Collective excitation spectrum of a disordered Hubbard model

We study the collective excitation spectrum of a d=3 site-disordered Anderson-Hubbard model at half-filling, via a random-phase approximation (RPA) about broken-symmetry, inhomogeneous unrestricted Hartree-Fock (UHF) ground states. We focus in particular on the density and character of low-frequency collective excitations in the transverse spin channel. In the absence of disorder, these are found to be spin-wave-like for all but very weak interaction strengths, extending down to zero frequency and separated from a Stoner-like band, to which there is a gap. With disorder present, a prominent spin-wave-like band is found to persist over a wide region of the disorder-interaction phase plane in which the mean-field ground state is a disordered antiferromagnet, despite the closure of the UHF single-particle gap. Site resolution of the RPA excitations leads to a microscopic rationalization of the evolution of the spectrum with disorder and interaction strength, and enables the observed localization properties to be interpreted in terms of the fraction of strong local moments and their site-differential distribution.Comment: 25 pages (revtex), 9 postscript figure

Novel use of stir bar sorptive extraction (SBSE) as a tool for isolation of oviposition site attractants for gravid Culex quinquefasciatus

Mosquitoes such as Culex quinquefasciatus Say (Diptera: Culicidae) are important vectors of organisms that cause disease in humans. Research into the development of effective standardized odour baits for blood-fed females (oviposition attractants), to enable entomological monitoring of vector populations, is hampered by complex protocols for extraction of physiologically active volatile chemicals from natural breeding site water samples, which have produced inconsistent results. Air entrainment and solvent extraction are technically demanding methods and are impractical for use in resource poor environments where mosquito-borne disease is most prevalent. This study reports the first use of a simple, robust extraction technique, stir bar sorptive extraction (SBSE), to extract behaviourally active small lipophilic molecules (SLMs) present in water samples collected from Cx. quinquefasciatus breeding sites in Tanzania. Extracts from a pit latrine and from a cess pool breeding site attracted more gravid Cx. quinquefasciatus in pair choice bioassays than control extracts, and coupled gas chromatography-electroantennography (GC-EAG) allowed tentative identification of 15 electrophysiologically active chemicals, including the known oviposition attractant, skatole (3-methylindole). Here, we have demonstrated, using simple pair choice bioassays in controlled laboratory conditions, that SBSE is effective for the extraction of behaviourally and electrophysiologically active semiochemicals from mosquito breeding site waters. Further research is required to confirm that SBSE is an appropriate technique for use in field surveys in the search for oviposition cues for Cx. quinquefasciatus

Insulating phases of the infinite-dimensional Hubbard model

A theory is developed for the T=0 Mott-Hubbard insulating phases of the infinite-dimensional Hubbard model at half-filling, including both the antiferromagnetic (AF) and paramagnetic (P) insulators. Local moments are introduced explicitly from the outset, enabling ready identification of the dominant low energy scales for insulating spin- flip excitations. Dynamical coupling of single-particle processes to the spin-flip excitations leads to a renormalized self-consistent description of the single-particle propagators that is shown to be asymptotically exact in strong coupling, for both the AF and P phases. For the AF case, the resultant theory is applicable over the entire U-range, and is discussed in some detail. For the P phase, we consider in particular the destruction of the Mott insulator, the resultant critical behaviour of which is found to stem inherently from proper inclusion of the spin-flip excitations.Comment: 13 pages Revtex, 12 postscript figure

High intensity interval training in a real world setting: A randomized controlled feasibility study in overweight inactive adults, measuring change in maximal oxygen uptake

Background In research clinic settings, overweight adults undertaking HIIT (high intensity interval training) improve their fitness as effectively as those undertaking conventional walking programs but can do so within a shorter time spent exercising. We undertook a randomized controlled feasibility (pilot) study aimed at extending HIIT into a real world setting by recruiting overweight/obese, inactive adults into a group based activity program, held in a community park. Methods Participants were allocated into one of three groups. The two interventions, aerobic interval training and maximal volitional interval training, were compared with an active control group undertaking walking based exercise. Supervised group sessions (36 per intervention) were held outdoors. Cardiorespiratory fitness was measured using VO2max (maximal oxygen uptake, results expressed in ml/min/kg), before and after the 12 week interventions. Results On ITT (intention to treat) analyses, baseline (N = 49) and exit (N = 39) O2 was 25.3±4.5 and 25.3±3.9, respectively. Participant allocation and baseline/exit VO2max by group was as follows: Aerobic interval training N =  16, 24.2±4.8/25.6±4.8; maximal volitional interval training N = 16, 25.0±2.8/25.2±3.4; walking N = 17, 26.5±5.3/25.2±3.6. The post intervention change in VO2max was +1.01 in the aerobic interval training, −0.06 in the maximal volitional interval training and −1.03 in the walking subgroups. The aerobic interval training subgroup increased VO2max compared to walking (p = 0.03). The actual (observed, rather than prescribed) time spent exercising (minutes per week, ITT analysis) was 74 for aerobic interval training, 45 for maximal volitional interval training and 116 for walking (p =  0.001). On descriptive analysis, the walking subgroup had the fewest adverse events. Conclusions In contrast to earlier studies, the improvement in cardiorespiratory fitness in a cohort of overweight/obese participants undertaking aerobic interval training in a real world setting was modest. The most likely reason for this finding relates to reduced adherence to the exercise program, when moving beyond the research clinic setting

BpaB, a Novel Protein Encoded by the Lyme Disease Spirochete\u27s Cp32 Prophages, Binds to Erp Operator 2 DNA

Borrelia burgdorferi produces Erp outer surface proteins throughout mammalian infection, but represses their synthesis during colonization of vector ticks. A DNA region 5′ of the start of erp transcription, Operator 2, was previously shown to be essential for regulation of expression. We now report identification and characterization of a novel erp Operator 2-binding protein, which we named BpaB. erp operons are located on episomal cp32 prophages, and a single bacterium may contain as many as 10 different cp32s. Each cp32 family member encodes a unique BpaB protein, yet the three tested cp32-encoded BpaB alleles all bound to the same DNA sequence. A 20-bp region of erp Operator 2 was determined to be essential for BpaB binding, and initial protein binding to that site was required for binding of additional BpaB molecules. A 36-residue region near the BpaB carboxy terminus was found to be essential for high-affinity DNA-binding. BpaB competed for binding to erp Operator 2 with a second B. burgdorferi DNA-binding protein, EbfC. Thus, cellular levels of free BpaB and EbfC could potentially control erp transcription levels

\u3cem\u3eBorrelia burgdorferi\u3c/em\u3e EbfC Defines a Newly-Identified, Widespread Family of Bacterial DNA-Binding Proteins

The Lyme disease spirochete, Borrelia burgdorferi, encodes a novel type of DNA-binding protein named EbfC. Orthologs of EbfC are encoded by a wide range of bacterial species, so characterization of the borrelial protein has implications that span the eubacterial kingdom. The present work defines the DNA sequence required for high-affinity binding by EbfC to be the 4 bp broken palindrome GTnAC, where ‘n’ can be any nucleotide. Two high-affinity EbfC-binding sites are located immediately 5′ of B. burgdorferi erp transcriptional promoters, and binding of EbfC was found to alter the conformation of erp promoter DNA. Consensus EbfC-binding sites are abundantly distributed throughout the B. burgdorferi genome, occurring approximately once every 1 kb. These and other features of EbfC suggest that this small protein and its orthologs may represent a distinctive type of bacterial nucleoid-associated protein. EbfC was shown to bind DNA as a homodimer, and site-directed mutagenesis studies indicated that EbfC and its orthologs appear to bind DNA via a novel α-helical ‘tweezer’-like structure

BpaB, a novel protein encoded by the Lyme disease spirochete’s cp32 prophages, binds to erp Operator 2 DNA

Borrelia burgdorferi produces Erp outer surface proteins throughout mammalian infection, but represses their synthesis during colonization of vector ticks. A DNA region 5′ of the start of erp transcription, Operator 2, was previously shown to be essential for regulation of expression. We now report identification and characterization of a novel erp Operator 2-binding protein, which we named BpaB. erp operons are located on episomal cp32 prophages, and a single bacterium may contain as many as 10 different cp32s. Each cp32 family member encodes a unique BpaB protein, yet the three tested cp32-encoded BpaB alleles all bound to the same DNA sequence. A 20-bp region of erp Operator 2 was determined to be essential for BpaB binding, and initial protein binding to that site was required for binding of additional BpaB molecules. A 36-residue region near the BpaB carboxy terminus was found to be essential for high-affinity DNA-binding. BpaB competed for binding to erp Operator 2 with a second B. burgdorferi DNA-binding protein, EbfC. Thus, cellular levels of free BpaB and EbfC could potentially control erp transcription levels

High-sensitivity transition-edge-sensed bolometers: improved speed and characterization with AC and DC bias

We report on efforts to improve the speed of low-G far-infrared transition-edged-sensed bolometers. We use a fabrication process that does not require any dry etch steps to reduce heat capacity on the suspended device and measure a reduction in the detector time constant. However, we also measure an increase in the temperature-normalized thermal conductance (G), and a corresponding increase in the noise-equivalent power (NEP). We employ a new near-IR photon-noise technique using a near-IR laser to calibrate the frequency-domain multiplexed AC system and compare the results to a well-understood DC circuit. We measure an NEP white noise level of 0.8 aW/rtHz with a 1/f knee below 0.1 Hz and a time constant of 3.2 ms.Comment: 27 pages, 16 figures. This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in J. Appl. Phys. 134 (9) and may be found at https://doi.org/10.1063/5.015720