Rapid Estimation of Left Ventricular Contractility with a Physics-Informed Neural Network Inverse Modeling Approach

Physics-based computer models based on numerical solution of the governing equations generally cannot make rapid predictions, which in turn, limits their applications in the clinic. To address this issue, we developed a physics-informed neural network (PINN) model that encodes the physics of a closed-loop blood circulation system embedding a left ventricle (LV). The PINN model is trained to satisfy a system of ordinary differential equations (ODEs) associated with a lumped parameter description of the circulatory system. The model predictions have a maximum error of less than 5% when compared to those obtained by solving the ODEs numerically. An inverse modeling approach using the PINN model is also developed to rapidly estimate model parameters (in $\sim$ 3 mins) from single-beat LV pressure and volume waveforms. Using synthetic LV pressure and volume waveforms generated by the PINN model with different model parameter values, we show that the inverse modeling approach can recover the corresponding ground truth values, which suggests that the model parameters are unique. The PINN inverse modeling approach is then applied to estimate LV contractility indexed by the end-systolic elastance $E_{es}$ using waveforms acquired from 11 swine models, including waveforms acquired before and after administration of dobutamine (an inotropic agent) in 3 animals. The estimated $E_{es}$ is about 58% to 284% higher for the data associated with dobutamine compared to those without, which implies that this approach can be used to estimate LV contractility using single-beat measurements. The PINN inverse modeling can potentially be used in the clinic to simultaneously estimate LV contractility and other physiological parameters from single-beat measurements

High speed synchrotron X-ray imaging studies of the ultrasound shockwave and enhanced flow during metal solidification processes

The highly dynamic behaviour of ultrasonic bubble implosion in liquid metal, the multiphase liquid metal flow containing bubbles and particles, and the interaction between ultrasonic waves and semisolid phases during solidification of metal were studied in situ using the complementary ultrafast and high speed synchrotron X-ray imaging facilities housed respectively at the Advanced Photon Source, Argonne National Laboratory, US, and Diamond Light Source, UK. Real-time ultrafast X-ray imaging of 135,780 frames per second (fps) revealed that ultrasonic bubble implosion in a liquid Bi-8 wt. %Zn alloy can occur in a single wave period (30 kHz), and the effective region affected by the shockwave at implosion was 3.5 times the original bubble diameter. Furthermore, ultrasound bubbles in liquid metal move faster than the primary particles, and the velocity of bubbles is 70 ~ 100% higher than that of the primary particles present in the same locations close to the sonotrode. Ultrasound waves can very effectively create a strong swirling flow in a semisolid melt in less than one second. The energetic flow can detach solid particles from the liquid-solid interface and redistribute them back into the bulk liquid very effectively

Quantification of Biventricular Strains in Heart Failure With Preserved Ejection Fraction Patient Using Hyperelastic Warping Method

Heart failure (HF) imposes a major global health care burden on society and suffering on the individual. About 50% of HF patients have preserved ejection fraction (HFpEF). More intricate and comprehensive measurement-focused imaging of multiple strain components may aid in the diagnosis and elucidation of this disease. Here, we describe the development of a semi-automated hyperelastic warping method for rapid comprehensive assessment of biventricular circumferential, longitudinal, and radial strains that is physiological meaningful and reproducible. We recruited and performed cardiac magnetic resonance (CMR) imaging on 30 subjects [10 HFpEF, 10 HF with reduced ejection fraction patients (HFrEF) and 10 healthy controls]. In each subject, a three-dimensional heart model including left ventricle (LV), right ventricle (RV), and septum was reconstructed from CMR images. The hyperelastic warping method was used to reference the segmented model with the target images and biventricular circumferential, longitudinal, and radial strain–time curves were obtained. The peak systolic strains are then measured and analyzed in this study. Intra- and inter-observer reproducibility of the biventricular peak systolic strains was excellent with all ICCs > 0.92. LV peak systolic circumferential, longitudinal, and radial strain, respectively, exhibited a progressive decrease in magnitude from healthy control→HFpEF→HFrEF: control (-15.5 ± 1.90, -15.6 ± 2.06, 41.4 ± 12.2%); HFpEF (-9.37 ± 3.23, -11.3 ± 1.76, 22.8 ± 13.1%); HFrEF (-4.75 ± 2.74, -7.55 ± 1.75, 10.8 ± 4.61%). A similar progressive decrease in magnitude was observed for RV peak systolic circumferential, longitudinal and radial strain: control (-9.91 ± 2.25, -14.5 ± 2.63, 26.8 ± 7.16%); HFpEF (-7.38 ± 3.17, -12.0 ± 2.45, 21.5 ± 10.0%); HFrEF (-5.92 ± 3.13, -8.63 ± 2.79, 15.2 ± 6.33%). Furthermore, septum peak systolic circumferential, longitudinal, and radial strain magnitude decreased gradually from healthy control to HFrEF: control (-7.11 ± 1.81, 16.3 ± 3.23, 18.5 ± 8.64%); HFpEF (-6.11 ± 3.98, -13.4 ± 3.02, 12.5 ± 6.38%); HFrEF (-1.42 ± 1.36, -8.99 ± 2.96, 3.35 ± 2.95%). The ROC analysis indicated LV peak systolic circumferential strain to be the most sensitive marker for differentiating HFpEF from healthy controls. Our results suggest that the hyperelastic warping method with the CMR-derived strains may reveal subtle impairment in HF biventricular mechanics, in particular despite a “normal” ventricular ejection fraction in HFpEF

Ultrafast synchrotron X-ray imaging studies of microstructure fragmentation in solidification under ultrasound

Ultrasound processing of metal alloys is an environmental friendly and promising green technology for liquid metal degassing and microstructural refinement. However many fundamental issues in this field are still not fully understood, because of the difficulties in direct observation of the dynamic behaviours caused by ultrasound inside liquid metal and semisolid metals during the solidification processes. In this paper, we report a systematic study using the ultrafast synchrotron X-ray imaging (up to 271,554 frame per second) technique available at the Advanced Photon Source, USA and Diamond Light Source, UK to investigate the dynamic interactions between the ultrasonic bubbles/acoustic flow and the solidifying phases in a Bi-8%Zn alloy. The experimental results were complimented by numerical modelling. The chaotic bubble implosion and dynamic bubble oscillations were revealed in-situ for the first time in liquid metal and semisolid metal. The fragmentation of the solidifying Zn phases and breaking up of the liquid-solid interface by ultrasonic bubbles and enhanced acoustic flow were clearly demonstrated and agreed very well with the theoretical calculations. The research provides unambiguous experimental evidence and robust theoretical interpretation in elucidating the dominant mechanisms of microstructure fragmentation and refinement in solidification under ultrasound.The authors would like to acknowledge the financial support from the UK Engineering and Physical Sciences Research Council (Grant No. EP/L019965/1, EP/L019884/1, EP/L019825/1,), the Royal Society Industry Fellowship (for J. Mi), and the Hull University & Chinese Scholarship Council (Hull-CSC) PhD Studentship (for D. Tan). The awards of the synchrotron X-ray beam time (EE8542-1) by the Diamond Light Source, UK, and those (GUP 23649 and GUP 26170) by the Advanced Photon Source, Argonne National Laboratory, USA are also gratefully acknowledged. Use of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, was supported by the U.S. DOE under Contract No. DE-AC02-06CH11357

DESIGN AND OPTIMIZATION OF A HARD DISK DRIVE SUSPENSION

Master'sMASTER OF SCIENCE IN HIGH PERFORMANCE COMPUTATION FOR ENGINEERED SYSTEM