62 research outputs found
Formation of hot tear under controlled solidification conditions
Aluminum alloy 7050 is known for its superior mechanical properties, and thus finds its application in aerospace industry. Vertical direct-chill (DC) casting process is typically employed for producing such an alloy. Despite its advantages, AA7050 is considered as a "hard-to-cast" alloy because of its propensity to cold cracking. This type of cracks occurs catastrophically and is difficult to predict. Previous research suggested that such a crack could be initiated by undeveloped hot tears (microscopic hot tear) formed during the DC casting process if they reach a certain critical size. However, validation of such a hypothesis has not been done yet. Therefore, a method to produce a hot tear with a controlled size is needed as part of the verification studies. In the current study, we demonstrate a method that has a potential to control the size of the created hot tear in a small-scale solidification process. We found that by changing two variables, cooling rate and displacement compensation rate, the size of the hot tear during solidification can be modified in a controlled way. An X-ray microtomography characterization technique is utilized to quantify the created hot tear. We suggest that feeding and strain rate during DC casting are more important compared with the exerted force on the sample for the formation of a hot tear. In addition, we show that there are four different domains of hot-tear development in the explored experimental window-compression, microscopic hot tear, macroscopic hot tear, and failure. The samples produced in the current study will be used for subsequent experiments that simulate cold-cracking conditions to confirm the earlier proposed model.This research was carried out within the Materials innovation institute (www.m2i.nl) research framework, project no. M42.5.09340
InfluĂŞncia do tempo de espera na fluidez da liga comercial A356 com estrutura globular no estado semi-sĂłlido
Prediction of elongation of superplastic materials — influence of grain growth and cavitation
Correlations between microstructure and rheological behaviour of partial melt alloys
International audienc
Influence of grain refinement on hot tearing in aluminium-copper alloys used in foundry industries
International audienceThe hot tearing of aluminium-copper alloys is a serious defect for the foundrymen. The grain refinement of these alloys allows to decrease their hot tearing susceptibility. The aim of this work is to better understand the hot tearing mechanism and the grain refinement action. So, hot tearing tests and tensile tests in the mushy state have been performed. Moreover, a hot tearing model, based on the nucleation and growth of a cavity in a liquid film and taking into account the mushy zone rheology, has been developed
Caractérisation 3D par microtomographie X in-situ des évolutions microstructurales se produisant à l'état semi-solide dans des alliages Al-Cu
Age-hardening behavior of Al-wt%/Mg/SiCo composites fabricated with TiO2 coated SiC particles
- …