Temperature dependence of the electrical conductivity of imidazolium ionic liquids.

The electrical conductivities of 1-alkyl-3-methylimidazolium tetrafluoroborate ionic liquids and of 1-hexyl-3-methylimidazolium ionic liquids with different anions were determined in the temperature range between 123 and 393 K on the basis of dielectric measurements in the frequency range from 1 to 10^7 Hz. Most of the ionic liquids form a glass and the conductivity values obey the Vogel-Fulcher-Tammann equation. The glass transition temperatures are increasing with increasing length of the alkyl chain. The fragility is weakly dependent on the alkyl chain length but is highly sensitive to the structure of the anion.ionic liquids; molten salts;

Human Intestinal Organoids and Microphysiological Systems for Modeling Radiotoxicity and Assessing Radioprotective Agents

Radiotherapy is a commonly employed treatment for colorectal cancer, yet its radiotoxicity-related impact on healthy tissues raises significant health concerns. This highlights the need to use radioprotective agents to mitigate these side effects. This review presents the current landscape of human translational radiobiology, outlining the limitations of existing models and proposing engineering solutions. We delve into radiotherapy principles, encompassing mechanisms of radiation-induced cell death and its influence on normal and cancerous colorectal cells. Furthermore, we explore the engineering aspects of microphysiological systems to represent radiotherapy-induced gastrointestinal toxicity and how to include the gut microbiota to study its role in treatment failure and success. This review ultimately highlights the main challenges and future pathways in translational research for pelvic radiotherapy-induced toxicity. This is achieved by developing a humanized in vitro model that mimics radiotherapy treatment conditions. An in vitro model should provide in-depth analyses of host-gut microbiota interactions and a deeper understanding of the underlying biological mechanisms of radioprotective food supplements. Additionally, it would be of great value if these models could produce high-throughput data using patient-derived samples to address the lack of human representability to complete clinical trials and improve patients’ quality of life

Avascular Necrosis of the Foot and Ankle in a Patient with Systemic Sclerosis: A Case Based Review

This review describes a case of atraumatic avascular necrosis in the foot and ankle in a patient with systemic sclerosis who did not receive corticosteroid therapy. Both avascular necrosis and systemic sclerosis are uncommon disease entities. This case demonstrates that vasculitis and secondary vasoconstriction in the pathogenesis of systemic sclerosis are important risk factors for the development of avascular necrosis of the foot and ankle. Therefore, if these patients develop chronic foot and ankle pain, avascular necrosis should be included in the differential diagnosis, even if they do not receive corticosteroids. For the diagnosis and follow-up of avascular necrosis MRI remains the gold standard. Thus, MRI should be used to diagnose avascular necrosis in an early stage. Level of Clinical Evidence: 4.This review describes a case of atraumatic avascular necrosis in the foot and ankle in a patient with systemic sclerosis who did not receive corticosteroid therapy. Both avascular necrosis and systemic sclerosis are uncommon disease entities. This case demonstrates that vasculitis and secondary vasoconstriction in the pathogenesis of systemic sclerosis are important risk factors for the development of avascular necrosis of the foot and ankle. Therefore, if these patients develop chronic foot and ankle pain, avascular necrosis should be included in the differential diagnosis, even if they do not receive corticosteroids. For the diagnosis and follow-up of avascular necrosis MRI remains the gold standard. Thus, MRI should be used to diagnose avascular necrosis in an early stage. Level of Clinical Evidence: 4

Production of alkenes and novel secondary products by P450 OleT JE using novel H2O2-generating fusion protein systems

Jeotgalicoccus sp. 8456 OleTJE (CYP152L1) is a fatty acid decarboxylase cytochrome P450 that uses hydrogen peroxide (H2O2) to catalyse production of terminal alkenes, which are industrially important chemicals with biofuel applications. We report enzyme fusion systems in which Streptomyces coelicolor alditol oxidase (AldO) is linked to OleTJE. AldO oxidizes polyols (including glycerol), generating H2O2 as a co-product and facilitating its use for efficient OleTJE-dependent fatty acid decarboxylation. AldO activity is regulatable by polyol substrate titration, enabling control over H2O2 supply to minimise oxidative inactivation of OleTJE and prolong activity for increased alkene production. We also use these fusion systems to generate novel products from secondary turnover of 2-OH and 3-OH myristic acid primary products, expanding the catalytic repertoire of OleTJE

How Advanced Change Patterns Impact the Process of Process Modeling

Process model quality has been an area of considerable research efforts. In this context, correctness-by-construction as enabled by change patterns provides promising perspectives. While the process of process modeling (PPM) based on change primitives has been thoroughly investigated, only little is known about the PPM based on change patterns. In particular, it is unclear what set of change patterns should be provided and how the available change pattern set impacts the PPM. To obtain a better understanding of the latter as well as the (subjective) perceptions of process modelers, the arising challenges, and the pros and cons of different change pattern sets we conduct a controlled experiment. Our results indicate that process modelers face similar challenges irrespective of the used change pattern set (core pattern set versus extended pattern set, which adds two advanced change patterns to the core patterns set). An extended change pattern set, however, is perceived as more difficult to use, yielding a higher mental effort. Moreover, our results indicate that more advanced patterns were only used to a limited extent and frequently applied incorrectly, thus, lowering the potential benefits of an extended pattern set

Visualization of poly(ADP-ribose) bound to PARG reveals inherent balance between exo- and endo-glycohydrolase activities

Poly-ADP-ribosylation is a post-translational modification that regulates processes involved in genome stability. Breakdown of the poly(ADP-ribose) (PAR) polymer is catalysed by poly(ADP-ribose) glycohydrolase (PARG), whose endo-glycohydrolase activity generates PAR fragments. Here we present the crystal structure of PARG incorporating the PAR substrate. The two terminal ADP-ribose units of the polymeric substrate are bound in exo-mode. Biochemical and modelling studies reveal that PARG acts predominantly as an exo-glycohydrolase. This preference is linked to Phe902 (human numbering), which is responsible for low-affinity binding of the substrate in endo-mode. Our data reveal the mechanism of poly-ADP-ribosylation reversal, with ADP-ribose as the dominant product, and suggest that the release of apoptotic PAR fragments occurs at unusual PAR/PARG ratios

Structure and mechanism of a canonical poly(ADP-ribose) glycohydrolase

Poly(ADP-ribosyl)ation is a reversible post-translational protein modification involved in the regulation of a number of cellular processes including DNA repair, chromatin structure, mitosis, transcription, checkpoint activation, apoptosis and asexual development. The reversion of poly(ADP-ribosyl)ation is catalysed by poly(ADP-ribose) (PAR) glycohydrolase (PARG), which specifically targets the unique PAR (1''-2') ribose-ribose bonds. Here we report the structure and mechanism of the first canonical PARG from the protozoan Tetrahymena thermophila. In addition, we reveal the structure of T. thermophila PARG in a complex with a novel rhodanine-containing mammalian PARG inhibitor RBPI-3. Our data demonstrate that the protozoan PARG represents a good model for human PARG and is therefore likely to prove useful in guiding structure-based discovery of new classes of PARG inhibitors

Are quasars accreting at super-Eddington rates?

In a previous paper, Collin & Hur\'e (2001), using a sample of Active Galactic Nuclei (AGN) where the mass has been determined by reverberation studies (Kaspi et al. 2000), have shown that if the optical luminosity is emitted by a steady accretion disc, about half of the objects are accreting close to or higher than the Eddington rate. We conclude here that this result is unavoidable, unless the masses are strongly underestimated by reverberation studies, which does not seem to be the case. There are three issues to the problem: 1. Accretion proceeds at Eddington or super-Eddington rates through thick discs. Several consequences follow: an anti-correlation between the line widths of the lines and the Eddington ratios, and a decrease of the Eddington ratio with an increasing black hole mass. Extrapolated to all quasars, these results imply that the amount of mass locked in massive black holes should be larger than presently thought. 2. The optical luminosity is not produced directly by the gravitational release of energy, and super-Eddington rates are not required. The optical luminosity has to be emitted by a dense and thick medium located at large distances from the center (10$^3$ to $10^4$ gravitational radii). It can be due to reprocessing of the X-ray photons from the central source in a geometrically thin warped disc, or in dense "blobs" forming a geometrically thick system, which can be a part of the accretion flow or the basis of an outflow. 3. Accretion discs are completely "non standard". Presently neither the predictions of models nor the observed spectral distributions are sufficient to help choosing between these solutions.Comment: 16 pages, 11 figures, accepted in A&

EURL-HM-22 Proficiency test report: Determination of total As, Cd, Pb, Hg, MeHg and inorganic As in fish

The European Union Reference Laboratory for Heavy Metals in Feed and Food (EURL-HM) organised a proficiency test (EURL-HM-22) for the determination of total As, Cd, Pb, Hg and inorganic As (iAs) in fish to support the Commission Regulation (EC) 1881/2006 setting maximum levels for certain contaminants in foodstuffs. This PT was open only to National Reference Laboratories (NRLs). The reference material "IAEA-436" (Tuna fish flesh homogenate) was used as test item. The finely ground dry powder material was rebottled, relabelled and dispatched to the participants. The reference values of interest were provided by the IAEA, together with an informative value for total Pb. The University of Graz (Austria) was requested to analyse the mass fraction of iAs in the material and reported a truncated value ("less than" 0.005 mg kg-1). Forty two participants from 30 countries registered to the exercise (all EU Member States plus Iceland and Norway). Only one participant could not report results due to technical instrumental problems. Laboratory results were rated using z- (z'- for MeHg) and zeta scores in accordance with ISO 13528:2015. The following relative standard deviations for proficiency assessment (σpt) were set according to the modified Horwitz equation: 13% for total Hg and MeHg; 15% for total As; and 22% for total Cd. No scoring was provided for total Pb and iAs. More than 92% of the participating NRLs reported satisfactory results (according to the z-score) for total As, Cd, Hg and MeHg, thus confirming their ability in monitoring the maximum levels set by the European Regulation (EC) No 1881/2006 for fish commodities. However, only 9 (out of 41) participants reported results for MeHg. Most of the laboratories provided realistic estimates of their measurement uncertainties.JRC.F.5-Food and Feed Complianc