Investigation of piles behavior under lateral cyclic load

In this paper, the capability of 3D nonlinear finite element models is validated by single pile and 53 pile group filed experiments that is subjected to cyclic lateral loading. Then, a series 3D finite elements models are built to analyze the effect of the number of cycles of lateral loading, pile spacing, and pile group arrangement. The results have shown that the number of cycles affected the pile-soil system stiffness seriously, and the pile group effect became insignificant as the increase of pile spacing, while this effect became more significant with the increase of the pile group arrangement. In practical engineering, the pile spacing and pile group arrangement should be considered and chosen carefully

Lateral Response of Bridge Pile Groups in Liquefiable Soil with Surface Non-Liquefiable Layer Using Shaking Table Test

This paper conducts a shaking table test study on seismic response of low-cap pile groups and bridge structure in liquefiable ground. The soil profile in the test consisted of the horizontal saturated sand layer overlaid the silty clay layer. The base was excited by three different El Centro earthquake events. The preliminary liquefaction characteristics of ground firstly were analyzed. The bending moment of the pile was mainly introduce in the note. There’s no doubt that the shaking table test provided the necessary groundwork to study lateral response of bridge pile groups in liquefiable soil with surface non-liquefiable layer

DEM Investigation of Particle-Scale Mechanical Properties of Frozen Soil Based on the Nonlinear Microcontact Model Incorporating Rolling Resistance

Although frozen soil is in nature the discrete material, it is generally treated as the continuum material. The mechanical properties of frozen soil are so complex to describe adequately by conventional continuum mechanics method. In this study, the nonlinear microcontact model incorporating rolling resistance is proposed to investigate the particle-scale mechanical properties of frozen soil. The failure mechanism of frozen soil is explicated based on the evolution of contact force chains and propagation of microcracks. In addition, the effects of contact stiffness ratio and friction coefficient on stress-strain curve and energy evolution are evaluated. The results show that the nonlinear microcontact model incorporating rolling resistance can better describe the experimental data. At a higher axial strain, the contact force chains near shear band which can give rise to the soil arch effect rotate away from the shear band inclination but not so much as to become perpendicular to it. The propagation of microcracks can be divided into two phases. The stress-strain curve is strongly influenced by contact stiffness ratio. In addition, friction coefficient does not significantly affect the initial tangential modulus. Compared with frictional coefficient, the effect of contact stiffness ratio on stress-strain curve and energy evolution is greater

Discussion on the Feasibility of the Integration of Wind Power and Coal Chemical Industries for Hydrogen Production

To improve the utilization rate of the energy industry and reduce high energy consumption and pollution caused by coal chemical industries in northwestern China, a planning scheme of a wind-coal coupling energy system was developed. This scheme involved the analysis method, evaluation criteria, planning method, and optimization operation check for the integration of a comprehensive evaluation framework. A system was established to plan the total cycle revenue to maximize the net present value of the goal programming model and overcome challenges associated with the development of new forms of energy. Subsequently, the proposed scheme is demonstrated using a 500-MW wind farm. The annual capacity of a coal-to-methanol system is 50,000. Results show that the reliability of the wind farm capacity and the investment subject are the main factors affecting the feasibility of the wind-coal coupled system. Wind power hydrogen production generates O2 and H2, which are used for methanol preparation and electricity production in coal chemical systems, respectively. Considering electricity price constraints and environmental benefits, a methanol production plant can construct its own wind farm, matching its output to facilitate a more economical wind-coal coupled system. Owing to the high investment cost of wind power plants, an incentive mechanism for saving energy and reducing emissions should be provided for the wind-coal coupled system to ensure economic feasibility and promote clean energy transformation

Effects of sliding liquefaction on homogeneous loess landslides in western China

Abstract Sliding liquefaction is considered to be the cause of high-speed and long-distance sliding of some homogeneous loess landslides in western China. However, there is still a lack of necessary experimental research and analysis on the effects of sliding liquefaction on these landslides. In this work, the effects of sliding liquefaction on irrigation-induced, high-speed and long-distance loess landslides on the South Jingyang Tableland area in China are studied by performing large-scale ring shear tests and using the sled mode. The results are as follows. (1) There are two kinds of long-runout sliding modes of loess landslides on the South Jingyang Tableland: sliding along the terrace surface and sliding within the saturated terrace alluvium, which is associated with sliding liquefaction. Both sliding modes can lead to long-runout sliding. (2) There are some differences in the inclination of the sliding surface between the two sliding modes. Based on the inclination of the sliding surface, the corresponding sliding mode can be distinguished. (3) Under the two sliding modes, the large shear mechanical properties of the two-layer soil composed of loess and alluvial sandy silt show significant differences. The friction between the loess and dry terrace alluvium increases with increasing normal stress and shear rate, while the friction between the loess and saturated terrace alluvium presents the opposite trend. The results show that the sliding distances under different sliding modes present opposite trends with the change in sliding speed. (4) Based on the test results from the ring shear tests and the morphological characteristics of the sliding surface, the sliding mode and sliding distance of a loess landslide can be identified and predicted

Structural Stiffness Identification Based on the Extended Kalman Filter Research

For the response acquisition of the structure section measuring points, the method of identifying the structural stiffness parameters is developed by using the extended Kalman filter. The state equation of structural system parameter is a nonlinear equation. Dispersing the structural dynamic equation by using Newmark-β method, the state transition matrix of discrete state equation is deduced and the solution of discrete state equation is simplified. The numerical simulation shows that the error of structural recognition doesnot exceed 5% when the noise level is 3%. It meets the requirements of the error limit of the engineering structure, which indicates that the derivation described in this paper has the robustness for the structural stiffness recognition. Shear structure parameter identification examples illustrate its applicability, and the method can also be used to identify physical parameters of large structure

Frost heave performance of a foundation at an overhead transmission line in the alpine seasonal frozen regions

The Manzhouli 500 kV electrical transmission line travels more than 218 km through seasonal frozen regions, which result in many freezing soil engineering problems with respect to the transmission tower foundations. Physical model tests of independent reinforced concrete foundations at various temperatures were conducted and verified by numerical simulation to investigate the frost-heaving characteristics of the reinforced concrete foundation in an alpine seasonally frozen region. The evolution of the temperature field, frost-heaving force, and water migration of frozen soil were studied in an open water refill environment with a dead load. The heave force in the foundation soil increases as temperature decreases. The horizontal heave force in the middle and upper parts of the foundation can reach 540 kPa. However, the maximum tangential frost-heaving force becomes 3.83 kN, and the maximum frozen depth of the frozen soil was 240 mm. During the freezing process, the frost heave of the foundation was significantly more noticeable. The correlation between experimental and simulated values is good, and each parameter’s variation error is less than 5 %. Finally, control measures of frost heave were proposed to guide engineering practice based on experimental and numerical studies

A Contrast Analysis of Deformation Characteristics and Critical Dynamic Stress of Natural and Fiber-Binder Reinforced Subgrade Filler after Different Freeze-Thaw Cycles

To investigate the dynamic stability of natural subgrade filler (NSF) and fiber-binder reinforced subgrade filler (RSF) under cyclic load after freeze–thaw (FT) cycles, a triaxial test was conducted to determine the correlation between cumulative plastic strain (CPS) and the quantity of loading cycles, as well as the evolution law of dynamic strength and critical dynamic stress (CDS) with different FT cycles. The CPS change in the NSF and RSF shows three states (stable, critical, and destructive) with increasing vibration times. However, both fillers have different failure forms, and the curve shapes of the CPS with loading cycle quantities before and after failure are also different. With the number of FT cycles increasing, the requisite dynamic stress threshold for NSF specimen failure decreases continuously. After three FT cycles, the anti-cumulative deformation ability of the NSF decreases by approximately 32%. The anti-cumulative deformation abilities of the NSF after seven and nine FT cycles, respectively, are similar. The amelioration measures could significantly enhance the FT resistance of the NSF. After zero, one, three, five, seven, and nine FT cycles, the requisite dynamic stress threshold for the RSF to reach destruction is increased 1.52, 1.89, 1.98, 2.32, 2.2, and 2.45 times, respectively, compared to that of the NSF. A mechanical model of critical dynamic stress of the NSF and RSF that considers the FT cycle was obtained using a multivariate nonlinear regression method

Mechanical Behaviors of Natural Sand Soils and Modified Soils in Heavy-Haul Railway Embankment

The addition of chemical or mechanical materials, such as fibers or stabilizers, is frequently utilized in geotechnical engineering to improve the mechanical properties of problematic soils. In this study, great efforts have been made to obtain insight into the mechanical properties of the natural, fiber, and chemical additive-stabilized soil in heavy-haul railway embankment. A series of triaxial compression tests are conducted on the stabilized samples of different preparation conditions, including water content, compaction degree, confining pressure, fiber content, fiber length, stabilizer content, and curing time. Results show that the shear strength of natural soils shows a distinct increase after adding fiber and chemical additive stabilization. The optimum fiber content and length for fiber stabilization are 0.2% and 12 mm, respectively. The initial tangential modulus and failure stress of chemical stabilized samples increase with the increase of additive dosage or curing time. Meanwhile, a brittle characteristic is observed. In the process of determining the reinforcement methods in practical projects, several other considerations are included, such as equipment and time available, especially for stabilized soils. The fiber-reinforced soils and stabilized soils are efficient for increasing the shear strength and changing of the brittleness character of the heavy-haul railway embankment. The results of this study could provide a valuable reference for geotechnical engineers dealing with soil problems, especially for the heavy-haul railway embankment