To Standardise Parameters for Preparation of Extruded Feed Using Various Conventional and Non-Conventional Ingredients

The purpose of this research was to optimise extruder parameters for the preparation of floating fish diets with appropriate physicochemical qualities. The impact of temperature (90-120oC), moisture content (15%-30%), die diameter (2.0-4.0 mm) and pre-conditioning duration (15-30 m) on physical properties of the pellets such as bulk density, floatability, expansion ratio and water stability, were examined. Accordingly, four iso-nitrogenous (crude protein 35%) experimental diets were formulated for GIFT tilapia advance fry by replacing 50% of GNOC protein of the control diet (T0) by sunflower oilcake (SFOC) (T1), by linseed oilcake (LSOC) (T2) and by fish based silage (T3) protein. The pellets extruded using a combination of 120 oC extruder barrel temperature, 25% moisture content of feed mix, 2.0 mm die diameter and 30 minute of pre-conditioning duration gave most required pellet floatability (90-100%), expansion ratio (1.43-1.61), water stability (95-99%) and bulk density (0.8 - 0.9 g/cm3) for T1 and T2. However, fish silage when incorporated in the feed mix, it affected negatively in all the physical characteristics of a floating feed and resulted in higher bulk density and lower floatability, expansion ratio and also water stability

Moisture Sources for Precipitation and Hydrograph Components of the Sutri Dhaka Glacier Basin, Western Himalayas

Himalayan glaciers are the major source of fresh water supply to the Himalayan Rivers, which support the livelihoods of more than a billion people living in the downstream region. However, in the face of recent climate change, these glaciers might be vulnerable, and thereby become a serious threat to the future fresh water reserve. Therefore, special attention is required in terms of understanding moisture sources for precipitation over the Himalayan glaciers and the hydrograph components of streams and rivers flowing from the glacierized region. We have carried out a systematic study in one of the benchmark glaciers, “Sutri Dhaka” of the Chandra Basin, in the western Himalayas, to understand its hydrograph components, based on stable water isotopes (δ18O and δ2H) and field-based ablation measurements. Further, to decipher moisture sources for precipitation and its variability in the study region, we have studied stable water isotopes in precipitation samples (rain and snow), and performed a back-trajectory analysis of the air parcel that brings moisture to this region. Our results show that the moisture source for precipitation over the study region is mainly derived from the Mediterranean regions (>70%) by Western Disturbances (WDs) during winter (October–May) and a minor contribution (<20%) from the Indian Summer Monsoon (ISM) during summer season (June–September). A three-component hydrograph separation based on δ18O and d-excess provides estimates of ice (65 ± 14%), snowpack (15 ± 9%) and fresh snow (20 ± 5%) contributions, respectively. Our field-based specific ablation measurements show that ice and snow melt contributions are 80 ± 16% and 20 ± 4%, respectively. The differences in hydrograph component estimates are apparently due to an unaccounted snow contribution ‘missing component’ from the valley slopes in field-based ablation measurements, whereas the isotope-based hydrograph separation method accounts for all the components, and provides a basin integrated estimate. Therefore, we suggest that for similar types of basins where contributions of rainfall and groundwater are minimal, and glaciers are often inaccessible for frequent field measurements/observations, the stable isotope-based method could significantly add to our ability to decipher moisture sources and estimate hydrograph components