Massive measurements of 5G exposure in a town: methodology and results

We target the problem of performing a large set of measurements over the territory to characterize the exposure from a 5G deployment. Since using a single Spectrum Analyzer (SA) is not practically feasible (due to the limited battery duration), in this work we adopt an integrated approach, based on the massive measurement of 5G metrics with a 5G smartphone, followed by a detailed analysis done with the SA and an ElectroMagnetic Field (EMF) meter in selected locations. Results, obtained over a real territory covered by 5G signal, reveal that 5G exposure is overall very limited for most of measurement locations, both in terms of field strength (up to 0.7 [V/m]) and as share w.r.t. other wireless technologies (typically lower than 15%). Moreover, our approach allows easily spotting measurement outliers, e.g., due to the exploitation of Dynamic Spectrum Sharing (DSS) techniques between 4G and 5G. In addition, the exposure metrics collected with the smartphone are overall a good proxy of the total exposure measured over the whole 5G channel. Moreover, the sight conditions and the distance from 5G base station play a great role in determining the level of exposure. Finally, a maximum of 130 [W] of power radiated by a 5G base station is estimated in the scenario under consideration

Measuring EMF and Throughput Before and After 5G Service Activation in a Residential Area

The deployment of 5G networks is approaching a mature phase in many countries across the world. However, little efforts have been done so far to scientifically compare ElectroMagnetic Field (EMF) exposure and traffic levels before and after the activation of 5G service over the territory. The goal of this work is to provide a sound comparative assessment of exposure and traffic, by performing repeated measurements before and after 5G provisioning service. Our solution is based on an EMF meter and a spectrum analyzer that is remotely controlled by a measurement algorithm. In this way, we dissect the contribution of each pre-5G and 5G band radiating over the territory. In addition, we employ a traffic chain to precisely characterize the achieved throughput levels. Results, derived from a set of measurements performed on a commercial deployment, reveal that the provisioning of 5G service over mid-band frequencies has a limited impact on the exposure. In parallel, the measured traffic is more than doubled when 5G is activated over mid-bands, reaching levels above 200 [Mbps]. On the other hand, the provisioning of 5G over sub-GHz bands does not introduce a substantial increase in the traffic levels. Eventually, we demonstrate that EMF exposure is impacted by the raw-land reconfiguration to host the 5G panels, which introduces changes in the sight conditions and in the power received from the main lobes

Application of the Maximum Power Extrapolation Procedure for Human Exposure Assessment to 5G Millimeter Waves: Challenges and Possible Solutions

This paper describes an investigation on the application of the Maximum Power Extrapolation (MPE) technique on a fully operational Fixed Wireless Access (FWA) FR2-band 5G gNB. The data was acquired in [27.1-27.3] GHz band using a network scanner over nearly 10 minutes periods to allow a statistical analysis and an accurate estimation of the role of each contribution to the total uncertainty, including the fading affecting the 5G FR2 reference signal. The results show that the level of the electromagnetic field is well below the limits imposed by Italian legislation. However the goal of the paper is more fundamental, and shows an approach that can be used to identify the critical elements of the measurement set-up, suggesting where to concentrate efforts to improve the measurement procedure. In particular, the uncertainty budget highlights three contributions, (i.e. estimation of the traffic beam level, of the probe response and of the 5G FR2 reference signal) that deserve further investigations

How Much Exposure From 5G Towers Is Radiated Over Children, Teenagers, Schools and Hospitals?

The rolling-out of 5G antennas over the territory is a fundamental step to provide 5G connectivity. However, little efforts have been done so far on the exposure assessment from 5G cellular towers over young people and 'sensitive' buildings, like schools and medical centers. To face such issues, we provide a sound methodology for the numerical evaluation of 5G (and pre-5G) downlink exposure over children, teenagers, schools and medical centers. We then apply the proposed methodology over two real scenarios. Results reveal that the exposure from 5G cellular towers will increase in the forthcoming years, in parallel with the growth of the 5G adoption levels. However, the exposure levels are well below the maximum ones defined by international regulations. Moreover, the exposure over children and teenagers is similar to the one of the whole population, while the exposure over schools and medical centers can be lower than the one of the whole set of buildings. Finally, the exposure from 5G is strongly lower than the pre-5G one when the building attenuation is introduced and a maturity adoption level for 5G is assumed

Catch the Pitch of 5G FWA: EMF and Throughput Measurements of 3.5-GHz Standalone Deployment in a Baseball Stadium

The provisioning of 5G technology does not only involve mobile terminals, but also new services such as Fixed Wireless Access (FWA). The aim of this study is to examine the ElectroMagnetic Field (EMF) and throughput performance of a FWA deployment utilizing Standalone technology operating at 3.5 GHz. To address the unique characteristics of 5G FWA signals, an innovative framework has been designed based on the measurement of 5G FWA spectrum using four independent chains and an additional traffic generation chain to saturate the radio link capacity at the measurement location. Methodologies for evaluating 5G FWA exposure under conservative conditions, such as measurements of exposure during active traffic generation and maximum power extrapolations, are also introduced. Results from real measurements taken at a baseball stadium show that 5G FWA exposure is consistently low, typically below 0.4 [V/m], with an upper bound of 0.59 [V/m], while the achieved throughput is up to 250 [Mbps]. Additionally, the measured 5G exposure levels are a small fraction compared to those emitted by other technologies such as 4G. Furthermore, the values estimated by simulation from the output power counters of the base station are found to be in close agreement with the measured exposure levels

EMF Exposure in 5G Standalone mm-Wave Deployments: What Is the Impact of Downlink Traffic?

The rolling-out of 5G networks is recently including 5G Base Stations (BSs) operating on millimeter-Wave (mm-Wave) frequencies. The goal of this work is to shed light on the exposure assessment from commercial 5G mm-Wave 5G BSs, by focusing on the impact of downlink traffic on the exposure levels. To this aim, we adopt an innovative measurement framework, based on hardware and software components, able to satisfy the challenging measurement requirements of mm-Wave frequencies. In addition, we design a completely softwarized algorithm, called M-WAVE, in order to measure the mm-Wave exposure with a programmable spectrum analyzer. Results, obtained from a commercial 5G scenario, reveal that the exposure from the mm-Wave BS is directly proportional to the amount of traffic injected on the wireless link. However, the electric field is always lower than 0.08 V/m, while the downlink traffic is even larger than 800 Mbps