8 research outputs found
Assembly and covalent cross-linking of an amine-functionalised metal-organic cage
The incorporation of reactive functional groups onto the exterior of metal-organic cages (MOCs) opens up new opportunities to link their well-defined scaffolds into functional porous solids. Amine moieties offer access to a rich catalogue of covalent chemistry; however, they also tend to coordinate undesirably and interfere with MOC formation, particular in the case of Cu2 paddlewheel-based MOCs. We demonstrate that tuning the basicity of an aniline-functionalized ligand enables the self-assembly of a soluble, amine-functionalized Cu4L4 lantern cage (1). Importantly, we show control over the coordinative propensity of the exterior amine of the ligand, which enables us to isolate a crystalline, two-dimensional metal-organic framework composed entirely of MOC units (2). Furthermore, we show that the nucleophilicity of the exterior amine of 1 can be accessed in solution to generate a cross-linked cage polymer (3) via imine condensation.Matthew L. Schneider, Adrian W. Markwell-Heys, Oliver M. Linder-Patton and Witold M. Bloc
Fabrication of 3D Oriented MOF Micropatterns with Anisotropic Fluorescent Properties
Published online: May 2, 2023Micropatterning crystalline materials with oriented pores is necessary for the fabrication of devices with anisotropic properties. Crystalline and porous metalâorganic frameworks (MOFs) are ideal materials as their chemical and structural mutability enables precise tuning of functional properties for applications ranging from microelectronics to photonics. Herein, a patternable oriented MOF film is designed: by using a photomask under X-ray exposure, the MOF film decomposes in the irradiated areas, remaining intact in the unexposed regions. The MOF film acts simultaneously as a resist and as functional porous material. While the heteroepitaxial growth from aligned Cu(OH)â nanobelts is used to deposit oriented MOF films, the sensitivity to radiation is achieved by integrating a brominated dicarboxylate ligand (BrâBDC) into a copper-based MOF CuâLâDABCO (DABCO = 1,4-diazabicyclo[2.2.2]octane; L = BDC/BrâBDC). The lithographed samples act as diffraction gratings upon irradiation with a laser, thus confirming the quality of the extended MOF micropattern. Furthermore, the oriented MOF patterns are functionalized with fluorescent dyes. As a result, by rotating the polarization angle of the laser excitation, the alignment of the dye in the MOF is demonstrated. By controlling the functional response to light, this MOF patterning protocol can be used for the microfabrication of optical components for photonic devices.Miriam de J. VelĂĄsquez-HernĂĄndez, Mercedes Linares-Moreau, Lea A. Brandner, Benedetta Marmiroli, Mariano Barella, Guillermo P. Acuna, Simone Dal Zilio, Margot F. K. Verstreken, Dmitry E. Kravchenko, Oliver M. Linder-Patton, Jack D. Evans, Helmar Wiltsche, Francesco Carraro, Heimo Wolinski, Rob Ameloot, Christian Doonan, and Paolo Falcar
A stable coordination polymer based on rod-like silver(I) nodes with contiguous Ag-S bonding
Silver(I)-based coordination polymers or metal-organic frameworks (MOFs) display useful antibacterial properties, whereby distinct materials with different bonding can afford control over the release of silver(I) ions. Such silver(I) materials are comprised of discrete secondary building units (SBUs), and typically formed with ligands possessing only soft or borderline donors. We postulated that a linker with four potential donor groups, comprising carboxylate and soft thioether donors, 2,5-bis (allylsulfanyl) benzene dicarboxylic acid (ASBDC), could be used to form stable, highly connected coordination polymers with silver(I). Here, we describe the synthesis of a new material, (Ag2(ASBDC)), which possesses a rod-like metal node-based 3D honeycomb structure, strongly -stacked linkers, and steric bulk to protect the node. Due to the rod-like metal node and the blocking afforded by the ordered allyl groups, the material displays notable thermal and moisture stability. An interesting structural feature of (Ag2(ASBDC)) is contiguous Ag-S bonding, essentially a helical silver chalcogenide wire, which extends through the structure. These interesting structural features, coupled with the relative ease by which MOFs made with linear dicarboxylate linkers can be reticulated, suggests this may be a structure type worthy of further investigation.Harley D. Betts, Oliver M. Linder-Patton and Christopher J. Sumb
A covalent deprotection strategy for assembling supramolecular coordination polymers from metal-organic cages
A Cu4L4 metal-organic cage (MOC) composed of amine-protected ligands forms supramolecular coordination polymers (SCPs) upon covalent post-assembly deprotection. The amorphous SCPs form by virtue of aniline-copper coordination and possess a tunable porosity based on the rate of deprotection.Matthew L. Schneider, Oliver M. Linder-Patton and Witold M. Bloc
Assembly of a Heterometallic Cu(II)-Pd(II) Cage by Post-assembly Metal Insertion
Porous structures based on multi-metallic motifs are receiving growing interest, but their general preparation still remains a challenge. Here, we report the self-assembly and structure of a CuII metalâorganic cage (MOC) that is functionalized with free bis(pyrazolyl)methane sites. The homometallic CuâLâ cage is isolated as a water-stable crystalline solid, and its formation is dependent on metalâligand stoichiometry and the pre-organization of the Cuâ paddlewheel. We show by X-ray diffraction and SEMâEDX that PdII chloride can be quantitatively inserted into the free chelating sites of the MOC to yield a [Cuâ(L(PdClâ))â] structure. Moreover, the solvent employed in the metalation dictates the solid-state isomerism of the heterometallic cage - a further handle to control the MOCâs structural diversity and permanent porosity.Mei Tieng Yong, Oliver M. Linder-Patton, and Witold M. Bloc
Linking metalâorganic cages pairwise as a design approach for assembling multivariate crystalline materials
Using metalâorganic cages (MOCs) as preformed supermolecular building-blocks (SBBs) is a powerful strategy to design functional metalâorganic frameworks (MOFs) with control over the pore architecture and connectivity. However, introducing chemical complexity into the network via this route is limited as most methodologies focus on only one type of MOC as the building-block. Herein we present the pairwise linking of MOCs as a design approach to introduce defined chemical complexity into porous materials. Our methodology exploits preferential Rh-aniline coordination and stoichiometric control to rationally link CuâLâ and RhâLâ MOCs into chemically complex, yet extremely well-defined crystalline solids. This strategy is expected to open up significant new possibilities to design bespoke multi-functional materials with atomistic control over the location and ordering of chemical functionalities.Adrian W. Markwell-Heys, Michael Roemelt, Ashley D. Slattery, Oliver M. Linder-Patton and Witold M. Bloc
Influence of the synthesis and storage conditions on the activity of Candida antarctica lipase B ZIF-8 biocomposites
Published: May 7, 2021The biomimetic mineralization of zeolitic imidazolate framework-8 (ZIF-8) has been reported as a strategy for enzyme immobilization, enabling the heterogenization and protection of biomacromolecules. Here, we report the preparation of different Candida antarctica lipase B biocomposites (CALB@ZIF-8) formed by altering the concentrations of Zn²⺠and 2-methylimidazole (2-mIM). The influence of synthetic conditions on the catalytic activity of the lipase CALB was examined by hydrolysis and transesterification assays in aqueous and organic media, respectively. We demonstrated that for both reactions, activity was retained for the biocomposites formed at low Zn²âş/2-mIM ratios but notably almost entirely lost when the ligand concentration used to form the biocomposites was increased. Additionally, phosphate buffer could regenerate the activity of larger particles by degrading the crystal surfaces and releasing encapsulated CALB into solution. Transesterification reactions using CALB@ZIF-8 biocomposites were undertaken in 100% hexane, giving rise to enhanced CALB activity relative to the free enzyme. These observations highlight the fundamental importance of synthetic protocols and operating parameters for developing enzyme@MOF biocomposites with improved activity in challenging conditions.Natasha K. Maddigan, Oliver M. Linder-Patton, Paolo Falcaro, Christopher J. Sumby, Stephen G. Bell, and Christian J. Doona
MOF matrix isolation: cooperative conformational mobility enables reliable single crystal transformations
Obtaining structural information for highly reactive metal-based species can provide valuable insight into important chemical transformations or catalytic processes. Trapping these metal-based species within the cavities of porous crystalline hosts, such as metal-organic frameworks (MOFs), can stabilise them, allowing detailed structural elucidation by single crystal X-ray diffraction. Previously, we have used a bespoke flexible MOF, [MnâLâL'] (MnMOF-1, where L = bis-(4-carboxyphenyl-3,5-dimethylpyrazolyl)methane and L = L', but L' has a vacant N,N'-chelation site), which has a chelating site capable of post-synthetically binding metal ions, to study organometallic transformations and fundamental isomerisation processes. This manuscript will report the underlying conformational flexibility of the framework, demonstrate the solvent dependency of post-synthetic metalation, and show that the structural flexibility of the linker site and framework are critical to controlling and achieving high levels of metal loading (and therefore site occupancy) during chemical transformations. From these results, a set of design principles for linker-based "matrix isolation" and structure determination in MOFs are derived.Ricardo A. Peralta, Michael T. Huxley, Rosemary J. Young, Oliver M. Linder-Patton, Jack D. Evans, Christian J. Doonan and Christopher J. Sumb