A comparison of local phosphorescence detection and fluid dynamic gauging methods for studying the removal of cohesive fouling layers: Effect of layer roughness

The performance of industrial cleaning in place (CIP) procedures is critically important for food manufacture. CIP has yet to be optimised for many processes, in part since the mechanisms involved in cleaning are not fully understood. Laboratory tests have an important role in guiding industrial trials, and this paper introduces and compares two experimental techniques developed for studying CIP mechanisms: local phosphorescence detection (LPD), and scanning fluid dynamic gauging (sFDG). To illustrate the comparison, each technique is used to investigate the influence of soil topology on the cleaning of pre-gelatinised starch-based layers from 316 stainless steel substrates by aqueous NaOH solutions at ambient temperature. The roughness of the soil surface is varied by incorporating zinc sulphide particles with different particle size distributions (range 1 - 80 μm) into the starch suspensions. The soil roughness increased with the use of larger particles, increasing the 3D arithmetic mean roughness (Sa) of the dry layers (range 0.37 - 3.33 μm). Rough layers were cleaned more readily than those containing small inclusions, with a good correlation between the cleaning rates observed during LPD and FDG measurements. The LPD technique, which is an instrumented CIP test, gives a better indication of the cleaning time, while sFDG measurements provide further insight into the removal mechanisms.NOTICE: this is the author's version of a work that was accepted for publication in Food Bioproducts Processing. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Food Bioproducts Proc., 92, 46-53 DOI http://dx.doi.org/10.1016/j.fbp.2013.07.01

Thick de Sitter 3-Branes, Dynamic Black Holes and Localization of Gravity

The embedding of a thick de Sitter 3-brane into a five-dimensional bulk is studied, assuming a scalar field with potential is present in the bulk. A class of solutions is found in closed form that can represent a thick de Sitter 3-brane interpolating either between two dynamical black holes with a $R \times S_{4}$ topology or between two Rindler-like spacetimes with a $R_{2}\times S_{3}$ topology. The gravitational field is localized in a small region near the center of the 3-brane. The analysis of graviton fluctuations shows that a zero mode exists and separates itself from a set of continuous modes by a mass gap. The existence of such a mass gap is shown to be universal. The scalar perturbations are also studied and shown to be stable.Comment: the study of scalar perturbations and some relevant references have been added. The most used definition for mass in de Sitter space has been adopte