Modulated Oscillations in Three Dimensions

The analysis of the fully three-dimensional and time-varying polarization characteristics of a modulated trivariate, or three-component, oscillation is addressed. The use of the analytic operator enables the instantaneous three-dimensional polarization state of any square-integrable trivariate signal to be uniquely defined. Straightforward expressions are given which permit the ellipse parameters to be recovered from data. The notions of instantaneous frequency and instantaneous bandwidth, generalized to the trivariate case, are related to variations in the ellipse properties. Rates of change of the ellipse parameters are found to be intimately linked to the first few moments of the signal's spectrum, averaged over the three signal components. In particular, the trivariate instantaneous bandwidth---a measure of the instantaneous departure of the signal from a single pure sinusoidal oscillation---is found to contain five contributions: three essentially two-dimensional effects due to the motion of the ellipse within a fixed plane, and two effects due to the motion of the plane containing the ellipse. The resulting analysis method is an informative means of describing nonstationary trivariate signals, as is illustrated with an application to a seismic record.Comment: IEEE Transactions on Signal Processing, 201

On the Analytic Wavelet Transform

An exact and general expression for the analytic wavelet transform of a real-valued signal is constructed, resolving the time-dependent effects of non-negligible amplitude and frequency modulation. The analytic signal is first locally represented as a modulated oscillation, demodulated by its own instantaneous frequency, and then Taylor-expanded at each point in time. The terms in this expansion, called the instantaneous modulation functions, are time-varying functions which quantify, at increasingly higher orders, the local departures of the signal from a uniform sinusoidal oscillation. Closed-form expressions for these functions are found in terms of Bell polynomials and derivatives of the signal's instantaneous frequency and bandwidth. The analytic wavelet transform is shown to depend upon the interaction between the signal's instantaneous modulation functions and frequency-domain derivatives of the wavelet, inducing a hierarchy of departures of the transform away from a perfect representation of the signal. The form of these deviation terms suggests a set of conditions for matching the wavelet properties to suit the variability of the signal, in which case our expressions simplify considerably. One may then quantify the time-varying bias associated with signal estimation via wavelet ridge analysis, and choose wavelets to minimize this bias

Generalized Morse Wavelets as a Superfamily of Analytic Wavelets

The generalized Morse wavelets are shown to constitute a superfamily that essentially encompasses all other commonly used analytic wavelets, subsuming eight apparently distinct types of analysis filters into a single common form. This superfamily of analytic wavelets provides a framework for systematically investigating wavelet suitability for various applications. In addition to a parameter controlling the time-domain duration or Fourier-domain bandwidth, the wavelet {\em shape} with fixed bandwidth may be modified by varying a second parameter, called $\gamma$. For integer values of $\gamma$, the most symmetric, most nearly Gaussian, and generally most time-frequency concentrated member of the superfamily is found to occur for $\gamma=3$. These wavelets, known as "Airy wavelets," capture the essential idea of popular Morlet wavelet, while avoiding its deficiencies. They may be recommended as an ideal starting point for general purpose use

Analysis of Modulated Multivariate Oscillations

The concept of a common modulated oscillation spanning multiple time series is formalized, a method for the recovery of such a signal from potentially noisy observations is proposed, and the time-varying bias properties of the recovery method are derived. The method, an extension of wavelet ridge analysis to the multivariate case, identifies the common oscillation by seeking, at each point in time, a frequency for which a bandpassed version of the signal obtains a local maximum in power. The lowest-order bias is shown to involve a quantity, termed the instantaneous curvature, which measures the strength of local quadratic modulation of the signal after demodulation by the common oscillation frequency. The bias can be made to be small if the analysis filter, or wavelet, can be chosen such that the signal's instantaneous curvature changes little over the filter time scale. An application is presented to the detection of vortex motions in a set of freely-drifting oceanographic instruments tracking the ocean currents

Using feedback to promote learning: student and tutor perspectives

This paper summarises a study of students’ and staff perceptions and experiences of assessment feedback practice across a post-1992 university. Phases 1 and 2 of the project gathered students’ and academic colleagues’ views on assessment feedback practice. Focus groups were then carried out with students and one discussion was video recorded for subsequent use in workshops with faculty colleagues. Students’ and staff’s thoughts on issues militating against good assessment feedback practice were gathered, commented on, analysed, and reported back to the faculties. The student focus groups provided interesting insights as to how students perceive and receive feedback which were classified as being related to content, clarity and style. It was established that, with very few exceptions, issues and good practice in assessment feedback can be generalised across disciplines and, in the main, staff and students share their perceptions of what constitutes good assessment feedback

Ejection Forces and Friction Coefficients from Injection Molding Experiments Using Rapid Tooling Inserts

Experiments have been performed with injection mold inserts made using solid freeform fabrication processes in an effort to further study such applications for economic production of small quantities of parts. Static friction coefficients were determined for HDPE and HIPS against P-20 steel, sintered LaserForm ST-100, and stereolithography SL 5170 using the ASTM D 1894 standard. Injection mold inserts were constructed of the same three materials and were used to inject cylindrical parts using HDPE and HIPS. Ejection forces were measured, and a model was used to calculate ejection forces and apparent coefficients of static friction. Statistical analyses were used to determine the effects of packing time, cooling time and packing pressure on ejection force for the three insert types. This paper compares experimental and calculated ejection forces, compares standard friction test results to calculated apparent coefficients of friction, summarizes the statistical results, and comments on the feasibility of using rapid tooled inserts for injection molding.Mechanical Engineerin

Comment on ``Evidence for Anisotropic State of Two-Dimensional Electrons in High Landau Levels''

In a recent letter M. Lilly et al [PRL 82, 394 (1999)] have shown that a highly anisotropic state can arise in certain two dimensional electron systems. In the large square samples studied, resistances measured in the two perpendicular directions are found to have a ratio that may be 60 or larger at low temperature and at certain magnetic fields. In Hall bar measurements, the anisotropy ratio is found to be much smaller (roughly 5). In this comment we resolve this discrepancy by noting that the anisotropy of the underlying sheet resistivities is correctly represented by Hall bar resistance measurements but shows up exponentially enhanced in resistance measurements on square samples due to simple geometric effects. We note, however, that the origin of this underlying resistivity anisotropy remains unknown, and is not addressed here.Comment: 1 page, minor calculational error repaire