515 research outputs found
Local Site Behaviour in the 1976 Friuli Earthquake
Soon after the main shock of Friuli, Italy, May 6th 1976 earthquake, two strong motion recorders accelerographs were installed in two sites about 650 meters distant one from the other. One instrument was installed on hard outcropping rock, the other at the surface of an alluvial deposit 20+25 meters thick underlain by a sloping bedrock. Among the numerous records obtained three aftershocks of magnitude about 6 and hypocentral distance within 20 Km, are investigated by comparing maximum accelerations, durations, Arias intensity and Husid ratios. A new numerical tool is proposed which consists of a series of plots of the Husid ratios of low-pass filtered accelerograms. The numerical tool seems to be very promising since it allows to describe at the same time energy, duration and frequencies content, of a given ground motion. Moreover the application to the records simultaneously obtained at the two stations suggests that it would be more appropriate to define an accelerogram according to the type of behavior shown by the site during a certain earthquake rather than according to the local site characteristics like soft or hard
Seletividade de herbicidas sobre Anadenanthera peregrina (Angico-Vermelho).
O objetivo deste trabalho foi verificar a seletividade de herbicidas utilizados em áreas de Eucalyptus, sobre o crescimento de Anadenanthera peregrina. O trabalho foi conduzido em casa de vegetação em duas épocas diferentes em 2003 e 2004, tendo 5 tratamentos com 4 doses de herbicidas em cada um e 6 repetições. Os tratamentos foram: haloxyfop-methyl nas doses (0,00 ; 120, 240 e 480 g.ha-1); sulfentrazone (0,00, 300, 600 e 1.200 g.ha-1); isoxaflutole (0,00, 150, 300 e 600 g.ha-1); oxyfluorfen (0,00, 720, 1.440 e 2.880 g.ha-1); e glyfhosate (0,00, 720, 1.440 e 2.880 g.ha-1). Em ambos os experimentos foram avaliados: efeitos fitotóxicos do produto, número de folíolos, altura de plantas, diâmetro de caule e biomassa seca da parte aérea; e no segundo foram feitas ainda a análise de clorofila a e b, e de carotenóides. O herbicida que apresentou maior fitoxicidade e que comprometeu o desenvolvimento do angico foi o glyphosate, com altos graus de fitotoxicidade, queda de folhas e redução da biomassa, sendo, portanto, não recomendado para o controle de invasoras em áreas de plantio de angico. Os outros herbicidas não comprometeram o desenvolvimento do angico, podendo ser usados no plantio de A. peregrina
RETROSPECTIVE EVALUATION OF THE INFLUENCE OF THE IL-1 GENOTYPE ON RADIOGRAPHIC BONE LEVELS IN TREATED PERIODONTAL PATIENTS MAINTAINED OVER 10 YEARS.
Tolerance of Anadenanthera peregrina to Eucalyptus camaldulensis and Eucalyptus grandis essential oil as condition for mixed plantation.
With the purpose of selecting the species of woody Caatinga for mixed plantations with Eucalyptus spp., the allelophatic effects of E. camaldulensis and E. grandis essential oil were studied on the growth activities of Anadenanthera peregrina. The plants were closed in glass chambers in the presence of volatile oil of E. camaldulensis or E. grandis at the concentration of 13 nl.cm-3. The number of leaves, height and diameter at soil lever were compared before, immediately after and after 30 days. Chlorophyll a and b, carotenoids and dry mass were evaluated after the treatment application. There was no inhibitory effect of E. camaldulensis and E. grandis oils on A. peregrina. E. camaldulensis, which was more adapted to semi-arid conditions, was planted in mixture stands with two native legume species, inoculated with Rhizobium and arbuscular mycorrhizal fungi. E. camaldulensis did not inhibit native species growth after two years of cultivation
Trigeminal ganglion transcriptome analysis in 2 rat models of medication-overuse headache reveals coherent and widespread induction of pronociceptive gene expression patterns
Comparison of pure and mixed gas permeation of the highly fluorinated polymer of intrinsic microporosity PIM-2 under dry and humid conditions: Experiment and modelling
This manuscript describes the gas separation performance of PIM-2, a partially fluorinated linear copolymer synthesized from 5,5',6,6'-tetrahydroxy-3,3,3',3'-tetramethylspirobisindane (TTSBI) and decafluorobiphenyl (DFBP). As one of the early members of the family of polymers of intrinsic microporosity, it had never been tested as a gas separation membrane because of insufficient mechanical resistance. This has been solved only recently, allowing the preparation of robust self-standing films. Molecular modelling studies demonstrated a high fractional free volume (34%) and an elevated surface area (642 m2 g-1), and the latter is in good agreement with experimental BET results. Pure gas permeabilities measured on a fixed-volume time-lag instrument at 1 bar compare well with the results of mixed separation tests on a variable volume setup from 1-6 bar(a). Molecular modelling and independent sorption measurements on a gravimetric sorption balance both show strong dual-mode sorption behaviour, especially for CO2 and to a lesser extent for CH4. Temperature-dependent pure gas permeation measurements show typical Arrhenius behaviour, with a clear increase in the activation energy for diffusion with the increasing molecular size of the gas, indicating high size-selectivity. This is in agreement with the highly rigid PIM structure, determined by AFM force spectroscopy measurements. The dual-mode behaviour results in a moderate pressure dependence of the CO2 permeability and the CO2/N2 and CO2/CH4 selectivity, all slightly decreasing with increasing pressure. The presence of humidity in the gas stream has a remarkable small effect on the membrane performance, which is probably due to the high fluorine content and the consequently low water vapour solubility in the polymer, as confirmed by gravimetric sorption measurements. The manuscript describes an extensive study on the structure-property relationships in PIM-2. © 2019 Elsevier B.V.European Commission, EC Grantová Agentura Ceské Republiky, GA Ä?R: 18-05484S --Research on biogas upgrading presented in this work was supported by EU structural funding in the frame of Operational Programme Research, Development and Education, project No. CZ.02.1.01./0.0/0.0/17_049/0008419 “COOPERATION”. This work was further supported by the CNR-CAS bilateral agreement 2016–2018 “Innovative polymeric membranes for pervaporation and advanced gas and vapour separations” and by the Czech Science Foundation (grant no. 18-05484S ). Appendix A -
Mechanical analysis of the ENEA TF coil proposal for the EU DEMO fusion reactor
The design of the superconducting magnet system of the European DEMO fusion reactor is currently being pursued in the framework of the EUROfusion Magnets Work Package (WPMAG). Three alternative winding pack (WP) options for the Toroidal Field Coils (TFCs) are being proposed by different research units, each featuring a different conductor manufacturing technology (react-and-wind vs. wind-and-react) or winding layout (layer vs. pancake).
One of the options (namely, WP#2), proposed by Italian ENEA, features a layer-wound WP design adopting a wind-and-react conductor with rectangular cross section with high aspect ratio, obtained squeezing an initially circular conductor.
In order to assess the capability of all the TFC components to withstand the electromagnetic loads due to the huge Lorentz forces without any structural failure during the magnet lifetime, the mechanical analysis of the 2016 version of the WP#2 design option is performed here applying a hierarchical approach herein defined as the Stress Recovery Tool (SRT): the Finite Element Analysis (FEA) of a whole magnet (including the casing) is performed at a low computational cost adopting a coarse WP model with smeared (homogenized) properties. The displacements computed on the smeared WP are then used as boundary conditions for a refined FEA of some WP slices, located in selected (critical) poloidal positions, where all the conductors detailed features (jacket, insulations) are properly accounted for
- …