The mechanical properties at room and low temperature of P110 steel characterised by means of small punch test

In this paper small punch test (SPT) which is one of miniaturized samples technique, was employed to characterize the mechanical properties of carbon steel P110. The tests were carried out in the range of -175°C to RT. Results obtained for SPT were compared to those calculated for tensile and Charpy impact test. Based on tensile and SPT parameters numerical model was prepared. 8 mm in diameter and 0.8 mm in height (t) discs with and without notch were employed in this research. The specimens had different depth notch (a) in the range of 0.1 to 0.4 mm. It was estimated that α factor for comparison of Tsp and DBTT for carbon steel P110 is 0.55 and the linear relation is DBTT = 0.55TSPT. The numerical model fit with force – deflection curve of SPT. If the factor of notch depth and samples thickness is higher than 0.3 the fracture mode is transformed from ductile to brittle at -150°C

Advances in anisotropy of plastic behaviour and formability of sheet metals

This paper reviews the most recent models for description of the anisotropic plastic behavior and formability of sheet metals. After a brief review of classic isotropic yield functions, recent advanced anisotropic criteria for polycrystalline materials of various crystal structures and their applications to cup drawing are presented. Next, the discussion focuses on novel formulations of anisotropic hardening. A brief review of the experimental methods used for characterizing and modeling the anisotropic plastic behavior of metallic sheets and tubes under biaxial loading is presented. The experimental methods and theoretical models used for measuring and predicting the limit strains, development of new tests for determining the Forming Limit Curves (FLC), as well as on studying the influence of various material or process parameters on the limit strains are presented.11Nsciescopu