Cytotoxic effects of ZnO hierarchical architectures on RSC96 Schwann cells

The alteration in intracellular Zn(2+) homeostasis is attributed to the generation of intracellular reactive oxygen species, which subsequently results in oxidative damage of organelles and cell apoptosis. In this work, the neurotoxic effects of ZnO hierarchical architectures (nanoparticles and microspheres, the prism-like and flower-like structures) were evaluated through the 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide assay using RSC96 Schwann cells as the model. Cell apoptosis and cell cycle were detected using flow cytometry. The concentration of Zn(2+) in the culture media was monitored using atomic absorption spectrometry. The results show that ZnO nanoparticles and microspheres displayed significant cytotoxic effects on RSC96 Schwann cells in dose- and time-dependent manners, whereas no or low cytotoxic effect was observed when the cells were treated with the prism-like and flower-like ZnO. A remarkable cell apoptosis and G2/M cell cycle arrest were observed when RSC96 Schwann cells were exposed to ZnO nanoparticles and microspheres at a dose of 80 μg/mL for 12 h. The time-dependent increase of Zn(2+) concentration in the culture media suggests that the cytotoxic effects were associated with the decomposition of ZnO hierarchical architecture and the subsequent release of Zn(2+). These results provide new insights into the cytotoxic effects of complex ZnO architectures, which could be prominently dominated by nanoscale building blocks

Evaluation of PRGD/FK506/NGF conduits for peripheral nerve regeneration in rats

Context : Both tacrolimus (FK506) and nerve growth factor (NGF) enhance peripheral nerve regeneration, and in vitro experimental results demonstrate that the combination of FK506 and NGF increased neurite outgrowth compared with either treatment alone. Aim : To determine if the combination of FK506 and NGF benefits peripheral nerve regeneration compared with either treatment alone in vivo. Settings and Design : Rat sciatic nerves were cut off to form a 10 mm defect and repaired with the nerve conduits. All of the 32 Wistar rats were randomly divided into 4 groups: Group A: RGD peptide modification of poly{(lactic acid)-co-[(glycolic acid)-alt-(L-lysine)]} (PRGD)/FK506/NGF; Group B: PRGD/FK506; Group C: PRGD/NGF; and Group D: autologous nerves. Materials and Methods : At 3 months after surgery, the regenerated rat sciatic nerve was evaluated by electrophysiology, calf triceps wet weight recovery rate, and histologic assessment. Statistical Analysis Used : The SPSS 10.0 software (Bizinsight, Beijing China) was used for statistical analysis. Results : The compound muscle action potentials (CMAPs) of groups A and D were significantly stronger than those of groups B and C. The calf triceps wet weight recovery rate of groups A and D were higher than those of groups B and C. The regenerated nerves of groups A and D were more mature than those of groups B and C. There was no significant difference between groups A and D. Conclusions : PRGD/FK506/NGF sustained-release nerve conduits are more effective in regenerating nerves than both PRGD/FK506 sustained-release nerve conduits and PRGD/NGF sustained-release nerve conduits. The effect is as good as that of an autograft

MOFs/Ketjen Black-Coated Filter Paper for Spontaneous Electricity Generation from Water Evaporation

Metal-organic frameworks (MOFs) have the advantages of tunable pore sizes and porosity and have demonstrated unique advantages for various applications. This study synthesized composite MOF nanomaterials by modifying MOF801 or AlOOH with UIO66. The composite nanomaterials, UIO66/MOF801 and UIO66/AlOOH showed increased Zeta potential than their pristine form, AlOOH, UIO66 and MOF801. For the first time, the composite MOFs were used to fabricate filter paper-based evaporation-driven power generators for spontaneous electricity generation. The MOFs-KBF membrane was constructed by coating filter paper (10 × 50 mm) with composite MOFs and conductive Ketjen Black. The UIO66/MOF801 decorated device achieved a maximum open circuit voltage of 0.329 ± 0.005 V and maximum output power of 2.253 μW. The influence of salt concentration (0.1–0.5 M) on power generation was also analyzed and discussed. Finally, as a proof-of-concept application, the device was employed as a salinity sensor to realize remote monitoring of salinity. This work demonstrated the potential of flexible MOF composites for spontaneous power generation from water evaporation and provides a potential way to enhance the performance of evaporation-driven power generators

Nitrogen-Doped TiO2 Nanotube Arrays with Enhanced Photoelectrochemical Property

N-doped TiO2 nanotube arrays were prepared by electrochemical anodization in glycerol electrolyte, followed by electrochemical deposition in NH4Cl solution. An orthogonal experiment was used to optimize the doping conditions. Electrolyte concentration, reaction voltage, and reaction time were the main factors to influence the N-doping effect which was the determinant of the visible range photoresponse. The optimal N-doping conditions were determined as follows: reaction voltage is 3 V, reaction time is 2 h, and electrolyte concentration is 0.5 M. The maximal photocurrent enhanced ratio was 30% under white-light irradiation. About 58% improvement of photocatalytic efficiency was achieved in the Rhodamine B degradation experiment by N doping. The kinetic constant of the N-doped TNT arrays sample was almost twice higher than that of the undoped sample. Further analysis by X-ray photoelectron spectroscopy supported that electrochemical deposition is a simple and efficient method for N doping into TiO2 nanotube arrays

Effects of Uptake of Hydroxyapatite Nanoparticles into Hepatoma Cells on Cell Adhesion and Proliferation

Hydroxyapatite nanoparticles (nano-HAPs) were prepared by homogeneous precipitation, and size distribution and morphology of these nanoparticles were determined by laser particle analysis and transmission electron microscopy, respectively. Nano-HAPs were uniformly distributed, with rod-like shapes sizes ranging from 44.6 to 86.8 nm. Attached overnight, suspended, and proliferating Bel-7402 cells were repeatedly incubated with nano-HAPs. Inverted microscopy, transmission electron microscopy, and fluorescence microscopy were used to observe the cell adhesion and growth, the culture medium containing nano-HAPs, the cell ultrastructure, and intracellular Ca2+ labeled with a fluo-3 calcium fluorescent probe. The results showed that nano-HAPs inhibited proliferation of Bel-7402 cells and, caused an obvious increase in the concentration of intracellular Ca2+, along with significant changes in the cell ultrastructure. Moreover, nano-HAPs led suspended cells and proliferating cells after trypsinized that did not attach to the bottom of the culture bottle died. Nano-HAPs continuously entered these cells. Attached, suspended, and proliferating cells endocytosed nano-HAPs, and nanoparticle-filled vesicles were in the cytoplasm. Therefore, hepatoma cellular uptake of nano-HAPs through endocytosis was very active and occurred continuously. Nano-HAPs affected proliferation and adhesion of hepatoma cells probably because uptake of nano-HAPs blocked integrin-mediated cell adhesion, which may have potential significance in inhibiting metastatic cancer cells to their target organ

Degradation characteristics, cell viability and host tissue responses of PDLLA-based scaffold with PRGD and β-TCP nanoparticles incorporation

This study is aimed to evaluate the degradation characteristics, cell viability and host tissue responses of PDLLA/PRGD/beta-TCP (PRT) composite nerve scaffold, which was fabricated by poly(D, L-lactic acid) (PDLLA), RGD peptide(Gly-Arg-Gly-Asp-Tyr, GRGDY, abbreviated as RGD) modified poly-{(lactic acid)-co-[(glycolic acid)-alt-(L-lysine)]}(PRGD) and beta-tricalcium phosphate (beta-TCP). The scaffolds' in vitro degradation behaviors were investigated in detail by analysing changes in weight loss, pH and morphology. Then, the 3-(4,5-dimethyl-2-thiazolyl) -2,5-diphenyl-2 -H-tetrazolium bromide (MTT) assay and cell live/dead assay were carried out to assess their cell viability. Moreover, in vivo degradation patterns and host inflammation responses were monitored by subcutaneous implantation of PRT scaffold in rats. Our data showed that, among the tested scaffolds, the PRT scaffold had the best buffering capacity (pH - 6.1-6.3) and fastest degradation rate (12.4%, 8 weeks) during in vitro study, which was contributed by the incorporation of beta-TCP nanoparticles. After in vitro and in vivo degradation, the high porosity structure of PRT could be observed using scanning electron microscopy. Meanwhile, the PRT scaffold could significantly promote cell survival. In the PRT scaffold implantation region, less inflammatory cells (especially for neutrophil and lymphocyte) could be detected. These results indicated that the PRT composite scaffold had a good biodegradable property; it could improve cells survival and reduced the adverse host tissue inflammation responses.Open Access JournalThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]

The Design of a Safe Charging System Based on PKS Architecture

With the development of new energy vehicles, information sharing and charging service-sharing in the Internet of Vehicles have become popular directions in smart city research. The number of new energy vehicles has surged, and the ensuing range anxiety and low charging efficiency have become the main problems to be solved urgently in charging services. In the era of big data, privacy leakage is becoming more and more serious, and information security and privacy protection cannot be delayed. This paper proposes an efficient charging and privacy protection system based on the PKS system. The original single-stage topology is improved by adding the PFC and LLC circuit topologies. The PID method is used to precisely control the voltage and current loss to improve the conversion efficiency of the charging pile. The private data in the shared information uses the RSA encryption algorithm to prevent the leakage of private data and enhance the security of system communication. This paper aims to improve the charging efficiency of charging piles and the security of private information in network communication. Simulation experiments are carried out on the proposed hardware topology and software encryption system scheme. Experiments compare the waveform state of the improved output current and voltage and the safety protection area of the system architecture. The results show that the proposed charging system is efficient and safe