in all European countries, including those characterized by higher levels of seismicity. Although they have been constructed for centuries, they represent some of the most vulnerable elements of traditional architecture, especially with reference to horizontal loads. The understanding of their structural behaviour under seismic loading is a crucial aspect for the accurate assessment of the safety of historical buildings. In the present work, the seismic response of cross masonry vaults is analysed through the Finite Element Method (FEM) and static non-linear analyses considering the effect of different brick patterns and boundary conditions. A simplified micro-modelling approach is adopted for the generation of the FEM models and two different brick arrangements are considered, i.e., radial bricks and diagonal bricks, which are the most widespread in European cross vaults. Two different boundary conditions are assumed in order to simulate a vault with and without lateral confinement. Static non-linear analyses are performed by monotonically incrementing a lateral acceleration until collapse. Results are analysed in terms of maximum load factor, stiffness, ductility, crack pattern and damage mechanisms. The analysis of the results shows that not only boundary conditions, but also the brick pattern strongly influences the vault seismic response both in terms of stiffness and ductility as well as in terms of global capacity

A Study of Charged P-wave D Meson Production in Semileptonic B Decays

A Study of Charged P-wave D Meson Production in Semileptonic B Decays. A search for the semileptonic decay of B mesons into final states involving charged D** as well as non resonant D0-pi is performed in a sample of approximately 3 million hadronic Z decays recorded with the ALEPH detector at LEP. Topological vertex criteria are used to separate the B -> D**+ l nu X signal from background as well as to search for the non-resonant component B -> D0 pi l nu X. Preliminary results for the branching fraction into resonant and non-resonant components are presented

Three-Dimensional Limit Analysis of the Vicoforte Elliptical Dome

Limit Analysis provides a conceptually simple and robust method to estimate the safety of structures and has been long applied to the analysis of the ultimate collapse state of two-dimensional masonry structures or structural elements. In revolving symmetric domes, the three-dimensional problem can be reduced to the two-dimensional case under appropriate hypotheses. The Vicoforte dome is the largest elliptical dome in the world, and its complex geometry makes this kind of analysis not straightforward. Starting from some basic assumptions, a method for analyzing the three-dimensional elliptical geometry and understand the behavior at collapse of the drum-dome system using limit analysis is proposed. The three dimensional collapse mechanism is found and the system behavior including the presence of tension rings at different levels is interpreted. The results are compared against a nonlinear finite element model

Measurement of the Charge Collection Efficiency after Heavy Non-Uniform Irradiation in BaBar Silicon Detectors

We have investigated the depletion voltage changes, the leakage current increase and the charge collection efficiency of a silicon microstrip detector identical to those used in the inner layers of the BaBar Silicon Vertex Tracker (SVT) after heavy non-uniform irradiation. A full SVT module with the front-end electronics connected has been irradiated with a 0.9 GeV electron beam up to a peak fluence of 3.5 x 10^14 e^-/cm^2, well beyond the level causing substrate type inversion. We irradiated one of the two sensors composing the module with a non-uniform profile with sigma=1.4 mm that simulates the conditions encountered in the BaBar experiment by the modules intersecting the horizontal machine plane. The position dependence of the charge collection properties and the depletion voltage have been investigated in detail using a 1060 nm LED and an innovative measuring technique based only on the digital output of the chip.Comment: 7 pages, 13 figures. Presented at the 2004 IEEE Nuclear Science Symposium, October 18-21, Rome, Italy. Accepted for publication by IEEE Transactions on Nuclear Scienc

CYP72A67 catalyses a key oxidative step in Medicago truncatula hemolytic saponin biosynthesis

In the Medicago genus, triterpenic saponins are bioactive secondary metabolites constitutively synthesized in the aerial and subterranean parts of plants via the isoprenoid pathway. Exploitation of saponins as pharmaceutics, agrochemicals and in the food and cosmetic industries has raised interest in identifying the enzymes involved in their synthesis. We have identified a cytochrome P450 (CYP72A67) involved in hemolytic sapogenin biosynthesis by a reverse genetic TILLING approach in a Medicago truncatula ethylmethanesulfonate (EMS) mutagenized collection. Genetic and biochemical analyses, mutant complementation, and expression of the gene in a microsome yeast system showed that CYP72A67 is responsible for hydroxylation at the C-2 position downstreamof oleanolic acid synthesis. The affinity of CYP72A67 for substrates with different substitutions at multiple carbon positions was investigated in the same in vitro yeast system, and in relation to two other CYP450s (CYP72A68) responsible for the production of medicagenic acid, the main sapogenin in M. truncatula leaves and roots. Full sib mutant and wild-type plants were compared for their sapogenin profile, expression patterns of the genes involved in sapogenin synthesis, and response to inoculation with Sinorhizobium meliloti. The results obtained allowed us to revise the hemolytic sapogenin pathway in M. truncatula and contribute to highlighting the tissue specificities (leaves/roots) of sapogenin synthesis

Publication and patent analysis of European researchers in the field of production technology and manufacturing systems

This paper develops a structured comparison among a sample of European researchers in the field of Production Technology and Manufacturing Systems, on the basis of scientific publications and patents. Researchers are evaluated and compared by a variegated set of indicators concerning (1) the output of individual researchers and (2) that of groups of researchers from the same country. While not claiming to be exhaustive, the results of this preliminary study provide a rough indication of the publishing and patenting activity of researchers in the field of interest, identifying (dis)similarities between different countries. Of particular interest is a proposal for aggregating analysis results by means of maps based on publication and patent indicators. A large amount of empirical data are presented and discusse

SuperB: a linear high-luminosity B Factory

This paper is based on the outcome of the activity that has taken place during the recent workshop on "SuperB in Italy" held in Frascati on November 11-12, 2005. The workshop was opened by a theoretical introduction of Marco Ciuchini and was structured in two working groups. One focused on the machine and the other on the detector and experimental issues. The present status on CP is mainly based on the results achieved by BaBar and Belle. Estabilishment of the indirect CP violation in B sector in 2001 and of the direct CP violation in 2004 thanks to the success of PEP-II and KEKB e+e- asymmetric B Factories operating at the center of mass energy corresponding to the mass of the Y(4s). With the two B Factories taking data, the Unitarity Triangle is now beginning to be overconstrained by improving the measurements of the sides and now also of the angles alpha, and gamma. We are also in presence of the very intriguing results about the measurements of sin(2 beta) in the time dependent analysis of decay channels via penguin loops, where b --> s sbar s and b --> s dbar d. Tau physics, in particular LFV search, as well as charm and ISR physics are important parts of the scientific program of a SuperB Factory. The physics case together with possible scenarios for the high luminosity SuperB Factory based on the concepts of the Linear Collider and the related experimental issues are discussed.Comment: 22 pages, 22 figures, INFN Roadmap Repor

Seismic Performance of Masonry Cross Vaults through Shaking Table Testing on a Scaled Model

Masonry cross vaults are among the most widely used typologies of horizontal structural elements for covering spaces of both ordinary and monumental buildings in the European countries. Their seismic vulnerability has been proved by systematic damages and collapses surveyed throughout the centuries. Therefore, the assessment of their structural safety is a crucial issue for the conservation and preservation of historical buildings. Although various methods have been developed and used to analyse both the stability (e.g. equilibrium method) and the dynamic behaviour (e.g. finite and discrete element approaches) of vaulted structures, experimental studies are constantly needed to validate and calibrate models. In this regard, limited experimental studies to understand the dynamic response of vaults have been done. The present paper describes the results of shake table tests on a 1:5 scaled cross vault model made of 3D printed blocks assembled with dry joints, carried out at the 3D LNEC shake table (Portugal). The main aim of the tests is to investigate one of the most typical seismic damage for cross vaults: the shear failure. This type of mechanism frequently affects vaults of lateral aisles and it is mainly caused by a significant difference in stiffness of vaults’ supports. Indeed, the lower stiffness of the central nave colonnade compared to the external wall may induce an in-plane shear distortion of the vault caused by a differential longitudinal displacement of its opposite sides. Incremental seismic motions are conducted up to collapse using Emilia Romagna earthquake. The results are analysed in terms crack pattern and damage mechanisms