Metallic multilayers for X-band Bragg reflector applications

We present a structural and high frequency (8.72GHz) electrical characterization of sputter deposited Ti/W, Ti/Ru and Mo/Ti metallic multilayers for potential application as acoustic Bragg reflectors. We prove that all metallic multilayers comprised of different acoustic impedance metals such as Ti, W, Mo are promising candidates for Bragg reflector/bottom electrode in full X-band thin film acoustic resonators. Values for high frequency resistivity of the order of $10^{-8} ohm.m$ are measured by use of a contact-free/non-invasive sheet resistance method

An economical fabrication technique for SIMOX using plasma immersion ion implantation

Buried oxide layers in Si were fabricated using non-mass analyzed plasma immersion ion implantation (PIII). The implantation was carried out by applying a large negative bias to a Si wafer immersed in an oxygen plasma and a dose of 3×1017 cm-2 of oxygen was implanted in about three minutes. Cross section transmission electron microscopy (XTEM) and Rutherford backscattering spectrometry (RES) were used to characterize the wafers. Our results indicate that a continuous buried oxide layer with a single crystal silicon overlayer was synthesizedpublished_or_final_versio

Phase transformation behaviour of porous NiTi alloys fabricated by capsule-free hot isostatic pressing

Differential scanning calorimetry (DSC) was used to characterize the phase transformation behaviour of porous Ni50Ti50 alloys fabricated by capsule-free hot isostatic pressing (CF-HIP) with different cold compaction pressures. Experimental results reveal that a multi-stage martensitic transformation (MST) exists in the sintered porous NiTi alloys on cooling while the reverse transformation upon heating is either a single or two-stage phase transformation. The DSC thermal analysis indicates that the cold compaction pressure has great effect on the subsequent transformation temperatures. Generally, the phase transformation temperatures of porous NiTi alloys with lower cold compaction pressure are higher than those compacted with higher pressure. With increase in the annealing time, the transformation temperatures increase quickly when the cold compaction pressure was 150MPa. On the other hand, the transformation temperatures change only slightly when the cold compaction pressure was varied from 300MPa to 400MPa. These phenomena can be attributed to the combined effect of larger plastic deformation with higher dislocations density produced by cold compaction and the precipitation of the second phase in the porous NiTi alloys.published_or_final_versio

Improved corrosion resistance of plasma carbon coated NiTi orthopedic materials

Nickel titanium (NiTi) alloys are useful in orthopedic applications because of their super-elastic properties and shape memory effects. However, when NiTi is used for a prolonged period of time, harmful Ni ions can leach out into the surrounding body fluid inside a human body, and so it is important to design a method to impede the out-diffusion of nickel from the materials into the biological medium. We aim at producing a barrier to mitigate the release of Ni ions during normal use. Carbon coatings have been shown to possess excellent bio-compatibility and good mechanical strength. In this work, amorphous hydrogenated DLC films with a graded C/NiTi interface were fabricated by plasma immersion ion implantation & deposition (PU & D) to provide such a barrier layer on NiTi. The elemental depth profiles and film thickness were determined by X-ray photoelectron spectroscopy (XPS) whereas the surface morphology was evaluated using atomic force microscopy (AFM). The film structure was studied by X-ray diffraction (XRD) and Raman spectroscopy. The corrosion resistance of the film was investigated using electrochemical tests based on ASTM G5-94. Compared to the control sample, the corrosion potential of the sample with the carbon coating changes from -250 to -50 mV and the film breakdown potential increases from 250 to 1200 mV. The corrosion current also diminishes from 10-6 to 10-7 A. The simulated body fluid (SBF) solutions after the electrochemical test were analyzed for Ni concentrations by inductively-coupled plasma mass spectrometry (ICPMS) and that data show that a much smaller amount of Ni has been released from the treated sample surface compared to the untreated control sample surface. Our results thus indicate that the deposited DLC film is effective in retarding the release of Ni ions from the bulk materials and more superior corrosion resistance is achieved based on our tests in a simulated fluid medium and at human body temperature.published_or_final_versio

Biomimetic deposition of apatite on surface chemically modified porous NiTi shapememory alloy

Porous NiTi shape memory alloy (SMA) with 48% porosity and an average pore size of 50800 μm was synthesized by capsule-free hot isostatic pressing (CF-HIP). To enhance the surface bioactivity, the porous NiTi SMA was subjected to H"2O"2 and subsequent NaOH treatment. Scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy analyses revealed that a porous sodium titanate (Na"2TiO"3) film had formed on the surface of the porous NiTi SMA. An apatite layer was deposited on this film after immersion in simulated body fluid at 37°C, while no apatite could be found on the surface of the untreated porous NiTi SMA. The formation of the apatite layer infers that the bioactivity of the porous NiTi SMA may be enhanced by surface chemical treatment, which is favorable for its application as bone implants. © 2008 World Scientific Publishing Company.postprin

On the Alexandrov Topology of sub-Lorentzian Manifolds

It is commonly known that in Riemannian and sub-Riemannian Geometry, the metric tensor on a manifold defines a distance function. In Lorentzian Geometry, instead of a distance function it provides causal relations and the Lorentzian time-separation function. Both lead to the definition of the Alexandrov topology, which is linked to the property of strong causality of a space-time. We studied three possible ways to define the Alexandrov topology on sub-Lorentzian manifolds, which usually give different topologies, but agree in the Lorentzian case. We investigated their relationships to each other and the manifold's original topology and their link to causality.Comment: 20 page

Ferroelectric thin film acoustic devices with electrical multiband switching ability

Design principles of a new class of microwave thin film bulk acoustic resonators with multiband resonance frequency switching ability are presented. The theory of the excitation of acoustic eigenmodes in multilayer ferroelectric structures is considered, and the principle of selectivity for resonator with an arbitrary number of ferroelectric layers is formulated. A so called “criterion function” is suggested that allows to determine the conditions for effective excitation at one selected resonance mode with suppression of other modes. The proposed theoretical approach is verifiedusing thepreexisting experimental data published elsewhere. Finally, the possible application of the two ferroelectric layers structures for switchable microwave overtone resonators, binary and quadrature phase-shift keying modulators are discussed. These devices could play a pivotal role in the miniaturization of microwave front-end antenna circuits

Accessibility-based reranking in multimedia search engines

Traditional multimedia search engines retrieve results based mostly on the query submitted by the user, or using a log of previous searches to provide personalized results, while not considering the accessibility of the results for users with vision or other types of impairments. In this paper, a novel approach is presented which incorporates the accessibility of images for users with various vision impairments, such as color blindness, cataract and glaucoma, in order to rerank the results of an image search engine. The accessibility of individual images is measured through the use of vision simulation filters. Multi-objective optimization techniques utilizing the image accessibility scores are used to handle users with multiple vision impairments, while the impairment profile of a specific user is used to select one from the Pareto-optimal solutions. The proposed approach has been tested with two image datasets, using both simulated and real impaired users, and the results verify its applicability. Although the proposed method has been used for vision accessibility-based reranking, it can also be extended for other types of personalization context

A Single Bolus of Docosahexaenoic Acid Promotes Neuroplastic Changes in the Innervation of Spinal Cord Interneurons and Motor Neurons and Improves Functional Recovery after Spinal Cord Injury

This work was supported by Chang GungMemorialHospital, Taiwan CMRPG3A1051–1054to Z.-H.L., CMDRP and Barts and the London Charity to P.K.Y. and A.T.M.-T., and the Nathalie Rose Barr PhD Studentship ISRT to L.A. andJ.V.P

Suppression of nickel out-diffusion from porous nickel-titanium shape memory alloy by plasma immersion ion implantation

Summary form only given. Porous nickel titanium is a promising material for medical application not only because of its super elasticity and shape memory effect but also the porous structure which may enhance bone growth due to the increased surface area. It is thus especially suitable for bone tissue in-growth and fixation of biomedical implants. However, like its dense counterpart, Ni leaching from the materials causes health concern. Thus, in order to suppress Ni diffusion from the materials to body fluids and tissues in humans, a diffusion barrier or similar structure must be introduced. In this work, we produced this diffusion barrier layer by oxygen or nitrogen plasma immersion ion implantation (PIII). In vitro tests were conducted by immersing the plasma-treated NiTi into simulated body fluid (SBF) at 37plusmn0.5degC for 5 weeks and the resulting SBF was analyzed for Ni and Ti using inductively-coupled plasma mass spectrometry (ICMPS). Our results show that Ni leaching is significantly mitigated by both nitrogen and oxygen PIII.published_or_final_versio