726 research outputs found
Recommended from our members
Significance of the microfluidic concepts for the improvement of macroscopic models of transport phenomena
This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.Complexity of transport phenomena - ranging from macroscopic motion of matter, heat transfer, over to the molecular motions determining the overall flow properties of fluids, or generally aggregation states of matter – inhibited development of a single mathematical model describing simultaneously
transport processes at all relevant scales. In classical engineering sciences at each scale level we have different equations, different fundamental variables and different methods of solution [4]. The established basis of the classical fluid dynamics - the Navier-Stokes equations [1, 3] - have apparently nothing in common with molecular physics. At the macroscopic scale of motion the molecular structure of matter
and the microscopic molecular motions are ignored (even though they determine the local macroscopic behaviour) [1, 3, 4]. To describe multiphase flows, still other methods must be used – increasing further the
number of equations, methods of solution etc. The serious disadvantage of this approach is, that equations describing macroscopic models (Navier-Stokes and there from derived equations), introduce multiple
theoretical problems: - higher order continuity requirements [3]; - numerous paradoxes in simple macroscopic flows (Bernoulli eq.); - different equations with different fundamental variables and different methods of solution, build a set of
disciplines devoted in principle to a single problem – dynamics of disperse systems
Recommended from our members
Microfluidic droplet control by photothermal interfacial flow
This paper was presented at the 4th Micro and Nano Flows Conference (MNF2014), which was held at University College, London, UK. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute, ASME Press, LCN London Centre for Nanotechnology, UCL University College London, UCL Engineering, the International NanoScience Community, www.nanopaprika.eu.Droplet-based microfluidics is an emerging field that can perform a variety of discrete operation of
tiny amount of reagent or individual cell. Noncontact manipulation of droplets in a microfluidic platform can
be achieved by using the Marangoni convection due to a local temperature gradient given by the irradiation
of heating light. This method provides noncontact, selective and flexible manipulation for droplets flowing in
microfluidic network. Although the potential of this selective operation method of droplets was confirmed,
the driving force exerted on droplets has not been quantitatively obtained. In this study, we have developed a
measurement system of the temperature field around droplets during the manipulation by light irradiation
and evaluated the manipulation force. In O/W emulsion system with oleic acid and buffer solution, oleic acid
for droplet and buffer solution for continuous phase, the temperature distribution around the droplets was
measured by laser-induced fluorescence. From the balance of drag force and photo-induced Marangoni force,
the driving force was determined. From the results, we confirmed the applicability of the noncontact droplet
manipulation using the photothermal Marangoni effect
Recommended from our members
Numerical characterization of silicon DC electro-osmotic pumps: the role of the micro channel geometry
This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.A numerical analysis of silicon DC open channel EOPs is presented to show which parameters should be taken into account in the design of these devices. Particular attention is paid to the influence of the channel cross-section geometry on pump behavior, especially in relation to the electrical properties of the fluid. Rectangular and trapezoidal, micro and nano channels chemically etched on silicon wafers are considered and a broad range of operative conditions are analyzed. In order to make all the results available, two user-friendly correlations that predict the characteristic curves of the pumps are given as functions of the relevant parameters. The EOP model used to obtain the results is explained extensively, as well as the method used to solve it. A brief discussion on the domain in which it applies is also presented
Recommended from our members
Microchannel fluid flow and heat transfer by lattice boltzmann method
This paper was presented at the 4th Micro and Nano Flows Conference (MNF2014), which was held at University College, London, UK. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute, ASME Press, LCN London Centre for Nanotechnology, UCL University College London, UCL Engineering, the International NanoScience Community, www.nanopaprika.eu.Micro flow has become a popular field of interest due to the advent of micro electromechanical systems (MEMS). In this work, the lattice Boltzmann method, a particle-based approach, is applied to simulate the two-dimensional micro channel fluid flow.
We simulated fluid flow and heat transfer inside microchannel, the prototype application of this study is micro-heat exchangers. The main incentive to look at fluidic behaviour at micron scale is that micro devices tend to behave much differently from the objects we are used to handling in daily life. The choice of using LBM for micro flow simulation is a good one owing to the fact that it is based on the Boltzmann equation which is valid for the whole range of the Knudsen number. Slip velocity and temperature jump boundary conditions are used for the microchannel simulations with Knudsen number values covering the slip flow. The lattice Bhatnagar-Gross-Krook single relaxation time approximation was used. The results found are compared with the Navier-Stokes analytical and numerical results available in the literature and good matches are observed
Recommended from our members
Simulation of the flow and the study of the effects of the surface roughness in isothermal gas flows of micro scale using Lattice Boltzmann method
This paper was presented at the 2nd Micro and Nano Flows Conference (MNF2009), which was held at Brunel University, West London, UK. The conference was organised by Brunel University and supported by the Institution of Mechanical Engineers, IPEM, the Italian Union of Thermofluid dynamics, the Process Intensification Network, HEXAG - the Heat Exchange Action Group and the Institute of Mathematics and its Applications.In this paper, a lattice Boltzmann method used in the simulation of the fluid flow in micro/nano scale is introduced and studied.
The method can be employed instead of NS equations in cases where the continuum assumption is no longer valid. In the present
study the aim is to investigate the effects of surface roughness on flow characteristics of micro/nano gas flows. In order to compare the final results, two flow geometries were chosen for which the numerical and experimental results were available. Surface roughness was increased in each stage (from completely smooth to 12% roughness) and its influences on the flow regime, pressure and velocity distribution, slip velocity and mass flow rate were studied. It is shown that surface roughness results in a decrease in the mass flow rate as well as slip velocity. Increasing the amount of roughness causes the mass flow rate to continually decrease, however this trend is inverted for the slip velocity
- …