From childhood to parenthood : continuity of risk over time and contextual factors perpetuating the inter-generational transfer of risk

The present investigation, comprised of two studies, has as its goal the examination of the continuity of risk over time and across generations associated with aggression and social withdrawal in childhood. More specifically, contextual factors related to financial disadvantage namely, low educational attainment, inadequate social support, and poor quality home environment were considered markers of continued risk as well as pathways to risk transfer. Each of the studies involved a subset of the participants from the Concordia Longitudinal Risk Project. In 1977, children from an inner city area, then aged 7, 10, and 13, were classified along the dimensions of aggression and social withdrawal, based on peer nominations. More than 20 years later, original participants, now parents, were evaluated. The focus of Study 1 was on the pathways to parenting and outcomes for a second generation in a group of women with young children ( n = 112). Study 2 involved an examination of the threats to adequate parenting including high school dropout, early parenthood, and poverty through replication and expansion of work by Serbin and colleagues (1998) with a sample of fathers ( n = 164). Results of both studies indicate intra- and inter-generational continuity, particularly for aggression. Social withdrawal is also found to be a risk factor; however, its role is more indirect, operating primarily through low educational attainment. Finally, within the context of parenthood, poverty and its concomitants are found to be important manifestations of continued risk as well as pathways towards the transfer of risk to a second generation. And while indirect pathways through contextual parenthood variables are found to be important, the direct link observed between parental childhood aggression and negative outcomes in both the cognitive and behavioural domains for offspring is striking. The present findings are discussed in terms of implications for intervention and social policy

Conformal Tightness of Holographic Scaling in Black Hole Thermodynamics

The near-horizon conformal symmetry of nonextremal black holes is shown to be a mandatory ingredient for the holographic scaling of the scalar-field contribution to the black hole entropy. This conformal tightness is revealed by semiclassical first-principle scaling arguments through an analysis of the multiplicative factors in the entropy due to the radial and angular degrees of freedom associated with a scalar field. Specifically, the conformal SO(2,1) invariance of the radial degree of freedom conspires with the area proportionality of the angular momentum sums to yield a robust holographic outcome.Comment: 23 pages, 1 figure. v2 & v3: expanded explanations and proofs, references added, typos corrected; v3: published versio

Proximal Gastrojejunal Reconstruction after Pancreaticoduodenal Resection

Introduction. Reconstruction by proximal gastrojejunostomy, and distal biliary and pancreatic anastomoses is infrequently used after resection of the head of the pancreas because of fear of fistulas and cholangitis. Pancreaticoduodenectomy is being performed more frequently for cystic malignant and premalignant lesions. Because of this there is a need for endoscopic visualization and biopsy of the residual pancreatic duct, since multi-centricity is characteristic of some of these malignancies. Since endoscopic access of the bile duct and pancreatic duct is difficult and unsuccessful in 50–70% after B II or Roux Y reconstruction, we prospectively studied the merit and complications (early and late) of proximal gastrojejunal (PGJ) reconstruction after pancreaticoduodenal resection. Material and Methods. Thirty nine consecutive, non-radomized patients underwent pancreaticoduodenectomy and PGJ reconstruction over 14 mos. There were 21 males and 18 females. Results. 7 patients with IPMN have undergone repeat CT scanning for surveillance, with 3 requiring repeat EUS and ERCP. There were no technical difficulties accessing the pancreas or the pancreatic duct, supporting the PGJ reconstruction. Conclusion. Proximal gastrojejunal reconstruction following pancreaticoduodenal resection may be safely done with similar morbidity to traditional pancreaticojejunal reconstructions. PGJ reconstruction may be of greater value when direct visual access to the bile duct or pancreatic duct is necessary, and should be considered when doing resection for mucinous cysts or IPMN of the head of the pancreas

Alternative reconstruction after pancreaticoduodenectomy

<p>Abstract</p> <p>Background</p> <p>Pancreaticoduodenectomy is the procedure of choice for tumors of the head of the pancreas and periampulla. Despite advances in surgical technique and postoperative care, the procedure continues to carry a high morbidity rate. One of the most common morbidities is delayed gastric emptying with rates of 15%–40%. Following two prolonged cases of delayed gastric emptying, we altered our reconstruction to avoid this complication altogether. Subsequently, our patients underwent a classic pancreaticoduodenectomy with an undivided <it>Roux-en-Y </it>technique for reconstruction.</p> <p>Methods</p> <p>We reviewed the charts of our last 13 Whipple procedures evaluating them for complications, specifically delayed gastric emptying. We compared the outcomes of those patients to a control group of 15 patients who underwent the Whipple procedure with standard reconstruction.</p> <p>Results</p> <p>No instances of delayed gastric emptying occurred in patients who underwent an undivided <it>Roux-en-Y </it>technique for reconstruction. There was 1 wound infection (8%), 1 instance of pneumonia (8%), and 1 instance of bleeding from the gastrojejunal staple line (8%). There was no operative mortality.</p> <p>Conclusion</p> <p>Use of the undivided <it>Roux-en-Y </it>technique for reconstruction following the Whipple procedure may decrease the incidence of delayed gastric emptying. In addition, it has the added benefit of eliminating bile reflux gastritis. Future randomized control trials are recommended to further evaluate the efficacy of the procedure.</p

A new in vitro assay measuring direct interaction of nonsense suppressors with the eukaryotic protein synthesis machinery [preprint]

Nonsense suppressors (NonSups) treat premature termination codon (PTC) disorders by inducing the selection of near cognate tRNAs at the PTC position, allowing readthrough of the PTC and production of full-length protein. Studies of NonSup-induced readthrough of eukaryotic PTCs have been carried out using animals, cells or crude cell extracts. In these studies, NonSups can promote readthrough directly, by binding to components of the protein synthesis machinery, or indirectly, by inhibiting nonsense-mediated mRNA decay or by other mechanisms. Here we utilize a highly-purified in vitro system (Zhang et al., 2016. eLife 5: e13429) to measure exclusively direct NonSup-induced readthrough. Of 17 previously identified NonSups, 13 display direct effects, apparently via at least two different mechanisms. We can monitor such direct effects by single molecule FRET (smFRET). Future smFRET experiments will permit elucidation of the mechanisms by which NonSups stimulate direct readthrough, aiding ongoing efforts to improve the clinical usefulness of NonSups

Mediastinal extension of a complicated pancreatic pseudocyst; a case report and literature review

BACKGROUND: Mediastinal pancreatic pseudocyst is a rare complication of acute or chronic pancreatitis. CASE PRESENTATION: This case report describes the management of a difficult case of pancreatic pseudocyst with a mediastinal extension in a patient having chronic pancreatitis. Different management strategies were used until complete resolution of this complex pseudocyst occurred using open surgical cystogastrostomy. CONCLUSION: Despite the availablity of different minimally invasive techniques to treat pancreatic pseudocysts, management of complex mediastinal pseudocyst may still require open surgical drainage procedures

Designing a global assessment of climate change on inland fishes and fisheries: knowns and needs

© 2017, Springer International Publishing Switzerland (outside the USA). To date, there are few comprehensive assessments of how climate change affects inland finfish, fisheries, and aquaculture at a global scale, but one is necessary to identify research needs and commonalities across regions and to help guide decision making and funding priorities. Broadly, the consequences of climate change on inland fishes will impact global food security, the livelihoods of people who depend on inland capture and recreational fisheries. However, understanding how climate change will affect inland fishes and fisheries has lagged behind marine assessments. Building from a North American inland fisheries assessment, we convened an expert panel from seven countries to provide a first-step to a framework for determining how to approach an assessment of how climate change may affect inland fishes, capture fisheries, and aquaculture globally. Starting with the small group helped frame the key questions (e.g., who is the audience? What is the best approach and spatial scale?). Data gaps identified by the group include: the tolerances of inland fisheries to changes in temperature, stream flows, salinity, and other environmental factors linked to climate change, and the adaptive capacity of fishes and fisheries to adjust to these changes. These questions are difficult to address, but long-term and large-scale datasets are becoming more readily available as a means to test hypotheses related to climate change. We hope this perspective will help researchers and decision makers identify research priorities and provide a framework to help sustain inland fish populations and fisheries for the diversity of users around the globe

A multi-year heavy metal analysis of 72 dark chocolate and cocoa products in the USA

IntroductionContamination of cocoa containing products, such as dark chocolate, with heavy metals including lead, cadmium and arsenic has been reported in the US. However, a formal exploration into the significance of this contamination, nor multi-year trends in the degree or scope remain unresolved.MethodsFrom 2014 to 2022, 72 consumer cocoa-containing products were purchased and analyzed for heavy metal contamination with lead (Pb), cadmium (Cd), and arsenic (As) in 4 distinct cohorts (2014, 2016, 2019, 2022). The thresholds used to assess heavy metal contamination were set to Prop 65 maximum allowable dose levels (MADLs) of 0.5 mcg/day, 4.1 mcg/day, 10 mcg/day for Pb, Cd, and As, respectively.Results and discussionOur analysis reports that 43, 35, and 0% of the products tested exceed Prop 65 MADLs for heavy metal concentrations, respectively, of Pb, Cd, and As, while 97.2% (70 of 72) fall below US FDA IRL limits established for Pb. Median concentrations of each metal tested were lower than even the conservative Prop 65 MADLs, indicating a potentially large effect of product outliers. This indicates that heavy metal contamination—in more than half of products tested—may not pose any appreciable risk for the average person when consumed as a single serving; however, consuming some of the products tested, or more than one serving per day in combination with non-cocoa derived sources heavy metals, may add up to exposure that would exceed the Prop 65 MADLs. Notably, “organic” products were significantly more likely to demonstrate higher levels of both Cd and Pb

GEANT4 : a simulation toolkit

Abstract Geant4 is a toolkit for simulating the passage of particles through matter. It includes a complete range of functionality including tracking, geometry, physics models and hits. The physics processes offered cover a comprehensive range, including electromagnetic, hadronic and optical processes, a large set of long-lived particles, materials and elements, over a wide energy range starting, in some cases, from 250 eV and extending in others to the TeV energy range. It has been designed and constructed to expose the physics models utilised, to handle complex geometries, and to enable its easy adaptation for optimal use in different sets of applications. The toolkit is the result of a worldwide collaboration of physicists and software engineers. It has been created exploiting software engineering and object-oriented technology and implemented in the C++ programming language. It has been used in applications in particle physics, nuclear physics, accelerator design, space engineering and medical physics. PACS: 07.05.Tp; 13; 2