1,717 research outputs found

    Structural assessment of modular precast 3D cell mid- to high-rise buildings with different connections

    Get PDF
    Precast construction employing modular 3D cells for housing was developed alongside frame and panel buildings since the end of WWII, mainly in Europe. This technology combined with in-situ concreting of wet joints was employed with a certain success throughout Europe up to the ‘80s, after which it became progressively less popular due to the difficulties in handling transportation (both lifting and shipping due to the large cell dimensions) and limited benefits in construction due to the partial prefabrication, framing its modern application in many countries to relatively small-size building components, such as kitchen/bathroom or service blocks. Thanks to the recent innovations of the precast concrete technology (both in production and structural connections), combined with the market evolution, this technology is nowadays experiencing a renovated interest for mid- and high-rise buildings, especially in Asia, where rapid dry or semi-dry assemblage of the cells ensures the full finishing of the units in factory, and the full exploitation of the benefits induced by the prefabrication process. As a matter of fact, the current literature regarding the structural behaviour of buildings employing this technology is lacking from a robust assessment, especially concerning their seismic performance. As a preliminary attempt to fill this gap, this paper presents the results of traditional seismic analysis with response spectrum carried out on a representative large residential building designed having 6, 12, 18 and 24 storeys modelled with shell elements and spring connections, analysing the limit PGAs associated to each typology and commenting the role of different connection devices and the possible design implications

    Slender precast voided slabs under walking-induced vibration

    Get PDF
    Disturbance/discomfort caused by vibrations, induced by pedestrian walking on slabs in residential/office buildings, is a typical design issue for lightweight slender slabs, including prestressed concrete ones. Precast slabs are typically made with pretensioned members which allow for only partial collaboration in the transverse slab direction, which becomes even less effective when they are dry-assembled without cast-in-situ topping since it relies on the arrangement of mutual mechanical connections only. This study investigates through tests and numerical analyses the response of slender precast long-span slabs made with voided members, dry-assembled with mechanical connections, when subjected to vibrations generated by human activities. A parametric set of dynamic modal and time-history analyses encompassing floor member geometry, connection arrangement, mass, and damping, is carried out. The numerical models are validated against results from an experimental test program carried out on two decks of a prototype precast building. The tests and the numerical models allowed to characterize the fundamental dynamic properties of the slab and its vibrational performance, identifying the most efficient technological solutions among those investigated to mitigate human-induced vibrations

    Características das espécies vegetais dispersas por aves e morcegos e suas implicações na recuperação ou manutenção de ambientes florestais.

    Get PDF
    Editores técnicos: Marcílio José Thomazini, Elenice Fritzsons, Patrícia Raquel Silva, Guilherme Schnell e Schuhli, Denise Jeton Cardoso, Luziane Franciscon. EVINCI. Resumos

    Environmental impact reduction of precast multi-storey buildings by crescent-moon seismic dampers hidden in beam-column joints

    Get PDF
    The growing demand of sustainable precast structures for multi-storey con-structions is often driven by the optimisation of cross-sections and reinforcement volumes of the structural elements. The present paper describes a real building recently designed and assembled with the installation of crescent-moon hysteretic dampers in the beam-column joints, recently proposed and patented. The joint continuity allows for an optimisation of the lateral load resist-ing system, reducing the size of the columns with respect to the classical precast frame structural arrangement with hinged joints, whilst protecting columns and beams from the large actions deriving from the classical moment-resisting cast-in-situ or partially precast technological solu-tions. After the complete detailed design of the case study building employing the 3 solutions described above, the precast dissipative one being designed with dynamic non-linear analysis, the results of an environmental impact analysis are compared and discussed, confirming a reduced environmental impact for the dissipative solution, with respect to both precast with hinged beam-column joints and moment-resisting cast-in-situ alternatives

    How much of nitrogen from fertilizer is absorbed by palisadegrass when intercropped with corn?

    Get PDF
    The study evaluates the influence of Palisadegrass in the use of N fertilizer, according to forms of implantation of Palisadegrass intercropped with corn in Brazil

    From cosmic deceleration to acceleration: new constraints from SN Ia and BAO/CMB

    Full text link
    We use type Ia supernovae (SN Ia) data in combination with recent baryonic acoustic oscillations (BAO) and cosmic microwave background (CMB) observations to constrain a kink-like parametrization of the deceleration parameter (qq). This qq-parametrization can be written in terms of the initial (qiq_i) and present (q0q_0) values of the deceleration parameter, the redshift of the cosmic transition from deceleration to acceleration (ztz_t) and the redshift width of such transition (τ\tau). By assuming a flat space geometry, qi=1/2q_i=1/2 and adopting a likelihood approach to deal with the SN Ia data we obtain, at the 68% confidence level (C.L.), that: zt=0.56−0.10+0.13z_t=0.56^{+0.13}_{-0.10}, τ=0.47−0.20+0.16\tau=0.47^{+0.16}_{-0.20} and q0=−0.31−0.11+0.11q_0=-0.31^{+0.11}_{-0.11} when we combine BAO/CMB observations with SN Ia data processed with the MLCS2k2 light-curve fitter. When in this combination we use the SALT2 fitter we get instead, at the same C.L.: zt=0.64−0.07+0.13z_t=0.64^{+0.13}_{-0.07}, τ=0.36−0.17+0.11\tau=0.36^{+0.11}_{-0.17} and q0=−0.53−0.13+0.17q_0=-0.53^{+0.17}_{-0.13}. Our results indicate, with a quite general and model independent approach, that MLCS2k2 favors Dvali-Gabadadze-Porrati-like cosmological models, while SALT2 favors Λ\LambdaCDM-like ones. Progress in determining the transition redshift and/or the present value of the deceleration parameter depends crucially on solving the issue of the difference obtained when using these two light-curve fitters.Comment: 25 pages, 9 figure

    Experimental tests on shallow foundations of onshore wind turbine towers

    Get PDF
    The current effort towards the progressive switch from carbon-based to renewable energy production is leading to a relevant spreading of both on- and off-shore wind turbine towers. Regarding reinforced concrete shallow foundations of onshore wind turbine steel towers, possible reductions of reinforcement may increase their sustainability, speed of erection, and competitiveness. The article presents the results of an experimental program carried out at Politecnico di Milano concerning both cyclic and monotonic loading, simulating extreme wind conditions on 1:15 scaled models of wind turbine steel towers connected by stud bolt adapters to reinforced concrete shallow foundations embedded in a sandy soil. Three couples of foundation specimens were tested with different reinforcement layouts: (a) similar to current praxis, (b) without shear reinforcement, and (c) without shear reinforcement and with 50% of ordinary steel rebars replaced by steel fibers. Additional vertical loads were added to the small-scale models in order to ensure similarity in terms of stresses. The test results allowed to (i) characterize the mechanical behavior of the foundation element considering soil-structure interaction under both service and ultimate load conditions, (ii) assess the foundation failure mode, (iii) highlight the role of each typology of reinforcing bars forming the cage, and (iv) provide hints for the optimization of these latter

    Characterization of risk exposure to carbonyl and furan compounds through wine consumption.

    Get PDF
    The objective of this study was to: (i) quantify acetaldehyde, formaldehyde, ethyl carbamate, furan, furfural and acrolein in wine using headspace-solid phase microextraction (HS-SPME) and comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometric detection (GC×GC/TOFMS) and (ii) characterize the risk of exposure to these toxic compounds through wine consumption
    • …
    corecore