The Influence of the Packing Factor on the Fuel Temperature Hot Spots in a Particle-Bed GCFR

In the recent past the so-called GCFR has been again a subject of study by the international scientific community. This type of reactors, although still in a preliminary stage of development, is a very interesting perspective because combines the positive characteristics common to all the fast reactors with those of the reactors cooled by helium. Up to now, almost all the analyses on the GCFR thermodynamic aspects have been performed starting from a "global" point of view: generally the core has been modelled as a porous medium and only the global parameters have been taken into account. The local effects have been included inadhoccorrective peak factors. The analyses carried out in the present research will be devoted to the characterization of the local effects, on a microscopic scale. In order to have reliable "global" nuclear and thermal-fluid-dynamic data, the performed analyses will be based on simulations previously performed using the RELAP5-3D code, assuming as input parameters the ETDR core ones. For each considered case, the variation ranges of the evaluated parameters have been estimated on the basis of the "best" and the "worst" cases. To summarize the obtained results, even in transient conditions, the variations of the considered input parameters are less significant for the local output values if compared to those due to the assumed packing factor. As a consequence, in a more general core calculation, the obtained local temperature (and velocity) values will have to be corrected by a proper factor that would have to take into account the results of this research

Myrrha primary heat exchanger tube rupture: Phenomenology and evolution

In the framework of MYRRHA Project, a pool-type experimental and material testing irradiation facility operated with Lead Bismuth Eutectic (LBE) coolant and able to operate in both sub-critical and critical mode is designed to be built in Mol, Belgium, in SCK\u2022CEN domain. In addition to the material testing function, targets of the MYRRHA reactor are to prove the feasibility of the ADS technology as Minor Actinides (MAs) burner and to act as a demonstrative plant for future Gen-IV heavy metal cooled reactors. SCK\u2022CEN entered the pre-licensing phase for the MYRRHA reactor. In order to provide the safety authority all the required data, a complete safety analysis must be performed, studying the transients defined by the list of postulating initiating events. In particular, an accident with potential serious consequences is the Primary Heat Exchanger Tube Rupture (PHXTR), involving the sudden release of single phase or two-phase water from a tube break in a hot liquid metal pool. This accident evolution is strongly characterized by the design of the MYRRHA Primary Heat eXchanger (PHX) and its direct surroundings in the reactor vessel and by the thermal-hydraulical conditions of the MYRRHA primary and secondary cooling system. In the first phase of a PHXTR accident, the water in the Secondary Cooling System (SCS) is released in the Primary System (PS) pool in regime of choked flow due to the pressure difference. Being the water released in an overheated, low-pressure environment, a flashing with potential sudden specific volume increase is expected. The heat transfer phenomena leading to the phase change velocity depend by the actual number of bubbles released in the hot liquid metal pool, function of the actual break size and shape. Its characterization is important for the definition of the overall specific volume increase and for the estimation of the water mass fraction redirected through the Primary Pump in the reactor Lower Plenum, with the risk of void insertion in the core and consequent reactivity excursion. A simplified calculation model to evaluate the history of any given bubble distribution generated by any water flow rate through any break has been set up. The main purpose is to describe the evolution of the main system state variables during the accidental event, by checking the potential insurgency of any reactor safety issue due to pressure peaks or core void insertions

A Critical Review of the Recent Improvements in Minimizing Nuclear Waste by Innovative Gas-Cooled Reactors

This paper presents a critical review of the recent improvements in minimizing nuclear waste in terms of quantities, long-term activities, and radiotoxicities by innovative GCRs, with particular emphasis to the results obtained at the University of Pisa. Regarding these last items, in the frame of some EU projects (GCFR, PUMA, and RAPHAEL), we analyzed symbiotic fuel cycles coupling current LWRs with HTRs, finally closing the cycle by GCFRs. Particularly, we analyzed fertile-free and Pu-Th-based fuel in HTR: we improved plutonium exploitation also by optimizing Pu/Th ratios in the fuel loaded in an HTR. Then, we chose GCFRs to burn residual MA. We have started the calculations on simplified models, but we ended them using more "realistic" models of the reactors. In addition, we have added the GCFR multiple recycling option usingkeffcalculations for all the reactors. As a conclusion, we can state that, coupling HTR with GCFR, the geological disposal issues concerning high-level radiotoxicity of MA can be considerably reduced

The use of Th in HTR: State of the art and implementation in Th/Pu fuel cycles

Nowadays nuclear is the only greenhouse-free source that can appreciably respond to the increasing worldwide energy demand. The use of Thorium in the nuclear energy production may offer some advantages to accomplish this task. Extensive R&D on the thorium fuel cycle has been conducted in many countries around the world. Starting from the current nuclear waste policy, the EU-PUMA project focuses on the potential benefits of using the HTR core as a Pu/MA transmuter. In this paper the following aspects have been analysed: (1) the state-of-the-art of the studies on the use of Th in different reactors, (2) the use of Th in HTRs, with a particular emphasis on Th-Pu fuel cycles, (3) an original assessment of Th-Pu fuel cycles in HTR. Some aspects related to Thorium exploitation were outlined, particularly its suitability for working in pebble-bed HTR in a Th-Pu fuel cycle. The influence of the Th/Pu weight fraction at BOC in a typical HTR pebble was analysed as far as the reactivity trend versus burn-up, the energy produced per Pu mass, and the Pu isotopic composition at EOC are concerned. Although deeper investigations need to be performed in order to draw final conclusions, it is possible to state that some optimized Th percentage in the initial Pu/Th fuel could be suggested on the basis of the aim we are trying to reach

An algebraic classification of entangled states

We provide a classification of entangled states that uses new discrete entanglement invariants. The invariants are defined by algebraic properties of linear maps associated with the states. We prove a theorem on a correspondence between the invariants and sets of equivalent classes of entangled states. The new method works for an arbitrary finite number of finite-dimensional state subspaces. As an application of the method, we considered a large selection of cases of three subspaces of various dimensions. We also obtain an entanglement classification of four qubits, where we find 27 fundamental sets of classes.Comment: published versio

New infrastructure for studies of transmutation and fast systems concepts

In this work we report initial studies on a low power Accelerator-Driven System as a possible experimental facility for the measurement of relevant integral nuclear quantities. In particular, we performed Monte Carlo simulations of minor actinides and fission products irradiation and estimated the fission rate within fission chambers in the reactor core and the reflector, in order to evaluate the transmutation rates and the measurement sensitivity. We also performed a photo-peak analysis of available experimental data from a research reactor, in order to estimate the expected sensitivity of this analysis method on the irradiation of samples in the ADS considered

RFP-MSR Hybrid Reactor Model for Tritium Breeding and Actinides Transmutation †

The studies on the development of fusion-fission hybrid reactors (FFHR) have gained consensus in recent years as an intermediate step before fusion energy. This work proposes a possible approach to FFHRs based on the coupling of a Reversed Field Pinch fusion machine and a Molten Salt Subcritical fission test bed. The proposed test bed is characterized by the coexistence of a fast-neutron fission core and a dedicated thermal-neutron zone, allowing the performing of tritium breeding and actinides transmutation studies. The neutronic design solutions and the results obtained by the irradiation of FLiBe salt (inside the thermal-neutron zone) and of an actinide target (inside the core) are shown. The outcomes of the analysis reveal the potential of FFHR systems as breeding/burner systems. In particular, the results regarding tritium breeding are very encouraging as the system is demonstrated to be able to reach a very high Tritium Breeding Ratio

Bio-based benzoxazines synthesized in a deep eutectic solvent: A greener approach toward vesicular nanosystems

A green synthesis of benzoxazines, based upon reaction of cardanol with formaldehyde and primary amines, is achieved in high yields using choline chloride-urea mixture as deep eutectic solvent. Then, it is demonstrated how the cardanol-based benxoxazines can be employed as only component for the preparation of a nanovesicular systems

Combining electrodermal activity analysis and dynamic causal modeling to investigate the visual-odor multimodal integration during face perception

Objective. This study presents a novel methodological approach for incorporating information related to the peripheral sympathetic response into the investigation of neural dynamics. Particularly, we explore how hedonic contextual olfactory stimuli influence the processing of neutral faces in terms of sympathetic response, event-related potentials and effective connectivity analysis. The objective is to investigate how the emotional valence of odors influences the cortical connectivity underlying face processing and the role of face-induced sympathetic arousal in this visual-olfactory multimodal integration. Approach. To this aim, we combine electrodermal activity (EDA) analysis and dynamic causal modeling to examine changes in cortico-cortical interactions. Results. The results reveal that stimuli arising sympathetic EDA responses are associated with a more negative N170 amplitude, which may be a marker of heightened arousal in response to faces. Hedonic odors, on the other hand, lead to a more negative N1 component and a reduced the vertex positive potential when they are unpleasant or pleasant. Concerning connectivity, unpleasant odors strengthen the forward connection from the inferior temporal gyrus (ITG) to the middle temporal gyrus, which is involved in processing changeable facial features. Conversely, the occurrence of sympathetic responses after a stimulus is correlated with an inhibition of this same connection and an enhancement of the backward connection from ITG to the fusiform face gyrus. Significance. These findings suggest that unpleasant odors may enhance the interpretation of emotional expressions and mental states, while faces capable of eliciting sympathetic arousal prioritize identity processing

Determination of carbonyl compounds in exhaled breath by on-sorbent derivatization coupled with thermal desorption and gas chromatography-tandem mass spectrometry

A reliable method for the determination of carbonyl compounds in exhaled breath based on on-sorbent derivatization coupled with thermal desorption and gas chromatography-tandem mass spectrometry is described. The analytical performances were optimized for a mixture of C2-C9 aldehydes and C3-C9 ketones, particularly interesting for clinical applications, by using an internal standard and applying a 2^3 full factorial design. A volume of sample (250 ml) was loaded at 50 ml min-1 into a Tenax GR sorbent tube containing 130 nmol of O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine hydrochloride. All compounds showed a limit of detection lower than 200 pptv. The yield of the derivatization procedure was normalized by adding to the sample a known amount of 6D-acetone as an internal standard. This allowed halving the relative standard deviation to 10% and 15% for the mono-and di-carbonyl compounds, respectively, thus improving reliability. The optimized method was applied to the determination of carbonyl compounds in 12 breath samples collected from four patients suffering from heart failure during hospitalization