Fully electrified heat pump assisted distillation process by flash vapour circulation

In industrial processes there are instances where heat pump assisted distillation falls short of full electrification, necessitating an auxiliary reboiler. To solve this limiting issue, this short communication proposes a new method using flash vapour circulation (FVC) to recuperate the waste heat within the heat pump cycle. This method incorporates a flash drum after the throttling valve to generate flash vapour. Rather than employing an auxiliary cooler for condensing the mixed vapour-liquid in a conventional heat pump system, the produced flash vapour is circulated back to the compressor inlet to enhance the recycled heat in the reboiler. With proper energy match, this approach has the potential to realise full electrification of distillation. The distillation of methanol/water serves as an illustrative case study, showcasing the viability of FVC which allows additional 22% energy savings, as compared to mechanical vapour recompression. Yet, this strategy may not be advantageous if the waste heat is already maximally utilised in preheating both the compressor and column inlet feed. The separation of tetrahydrofuran/water is used as case study to demonstrate the limitations of this approach.ChemE/Product and Process EngineeringChemE/Process Systems Engineerin

In-situ damage mechanism investigation and a prediction model for delamination with fibre bridging in composites

Carbon-fibre reinforced composites are susceptible to delamination. Fibre bridging is an important shielding mechanism frequently observed in delamination. The presence of these bridging fibres can significantly increase interlaminar resistance, making it critical to represent this phenomenon for delamination characterization in composite laminates. To this end, in-situ SEM examinations were carried out to thoroughly explore damage mechanisms around delamination front as well as in bridging fibres. It was found that micro-cracks initiated at fibre–matrix interface can gradually develop and coalesce into micro-delaminations ahead of the main crack. The accumulation of these micro-delaminations can finally cause macro delamination propagation. The performance of bridging fibres can be summarized as three typical stages, i.e. bending, fibre–matrix peeling and final breakage with crack opening. Subsequently, theoretical discussions on bridging stress distribution were conducted in accordance with these bridging mechanism examinations, contributing to a new traction-separation constitutive to represent fibre bridging performance. A FEA prediction model was finally developed to characterize delamination behavior with fibre bridging. The simulation results can agree well with the experimental data in the entire delamination, demonstrating its effectiveness in fibre-bridged delamination representation. This study also demonstrated the importance of having in-depth understanding on fibre bridging mechanisms to appropriately represent bridging performance during delamination growth in composite laminates.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Structural Integrity & Composite