Hybrid PCM\u2014aluminium foams\u2019 thermal storages: an experimental study

The latent heat absorption phenomenon associated with melting of a suitable Phase Change Material can be an effective way to improve the Thermal Energy Storage behaviour in many applications. However, the most suitable materials to be used in heating and refrigeration systems find intrinsic limitations due to their poor heat transfer capabilities. This work experimentally studies the use of aluminum foams as heat transfer medium to improve the overall heat transfer of paraffin waxes that can be possible phase change materials to be implemented in hybrid sensible-latent water thermal energy storages. The experimental tests were run in a dedicated setup designed, developed, and built at the Department of Management and Engineering of the University of Padova. The effects of the use of aluminum foams as enhancing heat transfer medium were studied by comparing the loading and unloading processes of a paraffin wax with melting temperature around 40 \ub0C, with and without metal foams, in a water thermal storage unit. The effects of three different foams with 5, 20, and 40 Pores Per Inch (PPI) were investigated

Energy performance of water strip modules for industrial heating in real operation conditions: Steady-state and CFD analyses

The objective of this study is the theoretical evaluation of the energy performance of a radiant strips heating system fed with hot water by varying the operating conditions. First, the convective coefficients and the heating power (both convective and radiant parts) of the heating system are evaluated in steady-state conditions by simulating heat exchange similar to real operating conditions (such as the presence of a ventilation system, the opening of doors, windows, or skylights, etc.), in comparison with the nominal data. To carry out this preliminary assessment, different references in the scientific literature are considered with respect to experimental measurements and numerical simulations for similar applications. The steady-state analysis revealed that the increase in the overall yield of the heating strips, compared to the data measured according to the EN 14,037 standard, is in the order of 30%. Afterward, a CFD analysis is reported to dynamically study the effect of the above-mentioned typical situations of real operation of the system in industrial sheds. The CFD analysis confirms that the presence of constant air exchange leads to an improvement of more than 30% in the performance of the water strip system. The main conclusion is that designing the water strip system following the EN 14,037 standard probably will oversize the industrial heating plant

Effects of a ketogenic diet in overweight women with polycystic ovary syndrome

Background: Polycystic ovary syndrome (PCOS) is the most common endocrine disorder in women during reproductive age. It is characterised clinically by oligo-ovulation or anovulation, hyper-androgenism, and the presence of polycystic ovaries. It is associated with an increased prevalence of metabolic syndrome, cardiovascular disease and type 2 diabetes. The onset of PCOS has been associated to several hereditary and environmental factors, but insulin resistance plays a key pathogenetic role. We sought to investigate the effects of a ketogenic diet (KD) on women of childbearing age with a diagnosis of PCOS. Methods: Fourteen overweight women with diagnosis of PCOS underwent to a ketogenic Mediterranean diet with phyoextracts (KEMEPHY) for 12 week. Changes in body weight, body mass index (BMI), fat body mass (FBM), lean body mass (LBM), visceral adipose tissue (VAT), insulin, glucose, HOMA-IR, total cholesterol, low density lipoprotein (LDL), high density lipoprotein (HDL), triglycerides (TGs), total and free testosterone, luteinizing hormone (LH), follicle stimulating hormone (FSH); dehydroepiandrosterone sulfate (DHEAs), estradiol, progesterone, sex hormone binding globulin (SHBG) and Ferriman Gallwey score were evaluated. Results: After 12 weeks, anthropometric and body composition measurements revealed a significant reduction of body weight (- 9.43 kg), BMI (- 3.35), FBM (8.29 kg) and VAT. There was a significant, slightly decrease of LBM. A significant decrease in glucose and insulin blood levels were observed, together with a significant improvement of HOMA-IR. A significant decrease of triglycerides, total cholesterol and LDL were observed along with a rise in HDL levels. The LH/FSH ratio, LH total and free testosterone, and DHEAS blood levels were also significantly reduced. Estradiol, progesterone and SHBG increased. The Ferriman Gallwey Score was slightly, although not significantly, reduced. Conclusions: Our results suggest that a KD may be considered as a valuable non pharmacological treatment for PCOS. Longer treatment periods should be tested to verify the effect of a KD on the dermatological aspects of PCOS. Trial registration Clinicaltrial.gov, NCT04163120, registrered 10 November 2019, retrospectively registered, https://clinicaltrials.gov

Genetic Variability in the Italian Heavy Draught Horse from Pedigree Data and Genomic Information

This study aimed to investigate the genetic diversity in the Italian Heavy Horse Breed from pedigree and genomic data. Pedigree information for 64,917 individuals were used to assess inbreeding level, effective population size (Ne), and effective numbers of founders and ancestors (fa /fe). Genotypic information from SNP markers were available for 267 individuals of both sexes, and it allowed estimating genomic inbreeding in two methods (observed versus expected homozygosity and from ROH) to study the breed genomic structure and possible selection signatures. Pedigree and genomic inbreeding were greatly correlated (0.65 on average). The inbreeding trend increased over time, apart from periods in which the base population enlarged, when Ne increased also. Recent bottlenecks did not occur in the genome, as fa /fe have shown. The observed homozygosity results were on average lower than expected, which was probably due to the use of French Breton stallions to support the breed genetic variability. High homozygous regions suggested that inbreeding increased in different periods. Two subpopulations were distinguished, which was probably due to the different inclusion of French animals by breeders. Few selection signatures were found at the population level, with possible associations to disease resistance. The almost low inbreeding rate suggested that despite the small breed size, conservation actions are not yet required

A Method for Thermal Performance Characterization of Ultra-Thin Vapor Chambers Cooled by Natural Convection

Vapor chamber technologies offer an attractive approach for passive cooling in portable electronic devices. Due to the market trends in device power consumption and thickness, vapor chamber effectiveness must be compared with alternative heat spreading materials at ultrathin form factors and low heat dissipation rates. A test facility is developed to experimentally characterize performance and analyze the behavior of ultrathin vapor chambers that must reject heat to the ambient via natural convection. The evaporatorside and ambient temperatures are measured directly; the condenser-side surface temperature distribution, which has critical ergonomics implications, is measured using an infrared (IR) camera calibrated pixel-by-pixel over the field of view and operating temperature range. The high thermal resistance imposed by natural convection in the vapor chamber heat dissipation pathway requires accurate prediction of the parasitic heat losses from the test facility using a combined experimental and numerical calibration procedure. Solid metal heat spreaders of known thermal conductivity are first tested, and the temperature distribution is reproduced using a numerical model for conduction in the heat spreader and thermal insulation by iteratively adjusting the external boundary conditions. A regression expression for the heat loss is developed as a function of measured operating conditions using the numerical model. A sample vapor chamber is tested for heat inputs below 2.5 W. Performance metrics are developed to characterize heat spreader performance in terms of the effective thermal resistance and the condenser-side temperature uniformity. The study offers a rigorous approach for testing and analysis of new vapor chamber designs, with accurate characterization of their performance relative to other heat spreaders

Challenges and opportunities of water quality monitoring and multi-stakeholder management in small islands: the case of Santa Cruz, Galápagos (Ecuador)

Sustainable water resources management roots in monitoring data reliability and a full engagement of all institutions involved in the water sector. When competences and interests are overlapping, however, coordination may be difficult, thus hampering cooperative actions. This is the case of Santa Cruz Island (Galápagos, Ecuador). A comprehensive assessment on water quality data (physico-chemical parameters, major elements, trace elements and coliforms) collected since 1985 revealed the need of optimizing monitoring efforts to fill knowledge gaps and to better target decision-making processes. A Water Committee (Comité de la gestión del Agua) was established to foster the coordinated action among stakeholders and to pave the way for joint monitoring in the island that can optimize the efforts for water quality assessment and protection. Shared procedures for data collection, sample analysis, evaluation and data assessment by an open-access geodatabase were proposed and implemented for the first time as a prototype in order to improve accountability and outreach towards civil society and water users. The overall results reveal the high potential of a well-structured and effective joint monitoring approach within a complex, multi-stakeholder framework.publishedVersio

Comparative analysis of inbreeding parameters and runs of homozygosity islands in 2 Italian autochthonous cattle breeds mainly raised in the Parmigiano-Reggiano cheese production region

Reggiana and Modenese are autochthonous cattle breeds, reared in the North of Italy, that can be mainly distinguished for their standard coat color (Reggiana is red, whereas Modenese is white with some pale gray shades). Almost all milk produced by these breeds is transformed into 2 mono-breed branded Parmigiano-Reggiano cheeses, from which farmers receive the economic incomes needed for the sustainable conservation of these animal genetic resources. After the setting up of their herd books in 1960s, these breeds experienced a strong reduction in the population size that was subsequently reverted starting in the 1990s (Reggiana) or more recently (Modenese) reaching at present a total of about 2,800 and 500 registered cows, respectively. Due to the small population size of these breeds, inbreeding is a very important cause of concern for their conservation programs. Inbreeding is traditionally estimated using pedigree data, which are summarized in an inbreeding coefficient calculated at the individual level (FPED). However, incompleteness of pedigree information and registration errors can affect the effectiveness of conservation strategies. High-throughput SNP genotyping platforms allow investigation of inbreeding using genome information that can overcome the limits of pedigree data. Several approaches have been proposed to estimate genomic inbreeding, with the use of runs of homozygosity (ROH) considered to be the more appropriate. In this study, several pedigree and genomic inbreeding parameters, calculated using the whole herd book populations or considering genotyping information (GeneSeek GGP Bovine 150K) from 1,684 Reggiana cattle and 323 Modenese cattle, were compared. Average inbreeding values per year were used to calculate effective population size. Reggiana breed had generally lower genomic inbreeding values than Modenese breed. The low correlation between pedigree-based and genomic-based parameters (ranging from 0.187 to 0.195 and 0.319 to 0.323 in the Reggiana and Modenese breeds, respectively) reflected the common problems of local populations in which pedigree records are not complete. The high proportion of short ROH over the total number of ROH indicates no major recent inbreeding events in both breeds. ROH islands spread over the genome of the 2 breeds (15 in Reggiana and 14 in Modenese) identified several signatures of selection. Some of these included genes affecting milk production traits, stature, body conformation traits (with a main ROH island in both breeds on BTA6 containing the ABCG2, NCAPG, and LCORL genes) and coat color (on BTA13 in Modenese containing the ASIP gene). In conclusion, this work provides an extensive comparative analysis of pedigree and genomic inbreeding parameters and relevant genomic information that will be useful in the conservation strategies of these 2 iconic local cattle breeds

Comparison of DNA extraction methods to detect Salmonella spp. from pig faeces and pork

The quality of DNA extract significantly influences the outcome of PCR-based detection methods. Performances of four different DNA extraction methods were evaluated for their ability to recover Salmonella DNA from artificially contaminated specimens. Swine faecal and pork samples were spiked with known concentration of Salmonella Typhimurium, DNA was then extracted by each of the methods considered and finally tested by a commercial Salmonella Real Time kit