2,651 research outputs found
Hydrogeology and groundwater quality in the quaternary alluvial deposits of the Cuneo Plain (NW Italy)
Reliability of spring recession curve analysis as a function of the temporal resolution of the monitoring dataset
Mountain springs represent one of the largest and most precious sources of potable water in Italy, necessary to meet the water needs of the population. Optimizing the present and future management strategies of mountain groundwater resources has become increasingly necessary. The accuracy and frequency of the flow rate (Q) measurements determine and restrict the processes that can be studied using spring hydrograph and recession curve analysis. Therefore, to properly define mountain aquifers’ hydrogeological properties, it turns out important to highlight the variation of the error in the estimation of the hydrogeological parameters as the time interval of sampling varies. In this paper, recession curve analysis was performed on two different mountain springs (Spring 1 and Spring 2) of north-western Italy, firstly considering available 4-h resolution measuring data and subsequently by resampling data to simulate longer sampling intervals of 1, 3, 7, 15, and 30 days. The resulting distribution of errors introduced by longer acquisition intervals underlined how the percentage error increases with increasing acquisition interval. For obtaining an adequate estimation of mountain aquifer hydrodynamic parameters, in place of continuous hourly data, 1-day and 3-day sampling intervals with associated errors respectively lower than 5% and 10% were found to be valid
MESENCHYMAL STEM CELLS IN PH-NEGATIVE MYELOPROLIFERATIVE NEOPLASMS: IDLE OBSERVERS OR PART OF THE DISEASE?
Groundwater heat pump systems diffusion and groundwater resources protection
Geothermal Energy, being a clean and sustainable source of energy, is gaining importance worldwide due to various reasons. Geothermal power can be generated throughout the year on twenty four hour basis as it's not much dependent on ambient temperature and weather conditions. Recently there is an increased interest in exploitation of low enthalpy geothermal resources for other applications such as geothermal space heating and cooling for domestic, industrial and commercial applications.GroundWater Heat Pump systems (GWHPs) extract water from one or more wells, pass it through a heat exchanger or a heat pump, which either extracts heat from, or rejects heat, and discharge water back into the aquifer or nearby surface water.This reinjection disturbs the natural aquifer temperature, producing a local temperature anomalies (cold or heat plume) known as the thermal affected zone (TAZ).Moreover, it is important to know if the TAZ can interfere with downgradient pre-existing plants or subsurface infrastructure or with the plant itself (thermal feedback). It is then important to know, even before constructing a GWHP system, the future TAZ extent around the planned injection point.Due to these risks, the increasing number of GWHP systems enforces the need for new criteria to develop subsurface energy policies that allow planning their spatial distribution. To obtain these sustainability criteria, the results of different dedicated studies are here proposed, in order to optimize the design and operation of GWHP systems
Vertical thermal aquifer stratification related to an open-loop ground-water heat pump system: numerical modeling results and experimental evidences
Impact of district heating and groundwater heat pump systems on the primaryenergy needs in urban areas
This work is focused on the planning of rational heating systems for urban areas. From the sustainability viewpoint, district heating is an important option to supply heat to the users in urban areas. The energy convenience of such option depends on the annual energy request, the population density and the efficiency in heat production. Among the alternative technologies, geothermal heat pumps (both open loop and closed loop heat pumps) play a crucial role. This paper aims to propose a procedure to select which users in an urban area should be connected with a district heating network and which ones should be heated through an alternative technology, in order to reach a globally optimal system from the energy viewpoint. The procedure proposes district heating as the initial choice for all the users. The users are then progressively disconnected to the network, according with the primary energy required to supply them heat, and the alternative technology is considered for disconnected users. Here, ground water heat pump is considered as the alternative technology. The total primary energy request is assumed as the objective function to be minimized. To reach this result, the exergetic cost of heat supplied through heat pumps system must be evaluated. Such evaluation is not trivial, as it must include proper analysis of both the district heating network and the alternative system. In the case of densely populated areas, an additional
consideration is necessary: the subsurface thermal degradation caused by heat pump installations may affect the performances of surrounding installations. This impact is calculated through a thermo-fluid dynamic model of the subsurface. The application to an Italian town is considered as a test case. The optimal configuration of the overall urban heating system is obtained. This configuration corresponds to the minimum primary energy
request to supply heat to all the users (those connected to the network and those using an alternative heating system)
Application of the Vulnerability Estimator for Spring Protection Areas (VESPA index) in mountain quaternary aquifers.
Optomechanical two-photon hopping
The hopping mechanism plays a key role in collective phenomena emerging in many-body physics. The ability to create and control systems that display this feature is important for next generation quantum technologies. Here we study two cavities separated by a vibrating two-sided perfect mirror and show that, within currently available experimental parameters, this system displays photon-pair hopping between the two electromagnetic resonators. In particular, the two-photon hopping is not due to tunneling, but rather to higher-order resonant processes. Starting from the classical problem we quantize the system and show this purely quantum feature. This opens the possibility to investigate a new mechanism of photon-pair propagation in optomechanical lattices
- …