506 research outputs found
Goldbach-Linnik type problems involving one prime, four prime cubes and powers of 2
In this paper, we prove that every pair of sufficiently large odd integers
can be represented as a pair of a prime, four cubes of primes and powers
of .Comment: 16 page
Using MicroPET Imaging in Quantitative Verification of Acupuncture Effect in Ischemia Stroke Treatment
While acupuncture has survived several thousand years’ evolution of medical practice, its function still remains as a myth from the view point of modern medicine. Our goal in this paper is to quantitatively understand the function of acupuncture in ischemia stroke treatment. We carried out a comparative study using the Sprague Dawley rat animal model. We induced the focal cerebral ischemia in the rats using the middle cerebral artery occlusion (MCAO) procedure. For each rat from the real acupuncture group (n = 40), sham acupoint treatment group (n = 54), and blank control group (n = 16), we acquired 3-D FDG-microPET images at baseline, after MCAO, and after treatment (i.e., real acupuncture, sham acupoint treatment, or resting according to the group assignment), respectively. After verifying that the injured area is in the right hemisphere of the cerebral cortex in the brain by using magnetic resonance imaging(MRI) and triphenyl tetrazolium cchloride (TTC)-staining, we directly compared the glucose metabolism in the right hemisphere of each rat. We carried out t-test and permutation test on the image data. Both tests demonstrated that acupuncture had a more positive effect than non-acupoint stimulus and blank control (P < 0.025) in increasing the glucose metabolic level in the stroke-injured area in the brain, while there was no statistically significant difference between non-acupoint stimulus and blank control (P>0.15). The immediate positive effect of acupuncture over sham acupoint treatment and blank control is verified using our experiments. The long-term benefit of acupuncture needs to be further studied
Ultra-wideband THz/IR Metamaterial Absorber based on Doped Silicon
Metamaterial-based absorbers have been extensively investigated in the
terahertz (THz) range with ever increasing performances. In this paper, we
propose an all-dielectric THz absorber based on doped silicon. The unit cell
consists of a silicon cross resonator with an internal cross-shaped air cavity.
Numerical results suggest that the proposed absorber can operate from THz to
mid-infrared, having an average power absorption of >95% between 0.6 and 10
THz. Experimental results using THz time-domain spectroscopy show a good
agreement with simulations. The underlying mechanisms for broadband absorptions
are attributed to the combined effects of multiple cavities modes formed by
silicon resonators and bulk absorption in the substrate, as confirmed by
simulated field patterns. This ultra-wideband absorption is polarization
insensitive and can operate across a wide range of the incident angle. The
proposed absorber can be readily integrated into silicon-based platforms and is
expected to be used in sensing, imaging, energy harvesting and wireless
communications systems.Comment: 6 pages, 5 figure
Receiver Function Analysis and Acoustic Waveform Modeling for Imaging Earth’s Crust: New Techniques and Their Applications
The crust is the outer-most layer of the earth with thickness up to 80 km. Massive seismic waveform data have enabled imaging fine crustal structures with the aid of new imaging techniques. In this thesis, I develop seismic imaging techniques to take ful
Design, fabrication and characterization of a MEMS gravity gradiometer
Gravity gradiometers have been developed to determine the gravity gradient for a number of terrestrial observations including oil and mineral exploration, measurement of the crustal anomaly, and archaeology since their first demonstration in the 1890s by the Hungarian physicist Lorand Eotvos. However, conventional gravity gradiometers weigh hundreds of kilograms to several tens. In order to integrate a gravity gradiometer into a weight- and volume-limited spacecraft
or cube satellite, miniaturization becomes a priority. Microelectromechanical systems (MEMS) technologies offer a possible route. Only two MEMS gravity gradiometers have been developed so far but neither of them can be operated under Earth’s gravity to allow pre-flight validation.
There are two possible approaches for implementation of a gravity gradiometer: differential-accelerometer and torsion-balance that depend on how the force difference is measured. For the former, the gravity gradient is determined by the difference between two accelerometers’ outputs divided by the separation. The latter transduces the force difference applied on two coupled masses as a torque, which is then balanced by a rotary suspension. The latter is approved to be a better option for implementing a MEMS gravity gradiometer. The aim of this thesis is to develop a torsion-balance-based MEMS gravity gradiometer for operation both on a satellite for
planetary explorations and on Earth for airborne or shipborne gravity gradient surveys. The design rationales and noise analysis are introduced. With a feasibility study to achieve 1 Eo/rtHz, exploration for Mars gravitational field is possible.
A seesaw-lever force-balancing suspension is designed to bear the gravity offset and to be compliant with respect to in-plane rotation but stiff with respect to other spurious vibrations. Closed-form solutions of gradiometer dynamics are derived and agree with finite element analysis (FEA) simulations and experimental results. Several prototypes of the MEMS gravity gradiometer based on this suspension are fabricated by through-wafer deep reactive-ion etching
(DRIE) with their measured resonant frequencies varying from 6.6 Hz to 27 Hz.
A normalized lateral capacitive array transducer (LCAT) is analysed. Its angular counterpart rotational capacitive array transducer (RCAT) is designed to be applied on the MEMS gravity gradiometer to determine the angular displacement induced by the gravity gradient. A frontend circuit is designed for the gravity gradiometer chip and implemented on a printed circuit board (PCB) that is also used to accommodate the MEMS chip. With the shortest paths from the MEMS chip to the front-end, the pre-amp noise is minimized. A conditioning circuit is designed to amplify, demodulate, and low-pass filter the pre-amplification signal.
The MEMS gravity gradiometer chips were fabricated by four-mask processes on single-crystal silicon substrates using two metal layers insulated by a deposited silicon dioxide layer to form the RCAT, and using DRIE to etch through silicon wafers to define the mechanical structures. Both the stator and rotor dies were fabricated on the same wafer, singulated by pressing dicing-free features, and integrated by flip-chip technology. Then, the fully functional
MEMS gravity gradiometer was characterized by a customized platform that provides angular accelerations. The transfer function of the gradiometer prototype was investigated and proved to be operational on Earth.
Silicon suspensions suffer from changes in stiffness due to the temperature-dependent Young’s modulus of silicon. The sag displacement drift of a differential-accelerometer-based silicon gravity gradiometer due to temperature is problematic. A silicon/solder bilayer thermal actuator is developed to compensate the sag thermal-drift using the mismatching of the coefficient of thermal expansion of different materials. This design has been applied on a MEMS seismometer as a contribution to NASA’s InSight Mars mission.Open Acces
Latent Feature Relation Consistency for Adversarial Robustness
Deep neural networks have been applied in many computer vision tasks and
achieved state-of-the-art performance. However, misclassification will occur
when DNN predicts adversarial examples which add human-imperceptible
adversarial noise to natural examples. This limits the application of DNN in
security-critical fields. To alleviate this problem, we first conducted an
empirical analysis of the latent features of both adversarial and natural
examples and found the similarity matrix of natural examples is more compact
than those of adversarial examples. Motivated by this observation, we propose
\textbf{L}atent \textbf{F}eature \textbf{R}elation \textbf{C}onsistency
(\textbf{LFRC}), which constrains the relation of adversarial examples in
latent space to be consistent with the natural examples. Importantly, our LFRC
is orthogonal to the previous method and can be easily combined with them to
achieve further improvement. To demonstrate the effectiveness of LFRC, we
conduct extensive experiments using different neural networks on benchmark
datasets. For instance, LFRC can bring 0.78\% further improvement compared to
AT, and 1.09\% improvement compared to TRADES, against AutoAttack on CIFAR10.
Code is available at https://github.com/liuxingbin/LFRC.Comment: Tech repor
CAT:Collaborative Adversarial Training
Adversarial training can improve the robustness of neural networks. Previous
methods focus on a single adversarial training strategy and do not consider the
model property trained by different strategies. By revisiting the previous
methods, we find different adversarial training methods have distinct
robustness for sample instances. For example, a sample instance can be
correctly classified by a model trained using standard adversarial training
(AT) but not by a model trained using TRADES, and vice versa. Based on this
observation, we propose a collaborative adversarial training framework to
improve the robustness of neural networks. Specifically, we use different
adversarial training methods to train robust models and let models interact
with their knowledge during the training process. Collaborative Adversarial
Training (CAT) can improve both robustness and accuracy. Extensive experiments
on various networks and datasets validate the effectiveness of our method. CAT
achieves state-of-the-art adversarial robustness without using any additional
data on CIFAR-10 under the Auto-Attack benchmark. Code is available at
https://github.com/liuxingbin/CAT.Comment: Tech repor
CHITNet: A Complementary to Harmonious Information Transfer Network for Infrared and Visible Image Fusion
Current infrared and visible image fusion (IVIF) methods go to great lengths
to excavate complementary features and design complex fusion strategies, which
is extremely challenging. To this end, we rethink the IVIF outside the box,
proposing a complementary to harmonious information transfer network (CHITNet).
It reasonably transfers complementary information into harmonious one, which
integrates both the shared and complementary features from two modalities.
Specifically, to skillfully sidestep aggregating complementary information in
IVIF, we design a mutual information transfer (MIT) module to mutually
represent features from two modalities, roughly transferring complementary
information into harmonious one. Then, a harmonious information acquisition
supervised by source image (HIASSI) module is devised to further ensure the
complementary to harmonious information transfer after MIT. Meanwhile, we also
propose a structure information preservation (SIP) module to guarantee that the
edge structure information of the source images can be transferred to the
fusion results. Moreover, a mutual promotion training paradigm (MPTP) with
interaction loss is adopted to facilitate better collaboration among MIT,
HIASSI and SIP. In this way, the proposed method is able to generate fused
images with higher qualities. Extensive experimental results demonstrate the
superiority of our CHITNet over state-of-the-art algorithms in terms of visual
quality and quantitative evaluations
- …