Some Comparisons of Thermal Energy Consumption in a Temperature Versus a Subtropical Zone

Content: The aim of this desk study is to compare consumption of thermal energy in temperate vs. (sub)tropical climate for two representative processes: float heating (bating and dyeing) and chamber drying, with the view of contributing towards overall assessment of thermal energy consumption for tanneries operating under rather different conditions. The energy consumption is calculated for 1 t of wet salted hides and assuming that 1000 kg of wet salted weight corresponds to 1100 kg of pelt weight containing 838 kg of water and 262 kg of collagen subsequently segregated into grain leather and usable splits. Float rates (200% on pelt/shaved weight), average inlet water temperatures (15 oC vs. 25 oC), process float temperatures for bating (35 oC) and dyeing (60 o C) have been defined. Similarly, for computation of thermal energy for chamber drying, identical initial (45 %) and target leather humidity (20 %) are set and average respective fresh air temperature (15 oC vs. 30 oC) and fresh air relative humidity (50% vs. 70%) estimated and operating conditions such as exhaust air temperature and relative humidity defined. Based on such parameters and assumptions, specific ratios for thermal energy consumption for float heating (bating & dyeing) and for chamber drying have been calculated and comparisons made; the results might not quite coincide with common perceptions. The energy needs computed are net amounts, i.e. regardless of the source and without taking into account any losses and disregarding energy consumption for ambient heating and/or cooling. Thus, the total energy needs are much higher. The ratios computed for grain leather are valid for split leather as well. However, if the solar energy is used to support water heating, the conditions in the tropic zone are substantially more favourable, due to higher insolation and higher efficiency factor (i.e. difference of the final vs. inlet water temperature). Take-Away: Based on such parameters and assumptions, specific ratios for thermal energy consumption for float heating (bating & dyeing) and for chamber drying have been calculated and comparisons made; the results might not quite coincide with common perceptions. However, if the solar energy is used to support water heating, the conditions in the tropic zone are substantially more favourable, due to higher insolation and higher efficiency factor (i.e. difference of the final vs. inlet water temperature)

The genus Bolbelasmus in the western and southern regions of the Mediterranean Basin (Coleoptera: Geotrupidae: Bolboceratinae)

The Bolbelasmus Boucomont, 1911 species of the western and southern regions of the Mediterranean Basin (Northern Africa, Iberian Peninsula and France) are revised. The following three new species are described: Bolbelasmus brancoi Hillert & Král sp. nov. and Bolbelasmus howdeni Hillert & Král sp. nov., both from Spain and Gibraltar, and Bolbelasmus nikolajevi Hillert, Arnone, Král & Massa sp. nov. from Egypt, Libya and Tunisia. Bolbelasmus vaulogeri (Abeille de Perrin, 1898) stat. restit. is removed from synonymy with B. bocchus (Erichson, 1841) and reinstated as a separate species. Bolbelasmus romanorum Arnone & Massa, 2010 is considered a junior subjective synonym of B. vaulogeri. Lectotypes for Bolboceras bocchus Erichson, 1841 and Bolboceras vaulogeri Abeille de Perrin, 1898 are designated. Relevant diagnostic characters (head, pronotum, elytron, external male genitalia) are illustrated. Identifi cation keys for both males and females, and an annotated list of the Western Palaearctic representatives of the genus Bolbelasmus are presented. Finally, fi rst records are given for B. gallicus (Mulsant, 1842) from Corsica and the Midi-Pyrénées region of France, B. keithi Miessen & Trichas, 2011 from the Greek island of Rhodes, and B. unicornis (Schrank von Paula, 1789) from the Tuscany province of Italy

Coherent Control of Photocurrents in Graphene and Carbon Nanotubes

Coherent one photon ($2 \omega$) and two photon ($\omega$) electronic excitations are studied for graphene sheets and for carbon nanotubes using a long wavelength theory for the low energy electronic states. For graphene sheets we find that coherent superposition of these excitations produces a polar asymmetry in the momentum space distribution of the excited carriers with an angular dependence which depends on the relative polarization and phases of the incident fields. For semiconducting nanotubes we find a similar effect which depends on the square of the semiconducting gap, and we calculate its frequency dependence. We find that the third order nonlinearity which controls the direction of the photocurrent is robust for semiconducting t ubes and vanishes in the continuum theory for conducting tubes. We calculate corrections to these results arising from higher order crystal field effects on the band structure and briefly discuss some applications of the theory.Comment: 12 pages in RevTex, 6 epsf figure

Assigning channels via the meet-in-the-middle approach

We study the complexity of the Channel Assignment problem. By applying the meet-in-the-middle approach we get an algorithm for the $\ell$-bounded Channel Assignment (when the edge weights are bounded by $\ell$) running in time $O^*((2\sqrt{\ell+1})^n)$. This is the first algorithm which breaks the $(O(\ell))^n$ barrier. We extend this algorithm to the counting variant, at the cost of slightly higher polynomial factor. A major open problem asks whether Channel Assignment admits a $O(c^n)$-time algorithm, for a constant $c$ independent of $\ell$. We consider a similar question for Generalized T-Coloring, a CSP problem that generalizes \CA. We show that Generalized T-Coloring does not admit a $2^{2^{o\left(\sqrt{n}\right)}} {\rm poly}(r)$-time algorithm, where $r$ is the size of the instance.Comment: SWAT 2014: 282-29

Electric Polarization of Heteropolar Nanotubes as a Geometric Phase

The three-fold symmetry of planar boron nitride, the III-V analog to graphene, prohibits an electric polarization in its ground state, but this symmetry is broken when the sheet is wrapped to form a BN nanotube. We show that this leads to an electric polarization along the nanotube axis which is controlled by the quantum mechanical boundary conditions on its electronic states around the tube circumference. Thus the macroscopic dipole moment has an {\it intrinsically nonlocal quantum} mechanical origin from the wrapped dimension. We formulate this novel phenomenon using the Berry's phase approach and discuss its experimental consequences.Comment: 4 pages with 3 eps figures, updated with correction to Eqn (9

Counting flags in triangle-free digraphs

Motivated by the Caccetta-Haggkvist Conjecture, we prove that every digraph on n vertices with minimum outdegree 0.3465n contains an oriented triangle. This improves the bound of 0.3532n of Hamburger, Haxell and Kostochka. The main new tool we use in our proof is the theory of flag algebras developed recently by Razborov.Comment: 19 pages, 7 figures; this is the final version to appear in Combinatoric

Electron-Phonon Interacation in Quantum Dots: A Solvable Model

The relaxation of electrons in quantum dots via phonon emission is hindered by the discrete nature of the dot levels (phonon bottleneck). In order to clarify the issue theoretically we consider a system of $N$ discrete fermionic states (dot levels) coupled to an unlimited number of bosonic modes with the same energy (dispersionless phonons). In analogy to the Gram-Schmidt orthogonalization procedure, we perform a unitary transformation into new bosonic modes. Since only $N(N+1)/2$ of them couple to the fermions, a numerically exact treatment is possible. The formalism is applied to a GaAs quantum dot with only two electronic levels. If close to resonance with the phonon energy, the electronic transition shows a splitting due to quantum mechanical level repulsion. This is driven mainly by one bosonic mode, whereas the other two provide further polaronic renormalizations. The numerically exact results for the electron spectral function compare favourably with an analytic solution based on degenerate perturbation theory in the basis of shifted oscillator states. In contrast, the widely used selfconsistent first-order Born approximation proves insufficient in describing the rich spectral features.Comment: 8 pages, 4 figure

Generalized gradient expansions in quantum transport equations

Gradient expansions in quantum transport equations of a Kadanoff-Baym form have been reexamined. We have realized that in a consistent approach the expansion should be performed also inside of the self-energy in the scattering integrals of these equations. In the first perturbation order this internal expansion gives new correction terms to the generalized Boltzman equation. These correction terms are found here for several typical systems. Possible corrections to the theory of a linear response to weak electric fields are also discussed.Comment: 20 pages, latex, to appear in Journal of Statistical Physics, March (1997

Optical excitations in hexagonal nanonetwork materials

Optical excitations in hexagonal nanonetwork materials, for example, Boron-Nitride (BN) sheets and nanotubes, are investigated theoretically. The bonding of BN systems is positively polarized at the B site, and is negatively polarized at the N site. There is a permanent electric dipole moment along the BN bond, whose direction is from the B site to the N site. When the exciton hopping integral is restricted to the nearest neighbors, the flat band of the exciton appears at the lowest energy. The higher optical excitations have excitation bands similar to the electronic bands of graphene planes and carbon nanotubes. The symmetry of the flat exciton band is optically forbidden, indicating that the excitons related to this band will show quite long lifetime which will cause strong luminescence properties.Comment: 4 pages; 3 figures; proceedings of "XVIth International Winterschool on Electronic Properties of Novel Materials (IWEPNM2002)