Investigation into Methods for Predicting Connection Temperatures

The mechanical response of connections in fire is largely based on material strength degradation and the interactions between the various components of the connection. In order to predict connection performance in fire, temperature profiles must initially be established in order to evaluate the material strength degradation over time. This paper examines two current methods for predicting connection temperatures: The percentage method, where connection temperatures are calculated as a percentage of the adjacent beam lower-flange, mid-span temperatures; and the lumped capacitance method, based on the lumped mass of the connection. Results from the percentage method do not correlate well with experimental results, whereas the lumped capacitance method shows much better agreement with average connection temperatures. A 3D finite element heat transfer model was also created in Abaqus, and showed good correlation with experimental results.

Behaviour of a concrete structure in a real compartment fire

In July 2006, a full-scale compartment fire was set in an existing block of flats in Dalmarnock, Glasgow, Scotland. Prior to ignition, the structure was instrumented with deflection gauges, thermocouples and strain gauges. The growth of the fire was also carefully monitored. The resulting data provided a unique record of the behaviour of a concrete structure in fire through a heating–cooling cycle. The results show significant variation in structural temperatures within a relatively small compartment, demonstrating that the assumption of uniform temperature at any level within a fire compartment, which is implicit in many simple design fires, is incorrect. The response of the structure showed a corresponding complexity due to the combination of non-uniform spatial and temporal heating and the structural boundary conditions. </jats:p

Ultimate behavior of idealized composite floor elements at ambient and elevated temperature

This paper is concerned with the ultimate behavior of composite floor slabs under extreme loading situations resembling those occurring during severe building fires. The study focuses on the failure state associated with rupture of the reinforcement in idealized slab elements, which become lightly reinforced in a fire situation due to the early loss of the steel deck. The paper describes a fundamental approach for assessing the failure limit associated with reinforcement fracture in lightly reinforced beams, representing idealized slab strips. A description of the ambient-temperature tests on isolated restrained elements, carried out to assess the influence of key material parameters on the failure conditions, is firstly presented. The results of a series of material tests, undertaken mainly to examine the effect of elevated temperature on ductility, are also described. A simplified analytical model is employed, in conjunction with the experimental findings, to assess the salient material parameters and their implications on the ultimate response at both ambient and elevated temperature. © 2009 Springer Science+Business Media, LLC

Innovative learning at The University of Edinburgh

The activities available to civil engineering students during the University of Edinburgh's innovative learning week in 2012 were examined. The academic staff proposed a wide range of possible activities and student participation was optional. Popular activities were those with a ‘hands-on’ element: making or doing something. The practical activities offered included designing and building trebuchets, relaying railway permanent way on a heritage railway, practical workshops on engineering in international development and learning to juggle. These activities suggested that heuristic learning by trial and error was likely to enhance the visualisation skills that contribute to good engineering design. Further, the linking of achievement to purposeful practice rather than innate talent could inform teaching methods in the future. They also showed that in some cases safety culture messages were still not fully assimilated by students

A moisture-dependent thermomechanical constitutive model for concrete subjected to transient high temperatures

This paper presents a constitutive model for concrete able to capture the effects of the moisture content of the material on its mechanical behaviour under compressive loads and high transient temperatures. The model is the first to account for the experimentally demonstrated effect of moisture content on the two components of thermal strain, Load Induced Thermal Strain (LITS) and Free Thermal Strain (FTS). Both LITS and FTS are formulated as functions of the water content of the material at the beginning of the thermal transient. First, the theoretical formulation and numerical implementation of the model are presented. Then, the model is verified and validated against published transient tests on concrete specimens having different initial moisture contents. Finally, it is employed to assess a nuclear pressure vessel subjected to fault conditions. The results show that the model allows the moisture dependent behaviour of concrete heated under mechanical load to be accurately captured. Furthermore, it is shown the introduction of moisture-dependent thermal strain components is crucial to capture the behaviour of nuclear pressure vessels subjected to fault conditions. If the moisture-dependency of thermal strain of concrete is not considered, non-conservative results may be obtained

High-dose oral vitamin D supplementation and mortality in people aged 65-84 years: the VIDAL cluster feasibility RCT of open versus double-blind individual randomisation.

BACKGROUND: Randomised controlled trials demonstrating improved longevity are needed to justify high-dose vitamin D supplementation for older populations. OBJECTIVES: To demonstrate the feasibility of a large trial (n ≈ 20,000) of high-dose vitamin D in people aged 65-84 years through general practitioner (GP) practices, and to cluster randomise participating practices between open-label and double-blind randomisation to compare effects on recruitment, compliance and contamination. DESIGN: Twenty GP practices were randomised in matched pairs between open-label and double-blind allocation. Within each practice, patients were individually randomised to vitamin D or control (i.e. no treatment or placebo). Participants were invited to attend their GP practice to provide a blood sample and complete a lifestyle questionnaire at recruitment and again at 2 years. Randomisation by telephone followed receipt of a serum corrected calcium assay confirming eligibility ( 400 IU vitamin D per day at 2 years was 5.0% in open practices and 4.8% in double-blind practices. Mean serum 25(OH)D concentration was 51.5 nmol/l [95% confidence interval (CI) 50.2 to 52.8 nmol/l] with 82.6% of participants < 75 nmol/l at baseline. At 2 years, this increased to 109.6 nmol/l (95% CI 107.1 to 112.1 nmol/l) with 12.0% < 75 nmol/l in those allocated to vitamin D and was unaltered at 51.8 nmol/l (95% CI 49.8 to 53.8 nmol/l) in those allocated to no vitamin D (no treatment or placebo). CONCLUSIONS: A trial could recruit 20,000 participants aged 65-84 years through 200 GP practices over 2 years. Approximately 80% would be expected to adhere to allocated treatment (vitamin D or placebo) for 5 years. The trial could be conducted entirely by e-mail in participants aged < 80 years, but some participants aged 80-84 years would require postal follow-up. Recruitment and treatment compliance would be similar and contamination (self-administration of vitamin D) would be minimal, whether control participants are randomised openly to no treatment with no contact during the trial or randomised double-blind to placebo with monthly reminders. TRIAL REGISTRATION: Current Controlled Trials ISRCTN46328341 and EudraCT database 2011-003699-34. FUNDING: This project was funded by the National Institute for Health Research Health Technology Assessment programme and will be published in full in Health Technology Assessment; Vol. 24, No. 10. See the NIHR Journals Library website for further project information

Vitamin D and subsequent all-age and premature mortality: a systematic review

&lt;br&gt;Background: All-cause mortality in the population &#60; 65 years is 30% higher in Glasgow than in equally deprived Liverpool and Manchester. We investigated a hypothesis that low vitamin D in this population may be associated with premature mortality via a systematic review and meta-analysis.&lt;/br&gt; &lt;br&gt;Methods: Medline, EMBASE, Web of Science, the Cochrane Library and grey literature sources were searched until February 2012 for relevant studies. Summary statistics were combined in an age-stratified meta-analysis.&lt;/br&gt; &lt;br&gt;Results: Nine studies were included in the meta-analysis, representing 24,297 participants, 5,324 of whom died during follow-up. The pooled hazard ratio for low compared to high vitamin D demonstrated a significant inverse association (HR 1.19, 95% CI 1.12-1.27) between vitamin D levels and all-cause mortality after adjustment for available confounders. In an age-stratified meta-analysis, the hazard ratio for older participants was 1.25 (95% CI 1.14-1.36) and for younger participants 1.12 (95% CI 1.01-1.24).&lt;/br&gt; &lt;br&gt;Conclusions: Low vitamin D status is inversely associated with all-cause mortality but the risk is higher amongst older individuals and the relationship is prone to residual confounding. Further studies investigating the association between vitamin D deficiency and all-cause mortality in younger adults with adjustment for all important confounders (or using randomised trials of supplementation) are required to clarify this relationship.&lt;/br&gt

Actinic Skin Damage and Mortality - the First National Health and Nutrition Examination Survey Epidemiologic Follow-up Study

BACKGROUND: Exposure to sunlight may decrease the risk of several diseases through the synthesis of vitamin D, whereas solar radiation is the main cause of some skin and eye diseases. However, to the best of our knowledge, the association of sun-induced skin damage with mortality remains unknown. METHODOLOGY/PRINCIPAL FINDINGS: Subjects were 8472 white participants aged 25-74 years in the First National Health and Nutrition Examination Survey Epidemiologic Follow-up Study. Cardiovascular disease mortality, cancer mortality, and all-cause mortality were obtained by either a death certificate or a proxy interview, or both. Actinic skin damage was examined and recorded by the presence and severity (absent, minimal, moderate, or severe) of overall actinic skin damage and its components (i.e., fine telangiectasia, solar elastosis, and actinic keratoses). Cox regression and Kaplan-Meier methods were applied to explore the associations. A total of 672 cancer deaths, 1500 cardiovascular disease deaths, and 2969 deaths from all causes were documented through the follow-up between 1971 and 1992. After controlling for potential confounding variables, severe overall actinic skin damage was associated with a 45% higher risk for all-cause mortality (95% CI: 1.22, 1.72; P<0.001), moderate overall skin damage with a 20% higher risk (95% CI: 1.08., 1.32; P<0.001), and minimal overall skin damage with no significant mortality difference, when compared to those with no skin damage. Similar results were obtained for all-cause mortality with fine telangiectasia, solar elastosis, and actinic keratoses. The results were similar for cancer and cardiovascular disease mortality. CONCLUSIONS: The present study gives an indication of an association of actinic skin damage with cardiovascular disease, cancer and all-cause mortality in white subjects. Given the lack of support in the scientific literature and potential unmeasured confounding factors, this finding should be interpreted with caution. More independent studies are needed before any practical recommendations can be made